Direct Torque Control of PMSM Based on Variable Parameter PI and Fuzzy Control

2011 ◽  
Vol 130-134 ◽  
pp. 2530-2534
Author(s):  
La Wu Zhou ◽  
Shu Qi Shi
Keyword(s):  
Permanent Magnet ◽  
Fuzzy Controller ◽  
Permanent Magnet Synchronous Motor ◽  
Direct Torque Control ◽  
Variable Parameter ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Torque Control ◽  
Static Performance ◽  
Stator Flux

This paper discusses that conventional direct torque control (DTC) system of permanent magnet synchronous motor (PMSM) exists in the stator flux linkage and electromagnetic torque ripple faults, and puts forward a method using variable parameter PI controller and fuzzy controller respectively used to replace PI speed regulator and hysteresis comparator of the conventional direct torque control and constructs a new direct torque control system of permanent magnet synchronous motor. The experiment results showed that the improved system has good dynamic and static performance, less flux and torque ripple．

Simulation Research of Direct Torque Control for Marine Permanent Magnet Synchronous Motor

2014 ◽  
Vol 1044-1045 ◽  
pp. 858-862
Author(s):  
Ke Yi Zhan ◽  
Hai Bo Gao ◽  
Fei Fei Chi
Keyword(s):  
Permanent Magnet ◽  
Electric Propulsion ◽  
Permanent Magnet Synchronous Motor ◽  
Direct Torque Control ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Torque Control ◽  
Permanent Magnet Synchronous Motors ◽  
Simulation Research ◽  
Stator Flux

The permanent magnet synchronous motors are more and more popular in marine electric propulsion field. Aiming to solve the problem of large torque ripple in traditional DTC system, this paper introduces the principle of space vector modulation and builds the electric propulsion system models based on direct torque control for permanent magnet synchronous motor in Simulink. Typical working condition experiments are designed to contrast the performances between traditional DTC and SVM-DTC. Simulation result proves that SVM-DTC can reduce ripples of both electromagnetic torque and stator flux effectively with the same dynamic response character as traditional DTC system.

Direct Torque Control Servo System for Permanent Magnet Synchronous Motor

2012 ◽  
Vol 241-244 ◽  
pp. 1370-1373
Author(s):  
Xiao Wei Tu ◽  
Ying Yang ◽  
Xing Chen ◽  
Zhi Xuan Yu
Keyword(s):  
Permanent Magnet ◽  
Permanent Magnet Synchronous Motor ◽  
Direct Torque Control ◽  
Servo System ◽  
Synchronous Motor ◽  
Torque Control ◽  
Experimental Results ◽  
Static Performance ◽  
Stator Flux

Permanent magnet synchronous motor (PMSM) servo system has been widely used in various fields. To improve its performance, the hardware and software of PMSM servo system based on the advance DSP of TMS302F28335 were designed in this paper. The principle of DTC for PMSM and stator flux estimator used LPF instead of pure integrator are introduced. The simulation and experimental results show that the designed servo system can achieve good dynamic, static performance and good robustness.

The Implementation of Permanent Magnet Synchronous Motor Direct Torque Control

2013 ◽  
Vol 712-715 ◽  
pp. 2757-2760
Author(s):  
Jun Li Zhang ◽  
Yu Ren Li ◽  
Long Fei Fu ◽  
Fan Gao
Keyword(s):  
Coordinate System ◽  
Permanent Magnet ◽  
Control Method ◽  
Block Diagram ◽  
Permanent Magnet Synchronous Motor ◽  
Direct Torque Control ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Torque Control ◽  
Two Phase

In order to deeply understand the characteristics of the permanent magnet synchronous motor direct torque control method, its mathematical models were established in the two-phase stationary coordinate system, the two-phase synchronous rotating coordinate system, and x-y stator synchronous rotating coordinate system. The implementation process of direct torque control method in varied stator winding connection was analyzed in detail. In order to improve the speed and torque performance of the permanent magnet synchronous motor, the direct torque control block diagram and the space voltage vector selection table were given. Finally, the summary and outlook of reducing torque ripple in the permanent magnet synchronous motor direct torque control methods.

scholarly journals Feedforward Neural Network-DTC of Multi-phase Permanent Magnet Synchronous Motor Using Five-Phase Neural Space Vector Pulse Width Modulation Strategy

2021 ◽  
Vol 54 (2) ◽  
pp. 345-354
Author(s):  
Fayçal Mehedi ◽  
Habib Benbouhenni ◽  
Lazhari Nezli ◽  
Djamel Boudana
Keyword(s):  
Permanent Magnet ◽  
Pulse Width ◽  
Pulse Width Modulation ◽  
Permanent Magnet Synchronous Motor ◽  
Direct Torque Control ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Torque Control ◽  
Space Vector ◽  
Stator Current

In this work, the direct torque control (DTC) is applied to the five-phase permanent magnet synchronous motor (FP-PMSM). The DTC method based on classical space vector pulse width modulation (SVPWM) is a common solution used to overcome traditional problems; such as stator flux ripple, electromagnetic torque ripple and gives more total harmonic distortion (THD) of the stator current. The actual paper is based on improving the performance of DTC-SVPWM by using the feedforward neural networks (FNNs) instead of the proportional-integral (PI) regulators and hysteresis comparators (HCs) of the conventional SVPWM strategy. This algorithm can solve the traditional PI regulators and HCs problems which are represented in responses dynamic and reduce the torque ripple, flux ripple, and the THD of stator current of FP-PMSM drives. The proposed strategy was tested in different tests with simulation using Matlab software.

Study on speed sensorless system of permanent magnet synchronous motor based on improved direct torque control

2021 ◽  
pp. 014233122110629
Author(s):  
Xiaoxin Hou ◽  
Mingqian Wang ◽  
Guodong You ◽  
Jinming Pan ◽  
Xiating Xu ◽  
...  
Keyword(s):  
Control System ◽  
Permanent Magnet ◽  
Permanent Magnet Synchronous Motor ◽  
Direct Torque Control ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Torque Control ◽  
Switching Frequency ◽  
Speed Sensorless ◽  
Stator Resistance

The traditional direct torque control system of permanent magnet synchronous motor has many problems, such as large torque ripple and variable switching frequency. In order to improve the dynamic and static performance of the control system, a new torque control idea and speed sensorless control scheme are proposed in this paper. First, by deriving the equation of torque change rate, an improved torque controller is designed to replace the torque hysteresis controller of the traditional direct torque control. The improved direct torque control strategy can significantly reduce the torque ripple and keep the switching frequency constant. Then, based on the improved direct torque control and considering the sensitivity of the stator resistance to temperature change, a speed estimator based on the model reference adaptive method is designed. This method realizes the stator resistance on-line identification and further improves the control precision of the system. The performance of the traditional direct torque control and the improved direct torque control are compared by simulation and experiment under different operating conditions. The simulation and experimental results are presented to support the validity and effectiveness of the proposed method.

scholarly journals A Novel Modified DTC-SVM Method with Better Overload-capability for Permanent Magnet Synchronous Motor Servo Drives

2017 ◽  
Vol 61 (3) ◽  
pp. 253 ◽  
Author(s):  
Tibor Vajsz ◽  
László Számel ◽  
György Rácz
Keyword(s):  
Permanent Magnet ◽  
Permanent Magnet Synchronous Motor ◽  
Direct Torque Control ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Motor Drives ◽  
Point Of View ◽  
Torque Control ◽  
Servo Drives ◽  
Vector Modulation

Direct torque control with space vector modulation (DTC-SVM) is one of the most promising alternatives of field-oriented control in the case of permanent magnet synchronous motor drives. This method controls the electromagnetic torque of the motor with excellent dynamics which makes it an attractive choice in the case of servo drives. In this article DTC-SVM is investigated with Matlab-Simulink simulation and it is proven that DTC-SVM has severe instability-issues during overloading and its overload-capabilities are heavily dependent on the speed. Therefore, a novel modified DTC-SVM method is proposed which is stable during overloading and its overload-capabilities are practically independent of the speed. Also, the overload-capability of the new method is superior to that of classical DTC-SVM, while the two methods are practically identical from the point of view of the torque-control dynamics and the torque-ripple generated.

scholarly journals Direct Torque Control of Dual Three-Phase Permanent Magnet Synchronous Motor

2021 ◽  
Vol 297 ◽  
pp. 01017
Author(s):  
Fouad Labchir ◽  
Mhammed Hasoun ◽  
Aziz El Afia ◽  
Karim Benkirane ◽  
Mohamed Khafallah
Keyword(s):  
Permanent Magnet ◽  
Permanent Magnet Synchronous Motor ◽  
Direct Torque Control ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Torque Control ◽  
Stator Windings ◽  
Torque Control Strategy ◽  
Three Phase ◽  
Low Torque

In this paper a direct torque control strategy for dual three-phase permanent magnet synchronous motor (DTP-PMSM) is presented, the machine has two sets of three-phase stator windings spatially phase shifted by 30 electric degrees. In order to reduce the stator harmonic current, torque and flux are controlled based on regulators and Vector Space Decomposition technique. The proposed approach has the benefits of low stator current distortion and low torque ripple. The validity and the efficiency of the selected technique are confirmed by simulation results.

Sign in / Sign up

Export Citation Format

Share Document