KW Level Wind Turbine Wind Tracking and Yaw System

2011 ◽  
Vol 148-149 ◽  
pp. 97-100
Author(s):  
Xu Gang Wang ◽  
Guang Qi Cao ◽  
Zhi Guang Guan ◽  
Zu Yu Zhao

Wind power is an important direction of new energy, which has no pollution, no consuming fossil fuels, and no producing waste, which is widely used at this stage of clean energy. The small stand alone wind power has been paid more and more attention due to its low cost, flexible installation, strong adaptability. This paper introduces the mechanical and electrical structure, which are used in KW level stand alone mode wind turbine automatically track and yaw system. The motion rules and control strategies of the tracking and yaw system are discussed and then the control program flow is provided. The PIC16F873 chip is used as controller for this part in this system. It can fully meet the design requirements, which will reduce costs and increase the system's control ability. This system can automatically track and yaw, according to the wind direction and wind power.

The aim of this chapter is to present an overview of the state of technology and discuss some technology tendency in the Power Electronics (PE) used for Wind Power Applications (WPA). Firstly, technological and commercial developments in wind power generation are generally discussed. Next, the wind turbine concept is illustrated and explained using different types of generator. The control structure of wind-turbines (WTs) is explained using DFIG, Asynchronous and Synchronous Generator (ASG and SG). Finally, the last section focuses on a detailed literature review describing DFIG based wind turbine-generator systems in terms of modeling and control strategies.


2012 ◽  
Vol 433-440 ◽  
pp. 7218-7222 ◽  
Author(s):  
Tahir Yavuza ◽  
Birol Kilkis ◽  
Emre Koc ◽  
Ozgur Erol

While our planet is rapidly approaching an environmental crisis under the dominant use of depleting fossil fuels, the need for exploiting all forms of new, small carbon foot-print, renewable, and clean energy resources are increasing in the same proportion. Therefore, the need for exploring all types of clean energy resources that the world has- some of which might have not attracted sufficient attention before- is essential in order to implement sufficient, efficient, and widely use all them. In this respect, operational effectiveness of the wind and hydrokinetic turbines depend on the performance of the airfoils chosen. Using double-blade airfoils in the wind and hydrokinetic turbines, minimum wind and hydrokinetic flow velocities to produce meaningful and practical mechanical power reduces to 3- 4 m /s for wind turbines and 1-1.5 m/s or less for hydrokinetic turbines. Consequently, double-blade hydrofoils may re-define the potentials of wind power and hydrokinetic power of the countries in positive manner.


Author(s):  
G Zheng ◽  
H Xu ◽  
X Wang ◽  
J Zou

This paper studies the operation of wind turbines in terms of three phases: start-up phase, power-generation phase, and shutdown phase. Relationships between the operational phase and control rules for the speed of rotation are derived for each of these phases. Taking into account the characteristics of the control strategies in the different operational phases, a global control strategy is designed to ensure the stable operation of the wind turbine in all phases. The results of simulations are presented that indicate that the proposed algorithm can control the individual phases when considered in isolation and also when they are considered in combination. Thus, a global control strategy for a wind turbine that is based on a single algorithm is presented which could have significant implications on the control and use of wind turbines.


Author(s):  
Kathleen Araújo

The discovery of oil in Pennsylvania in 1859 was a relatively inconspicuous precursor to what would become an epic shift into the modern age of energy. At the time, the search for “rock oil” was driven by a perception that lighting fuel was running out. Advances in petrochemical refining and internal combustion engines had yet to occur, and oil was more expensive than coal. In less than 100 years, oil gained worldwide prominence as an energy source and traded commodity. Along similar lines, electricity in the early 1900s powered less than 10% of the homes in the United States. Yet, in under a half a century, billions of homes around the world were equipped to utilize the refined form of energy. Estimates indicate that roughly 85% of the world’s population had access to electricity in 2014 (World Bank, n.d.b). For both petroleum and electricity, significant changes in energy use and associated technologies were closely linked to evolutions in infrastructure, institutions, investment, and practices. Today, countless decision-makers are focusing on transforming energy systems from fossil fuels to low carbon energy which is widely deemed to be a cleaner, more sustainable form of energy. As of 2016, 176 countries have renewable energy targets in place, compared to 43 in 2005 (Renewable Energy Policy Network for the 21st Century [REN21], 2017). Many jurisdictions are also setting increasingly ambitious targets for 100% renewable energy or electricity (Bloomberg New Energy Finance [BNEF], 2016). In 2015, the G7 and G20 committed to accelerate the provision of access to renewables and efficiency (REN21, 2016). In conjunction with all of the above priorities, clean energy investment surged in 2015 to a new record of $329 billion, despite low, fossil fuel prices. A significant “decoupling” of economic and carbon dioxide (CO2) growth was also evident, due in part to China’s increased use of renewable energy and efforts by member countries of the Organization for Economic Cooperation and Development (OECD) to foster greater use of renewables and efficiency (REN21, 2016).


2019 ◽  
Vol 11 (5) ◽  
Author(s):  
Nagamanikandan Govindan ◽  
Asokan Thondiyath

Abstract This paper presents the design, analysis, and testing of a novel multimodal grasper having the capabilities of shape conformation, within-hand manipulation, and a built-in compact mechanism to vary the forces at the contact surface. The proposed grasper has two important qualities: versatility and less complexity. The former refers to the ability to grasp a range of objects having different geometrical shape, size, and payload and perform in-hand manipulations such as rolling and sliding, and the latter refers to the uncomplicated design, and ease of planning and control strategies. Increasing the number of functions performed by the grasper to adapt to a variety of tasks in structured and unstructured environments without increasing the mechanical complexity is the main interest of this research. The proposed grasper consists of two hybrid jaws having a rigid inner structure encompassed by a flexible, active gripping surface. The flexibility of the active surface has been exploited to achieve shape conformation, and the same has been utilized with a compact mechanism, introduced in the jaws, to vary the contact forces while grasping and manipulating an object. Simple and scalable structure, compactness, low cost, and simple control scheme are the main features of the proposed design. Detailed kinematic and static analysis are presented to show the capability of the grasper to adjust and estimate the contact forces without using a force sensor. Experiments are conducted on the fabricated prototype to validate the different modes of operation and to evaluate the advantages of the proposed concept.


Proceedings ◽  
2019 ◽  
Vol 42 (1) ◽  
pp. 35
Author(s):  
Gemírson de Paula dos Reis ◽  
Saulo Neves Matos ◽  
Alan Kardek Rêgo Segundo ◽  
Elisângela Martins Leal ◽  
Robson Lage Figueiredo

Humanity’s growing long-term energy demand will be the opportunity for new energy generation sources. In this scenario, the use of hydrogen as an energy source has become an interesting alternative to energy production, as the use of fossil fuels can lead to harmful consequences, such as the emission of greenhouse gases. This paper presents the development of a low-cost instrumentation system for monitoring the temperature, current, voltage, and gas flow rate of a dry electrolytic cell. Through the electrolysis process, the cell generates a hydrogen-rich gas which is used as an additive in an internal combustion engine to reduce pollutant gas emissions and primary fuel consumption. The measured variables are presented as a function of the time to analyze the behavior of the electrolyzer. The main advance reported in this work is related to the use of a low-cost sensor for a hydrogen-rich gas flow measurement, in which calibration was performed indirectly using a rotameter as a reference. The calibration curve adjusted to the experimental data by linear regression presented a coefficient of determination of 0.9957. Thus, the use of the low-cost sensor is a feasible alternative for measuring the electrolysis gas generated by the cell.


2013 ◽  
Vol 313-314 ◽  
pp. 817-820
Author(s):  
Yue Hua Huang ◽  
Guang Xu Li ◽  
Huan Huan Li

This paper establishes the wind power system simulation model in Simulink/ Matlab environment. By adjusting the speed of variable speed wind turbine, the simulation model can keep running at the best operation condition, and then achieve maximum power transfer. In this process, this paper use PI controller to track and control the speed of wind turbine. Simulation results show that selecting the appropriate PI parameters can effectively track the speed and increase the efficiency of wind power generation system.


2012 ◽  
Vol 616-618 ◽  
pp. 1128-1132
Author(s):  
Yong Cun Guo ◽  
Gang Cheng ◽  
Kun Hu ◽  
Peng Yu Wang

As human overexploitation of non-renewable fossil fuels such as mining resources, the global environment has been severely polluted and damaged, which also poses a threat to human's health. So it is full of demands for renewable and clean energy sources. At present R & D of new energy is also increasing emphasised around the world. HDR as a renewable clean geothermal resources, with large reserves, widely distributed, heat, environmentally friendly development, through the heat exchange technology for power generation, which has a strong potential value.To actively develop new energy and promote the application of HDR power generation technology,we start from the basic characteristics of the HDR, and explore the basic principles of HDR power generation, the key technologies and the development of economic conditions. Meanwhile combined with the geographical characteristics of the environment in China, from the perspective of integration of subject resources,finally we constructively put forward a three-stage strategy for HDR power generation development plan.


Author(s):  
Guan-Shong Hwang ◽  
Bor-Jeng Lin ◽  
Jao-Hwa Kuang ◽  
Wei-Hsiang Liao ◽  
Jau-Woei Perng ◽  
...  

The conversion of wind energy into a useful form of electrical power is rapidly and widely becoming popular as an alternative to the usage of fossil fuels. To improve the quality and reliability of a wind turbine, the issue of gear train technology has long been investigated in the continuing development of wind power industry. In this paper, an innovative, independently controllable gear drive that can be used to provide steady output speeds is proposed. With a prototype of this proposed transmission, kinematic/dynamic properties as well as power flow are verified to demonstrate feasibility of this gear system.


Sign in / Sign up

Export Citation Format

Share Document