Design of S-Band Antenna With L-Shaped Slits on Rectangular Patch With Defected Ground Structure

2018 ◽  
Vol 7 (2) ◽  
pp. 50-58
Author(s):  
Ketavath Kumar Naik ◽  
Ravi Kumar Palla ◽  
Sriram Sandhya Rani ◽  
Dattatreya Gopi
Keyword(s):  
Resonance Frequency ◽  
Radiation Pattern ◽  
Patch Antenna ◽  
Return Loss ◽  
Impedance Bandwidth ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Rectangular Patch ◽  
Antenna Model

Monopole L-shaped slits are embedded on rectangular patch antenna is designed for S-band applications. The proposed antenna is a square patch radiator with four L-shaped slits are presented. The proposed antenna radiates at 3GHz resonance frequency with bandwidth of 1.9GHz and -26.4dB return loss. The impedance bandwidth is enhanced 62.7% with proposed antenna model. The proposed L-shaped slit patch antenna is small in size and compact. The radiation pattern is presented in the results and it works at S-band applications.

scholarly journals A Novel Circular Slotted Microstrip-Fed Patch Antenna with three Triangle Shape Defected Ground Structure for Multiband Applications

2018 ◽  
Vol 7 (3) ◽  
pp. 56-63 ◽  
Author(s):  
A. Jaiswal ◽  
R. K. Sarin ◽  
B. Raj ◽  
S. Sukhija
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Impedance Matching ◽  
Ground Plane ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Resonant Frequencies ◽  
Wireless Applications ◽  
Rectangular Patch ◽  
Miniaturized Antenna

In this paper, a novel circular slotted rectangular patch antenna with three triangle shape Defected Ground Structure (DGS) has been proposed. Radiating patch is made by cutting circular slots of radius 3 mm from the three sides and center of the conventional rectangular patch structure and three triangle shape defects are presented on the ground layer. The size of the proposed antenna is 38 X 25 mm2. Optimization is performed and simulation results have been obtained using Empire XCcel 5.51 software. Thus, a miniaturized antenna is designed which has three impedance bandwidths of 0.957 GHz,  0.779 GHz, 0.665 GHz with resonant frequencies at 3.33 GHz, 6.97 GHz and 8.59 GHz and the corresponding return loss at the three resonant frequencies are -40 dB, -43 dB and -38.71 dB respectively. A prototype is also fabricated and tested. Fine agreement between the measured and simulated results has been obtained. It has been observed that introducing three triangle shape defects on the ground plane results in increased bandwidth, less return loss, good radiation pattern and better impedance matching over the required operating bands which can be used for wireless applications and future 5G applications.

scholarly journals Compact Broadband Monopole Antenna for C Band Applications

2018 ◽  
Vol 7 (5) ◽  
pp. 118-123 ◽  
Author(s):  
P. Pathak ◽  
P. K. Singhal
Keyword(s):  
Wireless Communication ◽  
Numerical Simulations ◽  
Ieee 802.11 ◽  
Patch Antenna ◽  
Radiation Characteristic ◽  
Impedance Bandwidth ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Rectangular Patch ◽  
Electrical Permittivity

This paper reports a new design of broadband monopole patch antenna. The proposed antenna possess corner truncated rectangular patch with slits and defected ground structure, these modifications considerably improves the impedance bandwidth to 41.29% over a wideband (5.1–7.59 GHz). The design is appropriate for wireless communication including WLAN IEEE 802.11 g/a (5.15–5.35 GHz and 5.725–5.825 GHz) and C Band (4–8 GHz) applications. An antenna prototype is fabricated using FR-4 with an electrical permittivity of 4.4. Experimental and numerical simulations of antenna’s radiation characteristic are also reported and exhibits good concurrence.

Dual-Band Proximity Coupled Feed Microstrip Patch Antenna with ‘T’ Slot on the Radiating Patch and ‘Dumbbell’ Shaped Defected Ground Structure

2016 ◽  
Vol 3 (2) ◽  
pp. 435 ◽  
Author(s):  
Dawit Fitsum ◽  
Dilip Mali ◽  
Mohammed Ismail
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

<p>This paper presents Dual-Band proximity coupled feed rectangular Microstrip patch antenna with slots on the radiating patch and Defected Ground Structure. Initially a simple proximity coupled feed rectangular Microstrip patch antenna resonating at 2.4 GHz is designed. Etching out a ‘Dumbbell’ shaped defect from the ground plane and ‘T’ shaped slot from the radiating patch of the proximity coupled feed rectangular Microstrip patch antenna, results in a Dual-Band operation, i.e., resonating at 2.4 GHz and 4.5 GHz; with 30.3 % and 18.8% reduction in the overall area of the patch and the ground plane of the reference antenna respectively. The proposed antenna resonates in S-band at frequency of 2.4 GHz with bandwidth of 123.6 MHz and C-band at frequency of 4.5 GHz with bandwidth of 200 MHz, and a very good return loss of -22.1818 dB and -19.0839 dB at resonant frequency of 2.4 GHz and 4.5 GHz respectively is obtained. The proposed antenna is useful for different wireless applications in the S-band and C-band.</p>

Circularly Polarized Rectangular Microstrip Patch Antenna with Finite Ground Plane

2015 ◽  
Vol 4 (2) ◽  
pp. 74
Author(s):  
Sanyog Rawat ◽  
Kamlesh Kumar Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Rectangular Patch

<p class="Abstract"><span style="font-weight: normal;">In this paper a new geometry of patch antenna is proposed with improved bandwidth and circular polarization. The radiation performance of circularly polarized rectangular patch antenna is investigated by applying IE3D simulation software and its performance is compared with that of conventional rectangular patch antenna.</span> <span style="font-weight: normal;">Finite Ground truncation technique is used to obtain the desired results. The simulated return loss, axial ratio and smith chart with frequency for the proposed antenna is reported in this paper. It is shown that by selecting suitable ground-plane dimensions, air gap and location of the slits, the impedance bandwidth can be enhanced upto 10.15 % as compared to conventional rectangular patch (4.24%) with an axial ratio bandwidth of 4.05%.</span></p><p> </p><p> </p>

Bandwidth Enhancement of Rectangular Microstrip Patch Antenna using Defected Ground Structure

2016 ◽  
Vol 3 (2) ◽  
pp. 428 ◽  
Author(s):  
Dawit Fitsum ◽  
Dilip Mali ◽  
Mohammed Ismail
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Antenna Structure ◽  
Bandwidth Enhancement ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

<p>This paper presents the bandwidth enhancement of a Proximity Coupled Feed Rectangular Microstrip Patch Antenna using a new Defected Ground Structure - an ‘inverted SHA’ shaped slot on the ground plane of the proximity coupled feed rectangular Microstrip patch antenna. The parameters such as Bandwidth, Return loss, VSWR and Radiation efficiency are improved in the proposed antenna than simple proximity coupled feed rectangular Microstrip patch antenna without Defected Ground Structure. A comparison is also shown for the proposed Microstrip patch antenna with the antenna structure without Defected Ground Structure. The proposed antenna resonates in S-band at frequency of 2.4 GHz with bandwidth of 180 MHz. A very good return loss of -47.9223 dB is obtained for the Microstrip patch antenna with an ’inverted SHA’ shaped Defected Ground Structure. Implementing an ‘inverted SHA’ shaped defect in the ground plane of the proximity coupled feed rectangular Microstrip patch antenna results in 5.3% improvement in bandwidth with 16.01% reduction in the overall area of the ground plane as compared to the Microstrip patch antenna without Defected Ground Structure.</p>

scholarly journals DGS based monopole circular-shaped patch antenna for UWB applications

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Dattatreya Gopi ◽  
Appala Raju Vadaboyina ◽  
J. R. K. Kumar Dabbakuti
Keyword(s):  
Patch Antenna ◽  
Substrate Material ◽  
Impedance Bandwidth ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Compact Structure ◽  
Resonant Frequencies ◽  
Low Profile ◽  
Uwb Applications ◽  
Good Agreement

AbstractA simple low profile defected ground structure based monopole circular-shaped patch antenna is proposing for ultrawide-band applications. The design allows for a simple and compact structure on the FR-4 substrate material. The proposed design initially has a meager antenna gain and bandwidth. To increase the antenna bandwidth and gain, the defective ground structure is implemented with four dumble-shaped slots. Parametric analysis is considered to find the radius of circular patch for tuning of UWB frequency applications. The proposed MCP antenna resonates at 2.9 GHz, 9.1 GHz frequencies with a S11 of − 34.84 dB, − 33.74 dB, respectively, and achieves 8.1 GHz (2.5–10.6 GHz) impedance bandwidth concerning the − 10 dB reference line of the reflection coefficient. The gains are 8.4 dBi, 8.2 dBi for the two resonant frequencies, and the radiation patterns are semi-omnidirectional, omnidirectional. The proposed antenna has-been validated by observing good agreement between the simulation and the measured results.

A compact broadband microstrip patch antenna with defective ground structure for C-Band applications

2014 ◽  
Vol 4 (3) ◽  
Author(s):  
Sanyog Rawat ◽  
K. Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Defected Ground Structure ◽  
Key Factors ◽  
Ground Structure ◽  
Band Frequency ◽  
Microstrip Patch ◽  
Circular Patch Antenna ◽  
Novel Design

AbstractA novel design of a circular patch antenna having defected ground structure is presented in this communication. The antenna is designed for C-band applications. A wide bandwidth of 60.3% (4.04–7.28) GHz is obtained in the C-band frequency range 4–8 GHz. It is also found through parametric analysis that shape and dimensions of the finite ground plane and slots in the patch are the key factors in improving the bandwidth of the proposed geometry. The antenna is fabricated using FR-4 substrate and parameters like return loss, VSWR and input impedance are measured experimentally.

scholarly journals Microstrip patch antenna with defected ground structure for biomedical application

2019 ◽  
Vol 8 (2) ◽  
pp. 586-595 ◽  
Author(s):  
Md. Shazzadul Islam ◽  
Muhammad I. Ibrahimy ◽  
S. M. A. Motakabber ◽  
A. K. M. Zakir Hossain ◽  
S. M. Kayser Azam
Keyword(s):  
Patch Antenna ◽  
Single Channel ◽  
Biomedical Application ◽  
Low Cost ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Ism Band ◽  
Microstrip Patch

Proper narrowband antenna design for wearable devices in the biomedical application is a significant field of research interest. In this work, defected ground structure-based microstrip patch antenna has been proposed that can work for narrowband applications. The proposed antenna works exactly for a single channel of ISM band. The resonant frequency of the antenna is 2.45 GHz with a return loss of around -30 dB. The -10dB impedance bandwidth of the antenna is 20 MHz (2.442-2.462 GHz), which is the bandwidth of channel 9 in ISM band. The antenna has achieved a high gain of 7.04 dBi with an increase of 17.63% antenna efficiency in terms of realized gain by using defected ground structure. Three linear vector arrays of arrangement 1 2, 1 4 and 1 8 have been designed to validate the proposed antenna performances as an array. The proposed antenna is light weighted, low cost, easy to fabricate and with better performances that makes it suitable for biomedical WLAN applications.

scholarly journals Miniaturized Dual-Band Dual-Mode Microstrip Patch Antenna with Defected Ground Structure for Wearable Applications

2021 ◽  
Vol 2 (2) ◽  
Author(s):  
Nur Azura Shamsudin ◽  
◽  
Shaharil Mohd Shah ◽  
Keyword(s):  
Resonant Frequency ◽  
Radiation Pattern ◽  
Human Tissue ◽  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Dual Mode ◽  
Microstrip Patch

This work presents the performance of a miniaturized dual-band dual-mode microstrip patch antenna with Defected Ground Structure (DGS) at 2.45 GHz and 5.8 GHz on the stacked substrate configuration in the order of FR-4 – PDMS- FR-4. The antenna offers a promising solution for wearable applications in the ISM bands. The first substrate is a flexible Flame Retardant 4 (FR-4) and the other substrate is a highly flexible Polydimethyl Siloxane (PDMS). The size of the antenna was reduced from 50 × 50 mm2 to 30 × 30 mm2, by introducing DGS on the ground plane. A single U-slot on the rectangular radiating patch was introduced to produce the upper resonant frequency of 5.8 GHz while the existing square patch is to generate the lower resonant frequency of 2.45 GHz. The simulations on the dual-band dual-mode microstrip patch antenna shows the reflection coefficient, S11 at 2.45 GHz is -17.848 dB with a bandwidth of 278.8 MHz and -13.779 dB with a bandwidth of 273 MHz at 5.8 GHz. A unidirectional radiation pattern observed in the E-plane shows that the antenna could be applied for off-body communication while an omnidirectional radiation pattern in the H-plane showed that the antenna can be used for on-body communication. Bending investigation were performed for the antenna over a vacuum cylinder with varying diameters of 50 mm, 60 mm, 70 mm, 80 mm, 90 mm, 100 mm and 120 mm in the CST MWS® software. From the graph of reflection coefficients, the performance of the antenna were not affected in bending condition. The SAR simulations showed that the SAR limits obey the guidelines as stipulated by the Federal Communication Commission (FCC) and the International Commission on Non-Ionizing Radiation Protection (ICNIRP) for 1 mW of input power. The 2.45 GHz SAR limit for 1 g of human tissue is 0.09007 W/kg (FCC standard: < 1.6 W/kg) while for 10 g is 0.01867 W/kg (ICNIRP standard: < 2 W/kg). For 5.8 GHz, the SAR limit for 1 g of human tissue is 0.115 W/kg and for 10 g is 0.03517 W/kg. Based on the performance of the antenna in bending condition and the SAR limits, it is safe to conclude that the antenna can be used for wearable applications at 2.45 GHz and 5.8 GHz of the ISM bands.

Sign in / Sign up

Export Citation Format

Share Document