Mechanical Simulation of Reinforced Concrete Frame Structure

2012 ◽  
Vol 256-259 ◽  
pp. 689-692
Author(s):  
Hui Na Jia ◽  
Gao Wei Yue
Keyword(s):  
Reinforced Concrete ◽  
Constant Load ◽  
Frame Structure ◽  
Reinforced Concrete Frame ◽  
Element Analysis ◽  
Concrete Frame ◽  
The Finite Element Analysis ◽  
Reinforced Concrete Frame Structure ◽  
Calculation Results ◽  
Stress And Deformation

In this paper the theoretical model of reinforced concrete frame structure is established to numerically simulate and analyze its overall morphology with the finite element analysis method. The calculation results shows that at the bottom of the structure the stress and deformation is much larger than other parts with the action of constant load, live load and wind load. And with modal analysis and buckling analysis natural frequency and vibration mode are obtained to avoid resonance and predict the buckling load.

Research on the Nonlinearity Finite Element in the Super-Long Reinforced Concrete Frame Structure

2014 ◽  
Vol 1065-1069 ◽  
pp. 1226-1229
Author(s):  
Yong Sheng Zhang ◽  
Yan Ying Li
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Internal Force ◽  
Frame Structure ◽  
Reinforced Concrete Frame ◽  
Engineering Project ◽  
Element Analysis ◽  
Concrete Frame ◽  
Temperature Load ◽  
Reinforced Concrete Frame Structure

Basing on the finite element analysis software, the emergence of crack under the effect of gradual changed temperature load and the change of stress which are in the condition of super reinforced concrete frame structure are analyzed from the linear and nonlinear numeral simulation. The simulation shows that the structure component under the normal condition is cracked and turn into the nonlinear condition and the steel bars still works under the elastic stage. Meanwhile the actual stage which is reflected by the elastic-plastic analysis of the internal force and deformation is compared by the results which are obtained by the actual project observed results and the calculation of the simplified model. So the distribution of the stress which is caused by the structure temperature reduction is greatly evaluated by the usage of the cracking model which is nonlinear finite element and also plays an important role in the engineering project and practice.

Finite Element Analysis on Exterior Joint of Reinforced Concrete Frame Structure

2012 ◽  
Vol 166-169 ◽  
pp. 172-175
Author(s):  
Chun Ming Wei ◽  
De Long Shao ◽  
Hui Su ◽  
Qiang Zhao
Keyword(s):  
Numerical Simulation ◽  
Reinforced Concrete ◽  
Seismic Behavior ◽  
Ultimate Load ◽  
Frame Structure ◽  
Reinforced Concrete Frame ◽  
Element Analysis ◽  
Concrete Frame ◽  
Construction Joint ◽  
Reinforced Concrete Frame Structure

To investigate the effect of the horizontal construction joint on seismic behavior of the exterior joint of the reinforced concrete frame structure, the numerical simulation of the exterior joint with the construction joint under the low cyclic loading was done. The experimental results and the numerical simulation values were compared. Seen from the ultimate load, the experiment value is 158.7kN, the simulation value is 170kN, the relative error is about 11%.Further analysis of the exterior joint of reinforced concrete frame skeleton properties, the feasibility of applying unit construction joints is verified.

Study on the Seismic Performance of the Braced Controlled Rocking Reinforced Concrete Frame Structure System

2014 ◽  
Vol 1065-1069 ◽  
pp. 1254-1259
Author(s):  
Pei Li ◽  
Jian Xin Liu
Keyword(s):  
Reinforced Concrete ◽  
Frame Structure ◽  
Concept Design ◽  
Shearing Force ◽  
Reinforced Concrete Frame ◽  
Element Analysis ◽  
Structure System ◽  
Concrete Frame ◽  
Reinforced Concrete Frame Structure ◽  
Different Levels

On the basis of structural concept design, this paper puts forward a new braced controlled rocking reinforced concrete frame structure system, researching dynamic characteristics of the BCR-RCF structure when the joints is been weakened in different levels by using finite element analysis software Abaqus, analyzing the reasonable degree of rocking joints stiffness weakening. By comparing the dynamic response of conventional reinforced concrete frame and the BCR-RCF structure, it shows that the BCR-RCF structure can effectively reduce the structural shearing force and acceleration response, however, displacement and velocity response is bigger than RCF structure. Compared with the RCF structure, shearing force and displacement responses of the BCR-RCF are more evenly distributed along the floor, which helps preventing excessive concentration of interlaminar deformation, so that materials of every layer can be fully utilized. After adding metal damper into the BCR-RCF structure, the displacement response can be effectively controlled.

Base-Isolated Multi-Storey Reinforced Concrete Frame Structure Modal Analysis

2012 ◽  
Vol 204-208 ◽  
pp. 869-871
Author(s):  
Cai Hua Wang ◽  
Hui Jian Li ◽  
Jian Feng Wu
Keyword(s):  
Reinforced Concrete ◽  
Modal Analysis ◽  
Seismic Isolation ◽  
Base Isolation ◽  
Frame Structure ◽  
Reinforced Concrete Frame ◽  
Concrete Frame ◽  
Reinforced Concrete Frame Structure ◽  
Before And After ◽  
Isolation Device

The multi-storey reinforced concrete frame structure used lead rubber pad as the base isolation device. The paper had modal analysis of base-isolated multi-storey reinforced concrete frame structure using the ANSYS software. Comparing the frequency and vibration mode before and after isolation under El-Centro wave, It concluded the leader rubber pad have seismic isolation effect for multi-storey reinforced concrete frame structure .

Sign in / Sign up

Export Citation Format

Share Document