A Conceptual Organization for Websites Metrics and E-Government Websites

2012 ◽  
Vol 4 (1) ◽  
pp. 93-117 ◽  
Author(s):  
Izzat Alsmadi ◽  
Mohammed Al-Kabi ◽  
Abdullah Wahbeh
Keyword(s):  
Quality Attributes ◽  
Sensitive Data ◽  
Continuous Evaluation ◽  
Domain Type ◽  
Conceptual Organization ◽  
Significant Damage ◽  
Security And Reliability ◽  
Government Websites ◽  
User Friendly

E-government websites contain sensitive and important information where security and reliability are crucial. However, due to the large number of visitors, they are expected to be user friendly and provide services quickly. There are several methods to evaluate websites. Quality attributes of a website depend on several characteristics such as: its domain, type of information, and services it provides. This paper examines several e-government websites in Jordan for a comprehensive list of possible metrics, attributes and tools for evaluating websites. Websites and tools that can gather the described metrics are used to compare results. Results showed that such metrics have important information related to the overall properties and quality of those websites. This paper examines this list of metrics to evaluate e-government websites because such websites should have a combination of several high quality attributes that most other websites may not need to have. Similar to e-commerce websites, they need to provide high end quick secure services to a large number of users. Further, due to the type of sensitive data that they hold, they can be targets for a large number of hackers or invaders. Without the continuous evaluation and assessment for all required attributes such websites may fail catastrophically and cause a significant damage to data and reputation.

Usability Evaluation of E-Government Websites in Saudi Arabia by Cognitive Walkthrough

2017 ◽  
pp. 297-312 ◽  
Author(s):  
Hina Gull ◽  
Sardar Zafar Iqbal
Keyword(s):  
Saudi Arabia ◽  
Effective Communication ◽  
Usability Evaluation ◽  
Clear Picture ◽  
Time Saving ◽  
Governmental Organizations ◽  
Full Benefit ◽  
Government Websites ◽  
User Friendly

Government websites are the easy sources of getting access to the services offered by governmental organizations. These websites provide manifold benefits to their users i.e. efficiency of use, cost decline, effective communication between citizens and government, delivery of different service, transparency and time saving. However, users cannot get full benefit out of these services if the e-government websites are not interactive and user friendly. Keeping this view into consideration, study investigated the usability concerns of the e-government websites in Saudi Arabia. Cognitive walk-through is selected as the implication method to figure out usability related traits by the real users of the interfaces. Findings from the study showed that these websites are partially usable for the users, as they lack some of the major concerns of the usability. Evaluation results showed the clear picture of the usability features of the selected websites of Saudi Arabia both in positive and negative ways. Furthermore, recommendations are given to improve overall quality of these websites.

Assessing the Quality of E-Government Websites in Uganda

2021 ◽  
Vol 10 (1) ◽  
pp. 42-56
Author(s):  
Agnes Rwashana Semwanga ◽  
Evelyn Kigozi Kahiigi
Keyword(s):  
Cost Effective ◽  
Quality Attributes ◽  
Security And Privacy ◽  
Web Based ◽  
Observation Instrument ◽  
Text Organization ◽  
Quality Dimensions ◽  
Government Websites ◽  
Use Of Social Media

Governments are increasingly using web-based portals to provide information and cost-effective service delivery. While some e-government websites have delivered the intended goal, others are still struggling. This study assessed the quality of the e-government websites using a three-step investigation methodology. Firstly, the quality attributes were generated from literature, then a conceptual framework for e-government websites with four quality dimensions was developed, and lastly, an observation instrument was used to measure the quality attributes of 78 Uganda e-government websites. Most of the websites scored highly on the level of authority, relevance, quality of text, organization of the website, and time to download. The level of attractiveness, content accuracy, objectivity, currency of information, use of multimedia, and multi-language required significant improvements while the use of social media and evidence of security and privacy of the information was hardly visible. A framework is proposed to improve the quality of e-government websites.

Electrical Damage Due to Low Energy Plasma Processing of GaAs Structures

1991 ◽  
Vol 223 ◽  
Author(s):  
Hans P. Zappe ◽  
Gudrun Kaufel
Keyword(s):  
Chemical Processes ◽  
Low Energy ◽  
Electrical Behavior ◽  
Rapid Thermal Anneal ◽  
High Temperature Anneal ◽  
Significant Damage ◽  
Low Energies ◽  
Long Time ◽  
Physical Plasma

ABSTRACTThe effect of numerous plasma reative ion etch and physical milling processes on the electrical behavior of GaAs bulk substrates has been investigated by means of electric microwave absorption. It was seen that plasma treatments at quite low energies may significantly affect the electrical quality of the etched semiconductor. Predominantly physical plasma etchants (Ar) were seen to create significant damage at very low energies. Chemical processes (involving Cl or F), while somewhat less pernicious, also gave rise to electrical substrate damage, the effect greater for hydrogenic ambients. Whereas rapid thermal anneal treatments tend to worsen the electrical integrity, some substrates respond positively to long-time high temperature anneal steps.

The Impact of Insect Infestation on Stored Purpled Cocoa Beans

2018 ◽  
Vol 1 (3) ◽  
pp. 176-181 ◽  
Author(s):  
E. Tettey
Keyword(s):  
Weight Loss ◽  
Insect Population ◽  
Insect Infestation ◽  
Percentage Weight Loss ◽  
Cocoa Beans ◽  
Significant Damage ◽  
Percentage Weight ◽  
Fermentation Period ◽  
The Impact

Under-fermentation of cocoa beans produces purple beans. The fermentation period is 6 to 7 days but some cocoa farmersunder-ferment their cocoa beans leading to the development of purple cocoa beans. This study determined the impact of insectinfestation on stored purple cocoa beans. Wet cocoa beans were fermented for 1, 2, 3, 4 and 5 days to produce the purple beans.Ephestia cautella and Tribolium castaneum, both singly and in combination, were introduced into the cocoa beans and storedfor different (30, 60, 90 and 120 days) period. Insect population, percentage weight loss and the contaminants produced bythese insects were determined. Cocoa beans infested with E. cautella alone had the highest population of 297.0 ± 22.7. Beansfermented for 3 days had the lowest insect population both singly and in combination after 120 days of storage. The highestpercentage weight loss was recorded in cocoa beans fermented for one day (10.1 ± 1.87%) and 4 days (10.1 ± 8.74%). T.castaneum did not cause much damage to the cocoa beans but E. cautella alone caused significant damage to stored cocoabeans. Insect infestation and poor fermentation contribute significantly to the reduction in quality of cocoa beans.

Nondestructive Quality Evaluation of Tomatoes

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 544c-544
Author(s):  
A. Hakim ◽  
A. Purvis ◽  
E. Pehu ◽  
I. Voipio ◽  
E. Kaukovirta
Keyword(s):  
Quality Evaluation ◽  
Tomato Fruit ◽  
Quality Attributes ◽  
Internal Quality ◽  
Attractive Alternative ◽  
Fluorescence Techniques ◽  
Nondestructive Quality ◽  
Alternative Techniques ◽  
Evaluation Techniques

Both external and internal quality of fruits such as tomatoes can be evaluated by different methods, but all most all of the methods are destructive. For this reason, there is a need to reassess some of the alternative techniques. Nondestructive quality evaluation is an attractive alternative. The principles of different nondestructive quality evaluation techniques such as optical, physical, and fluorescence techniques applied to tomato fruit is explained. Successful application of these techniques that could be used for evaluation of different quality attributes are illustrated. The advantages of nondestructive quality evaluation techniques are that they are very fast, easy, labor- and time-intensive, and inexpensive. These techniques could also be useful to evaluate the quality of other vegetables.

Simulation and Emulation Tools for Fog Computing

2020 ◽  
Vol 13 ◽  
Author(s):  
Simar Preet Singh ◽  
Rajesh Kumar ◽  
Anju Sharma ◽  
S. Raji Reddy ◽  
Priyanka Vashisht
Keyword(s):  
Quality Of Service ◽  
Programming Languages ◽  
Traffic Management ◽  
Fog Computing ◽  
Research Work ◽  
Research Experience ◽  
Computing Paradigm ◽  
Quality Of Service Parameters ◽  
User Friendly

Background: Fog computing paradigm has recently emerged and gained higher attention in present era of Internet of Things. The growth of large number of devices all around, leads to the situation of flow of packets everywhere on the Internet. To overcome this situation and to provide computations at network edge, fog computing is the need of present time that enhances traffic management and avoids critical situations of jam, congestion etc. Methods: For research purposes, there are many methods to implement the scenarios of fog computing i.e. real-time implementation, implementation using emulators, implementation using simulators etc. The present study aims to describe the various simulation and emulation tools for implementing fog computing scenarios. Results: Review shows that iFogSim is the simulator that most of the researchers use in their research work. Among emulators, EmuFog is being used at higher pace than other available emulators. This might be due to ease of implementation and user-friendly nature of these tools and language these tools are based upon. The use of such tools enhance better research experience and leads to improved quality of service parameters (like bandwidth, network, security etc.). Conclusion: There are many fog computing simulators/emulators based on many different platforms that uses different programming languages. The paper concludes that the two main simulation and emulation tools in the area of fog computing are iFogSim and EmuFog. Accessibility of these simulation/emulation tools enhance better research experience and leads to improved quality of service parameters along with the ease of their usage.

CPVA: a web-based metabolomic tool for chromatographic peak visualization and annotation

2020 ◽  
Vol 36 (12) ◽  
pp. 3913-3915
Author(s):  
Hemi Luan ◽  
Xingen Jiang ◽  
Fenfen Ji ◽  
Zhangzhang Lan ◽  
Zongwei Cai ◽  
...  
Keyword(s):  
False Positive ◽  
Supplementary Information ◽  
Liquid Chromatography Mass Spectrometry ◽  
Targeted Metabolomics ◽  
Metabolomics Data ◽  
Web Based ◽  
Tremendous Amount ◽  
Chromatographic Peaks ◽  
User Friendly

Abstract Motivation Liquid chromatography–mass spectrometry-based non-targeted metabolomics is routinely performed to qualitatively and quantitatively analyze a tremendous amount of metabolite signals in complex biological samples. However, false-positive peaks in the datasets are commonly detected as metabolite signals by using many popular software, resulting in non-reliable measurement. Results To reduce false-positive calling, we developed an interactive web tool, termed CPVA, for visualization and accurate annotation of the detected peaks in non-targeted metabolomics data. We used a chromatogram-centric strategy to unfold the characteristics of chromatographic peaks through visualization of peak morphology metrics, with additional functions to annotate adducts, isotopes and contaminants. CPVA is a free, user-friendly tool to help users to identify peak background noises and contaminants, resulting in decrease of false-positive or redundant peak calling, thereby improving the data quality of non-targeted metabolomics studies. Availability and implementation The CPVA is freely available at http://cpva.eastus.cloudapp.azure.com. Source code and installation instructions are available on GitHub: https://github.com/13479776/cpva. Supplementary information Supplementary data are available at Bioinformatics online.

Temporally Continuous Evaluation of the Quality of Digitally Coded Sequences

1997 ◽  
Author(s):  
Nagato Narita ◽  
Yukio Sugiura ◽  
Ichiro Yuyama
Keyword(s):  
Continuous Evaluation

scholarly journals Quality of Cattle Meat and Its Compositional Constituents

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Umer Seid Geletu ◽  
Munera Ahmednur Usmael ◽  
Yesihak Yusuf Mummed ◽  
Abdulmuen Mohammed Ibrahim
Keyword(s):  
Fatty Acids ◽  
Meat Quality ◽  
Volatile Fatty Acids ◽  
Near Infrared ◽  
Water Solubility ◽  
Quality Attributes ◽  
Eating Quality ◽  
Human Consumption ◽  
Cattle Meat

Meat is the most valuable livestock product since it is one of the main sources of protein for human consumption. Meat quality can be evaluated according to the following parameters: pH, amount of lactic acid, volatile fatty acids, bounded water, solubility of proteins, color, and tenderness. The meat composition and physical properties of muscles have been characterized for ensuring improved eating quality. Thus, the purpose of this paper was to review the major chemical compositional and physicochemical properties of meat and, at the same time, its quality attributes and factors that affect quality of meat. A number of structural features of meat as connective tissue, muscle fibers, and tendon that attaches the muscle to the bone are visible in joint meat examined through naked eyes. Water is quantitatively the most important component of meat comprising up to 75% of weight. Meat is also composed of amino acids, fatty acids, vitamins, minerals, and other important ingredients. Quality factors perceived by consumers are related to sensory attributes (e.g., color, tenderness, and flavor), nutritional properties (e.g., calories, vitamins’ content, and fatty acids’ profile), and appearance (e.g., exudation, marbling, and visible amount of fat). However, fresh meat quality can be defined instrumentally including composition, nutrients, color, water-holding capacity, tenderness, functionality, flavors, spoilage, and contamination. Visual inspection based on sensory quality attributes and different chemical methods are used to analyze meat quality. Other methods such as computer vision and imaging spectroscopy, gas chromatographic analysis, near-infrared technology, dual-energy X-ray absorptiometry, and computerized tomography scanning are also used in the meat industry. So, the aim of the present review is to review quality characteristics of cattle meat and its composition constituents.

scholarly journals BUDGET UAV SYSTEMS FOR THE PROSPECTION OF SMALL- AND MEDIUM-SCALE ARCHAEOLOGICAL SITES

2016 ◽  
Vol XLI-B1 ◽  
pp. 971-977 ◽  
Author(s):  
W. Ostrowski ◽  
K. Hanus
Keyword(s):  
Low Cost ◽  
Planning System ◽  
Archaeological Sites ◽  
Quality Of Data ◽  
Computing Power ◽  
Medium Scale ◽  
The Cost ◽  
User Friendly ◽  
Operational Range

One of the popular uses of UAVs in photogrammetry is providing an archaeological documentation. A wide offer of low-cost (consumer) grade UAVs, as well as the popularity of user-friendly photogrammetric software allowing obtaining satisfying results, contribute to facilitating the process of preparing documentation for small archaeological sites. However, using solutions of this kind is much more problematic for larger areas. The limited possibilities of autonomous flight makes it significantly harder to obtain data for areas too large to be covered during a single mission. Moreover, sometimes the platforms used are not equipped with telemetry systems, which makes navigating and guaranteeing a similar quality of data during separate flights difficult. The simplest solution is using a better UAV, however the cost of devices of such type often exceeds the financial capabilities of archaeological expeditions. <br><br> The aim of this article is to present methodology allowing obtaining data for medium scale areas using only a basic UAV. The proposed methodology assumes using a simple multirotor, not equipped with any flight planning system or telemetry. Navigating of the platform is based solely on live-view images sent from the camera attached to the UAV. The presented survey was carried out using a simple GoPro camera which, from the perspective of photogrammetric use, was not the optimal configuration due to the fish eye geometry of the camera. Another limitation is the actual operational range of UAVs which in the case of cheaper systems, rarely exceeds 1 kilometre and is in fact often much smaller. Therefore the surveyed area must be divided into sub-blocks which correspond to the range of the drone. It is inconvenient since the blocks must overlap, so that they will later be merged during their processing. This increases the length of required flights as well as the computing power necessary to process a greater number of images. <br><br> These issues make prospection highly inconvenient, but not impossible. Our paper presents our experiences through two case studies: surveys conducted in Nepal under the aegis of UNESCO, and works carried out as a part of a Polish archaeological expedition in Cyprus, which both prove that the proposed methodology allows obtaining satisfying results. The article is an important voice in the ongoing debate between commercial and academic archaeologists who discuss the balance between the required standards of conducting archaeological works and economic capabilities of archaeological missions.

Sign in / Sign up

Export Citation Format

Share Document