On the Relation between Two Constitutive Models Frequently Adopted in Viscoplasticity

2012 ◽  
Vol 256-259 ◽  
pp. 995-1003 ◽  
Author(s):  
Fabio de Angelis
Keyword(s):  
Constitutive Model ◽  
Convex Analysis ◽  
Constitutive Models ◽  
Unified Framework ◽  
Subdifferential Calculus

The constitutive models of plasticity and viscoplasticity are formulated in a unified framework by taking advantage of the appropriate mathematical tools of convex analysis and subdifferential calculus. Two viscoplastic constitutive models frequently adopted in viscoplasticity are analyzed, the Duvaut and Lions viscoplastic constitutive model and the Perzyna viscoplastic constitutive model. In literature these two models are frequently adopted as alternatives. In the present paper it is discussed on the relation between the two models and it is shown that, under certain conditions and assumptions, the Duvaut-Lions model may be considered as derived from the Perzyna model.

scholarly journals Calibration of Finn Model and UBCSAND Model for Simplified Liquefaction Analysis Procedures

2021 ◽  
Vol 11 (11) ◽  
pp. 5283
Author(s):  
Jui-Ching Chou ◽  
Hsueh-Tusng Yang ◽  
Der-Guey Lin
Keyword(s):  
Numerical Simulation ◽  
Constitutive Model ◽  
Structural Damage ◽  
Simulation Analysis ◽  
Constitutive Models ◽  
Soil Liquefaction ◽  
Analysis Procedure ◽  
Liquefaction Resistance ◽  
Simplified Procedure ◽  
Liquefaction Analysis

Soil-liquefaction-related hazards can damage structures or lead to an extensive loss of life and property. Therefore, the stability and safety of structures against soil liquefaction are essential for evaluation in earthquake design. In practice, the simplified liquefaction analysis procedure associated with numerical simulation analysis is the most used approach for evaluating the behavior of structures or the effectiveness of mitigation plans. First, the occurrence of soil liquefaction is evaluated using the simplified procedure. If soil liquefaction occurs, the resulting structural damage or the following mitigation plan is evaluated using the numerical simulation analysis. Rational and comparable evaluation results between the simplified liquefaction analysis procedure and the numerical simulation analysis are achieved by ensuring that the liquefaction constitutive model used in the numerical simulation has a consistent liquefaction resistance with the simplified liquefaction analysis procedure. In this study, two frequently used liquefaction constitutive models (Finn model and UBCSAND model) were calibrated by fitting the liquefaction triggering curves of most used simplified liquefaction analysis procedures (NCEER, HBF, JRA96, and T-Y procedures) in Taiwan via FLAC program. In addition, the responses of two calibrated models were compared and discussed to provide guidelines for selecting an appropriate liquefaction constitutive model in future projects.

Constitutive Modeling for Flow Stress Behavior of Nimonic 80A Superalloy During Hot Deformation Process

2016 ◽  
Vol 35 (3) ◽  
pp. 327-336 ◽  
Author(s):  
Sendong Gu ◽  
Liwen Zhang ◽  
Chi Zhang ◽  
Wenfei Shen
Keyword(s):  
Flow Stress ◽  
Constitutive Model ◽  
Hot Deformation ◽  
Critical Strain ◽  
Volume Fraction ◽  
Constitutive Models ◽  
Avrami Equation ◽  
Peak Strain ◽  
Compression Tests ◽  
Nimonic 80A

AbstractThe hot deformation characteristics of nickel-based alloy Nimonic 80A were investigated by isothermal compression tests conducted in the temperature range of 1,000–1,200°C and the strain rate range of 0.01—5 s–1on a Gleeble-1500 thermomechanical simulator. In order to establish the constitutive models for dynamic recrystallization (DRX) behavior and flow stress of Nimonic 80A, the material constantsα,nand DRX activation energyQin the constitutive models were calculated by the regression analysis of the experimental data. The dependences of initial stress, saturation stress, steady-state stress, dynamic recovery (DRV) parameter, peak strain, critical strain and DRX grain size on deformation parameters were obtained. Then, the Avrami equation including the critical strain for DRX and the peak strain as a function of strain was established to describe the DRX volume fraction. Finally, the constitutive model for flow stress of Nimonic 80A was developed in DRV region and DRX region, respectively. The flow stress values predicted by the constitutive model are in good agreement with the experimental ones, which indicates that the constitutive model can give an accurate estimate for the flow stress of Nimonic 80A under the deformation conditions.

scholarly journals Simultaneous Characterization of Relaxation, Creep, Dissipation, and Hysteresis by Fractional-Order Constitutive Models

2021 ◽  
Vol 5 (2) ◽  
pp. 36
Author(s):  
Jun-Sheng Duan ◽  
Di-Chen Hu ◽  
Yang-Quan Chen
Keyword(s):  
Constitutive Model ◽  
Storage Modulus ◽  
Loss Factor ◽  
Creep Compliance ◽  
Loss Modulus ◽  
Constitutive Models ◽  
Stationary Points ◽  
Logarithmic Scale ◽  
Zener Model ◽  
Fractional Zener Model

We considered relaxation, creep, dissipation, and hysteresis resulting from a six-parameter fractional constitutive model and its particular cases. The storage modulus, loss modulus, and loss factor, as well as their characteristics based on the thermodynamic requirements, were investigated. It was proved that for the fractional Maxwell model, the storage modulus increases monotonically, while the loss modulus has symmetrical peaks for its curve against the logarithmic scale log(ω), and for the fractional Zener model, the storage modulus monotonically increases while the loss modulus and the loss factor have symmetrical peaks for their curves against the logarithmic scale log(ω). The peak values and corresponding stationary points were analytically given. The relaxation modulus and the creep compliance for the six-parameter fractional constitutive model were given in terms of the Mittag–Leffler functions. Finally, the stress–strain hysteresis loops were simulated by making use of the derived creep compliance for the fractional Zener model. These results show that the fractional constitutive models could characterize the relaxation, creep, dissipation, and hysteresis phenomena of viscoelastic bodies, and fractional orders α and β could be used to model real-world physical properties well.

A Generalized Elasto-Plastic Micro-Polar Constitutive Model

2015 ◽  
Vol 798 ◽  
pp. 505-509 ◽  
Author(s):  
Lapo Gori ◽  
Roque Luiz da Silva Pitangueira ◽  
Samuel Silva Penna ◽  
Jamile Salim Fuina
Keyword(s):  
Structural Analysis ◽  
Constitutive Model ◽  
Numerical Method ◽  
Strain Localization ◽  
Continuum Model ◽  
Constitutive Models ◽  
Localization Problem ◽  
Polar Model ◽  
Basic Characteristics ◽  
Analysis Environment

This paper summarizes the implementation of an elasto-plastic constitutive model for a micro-polar continuum in the constitutive models framework of the software INSANE (INteractive Structural ANalysis Environment). Such an implementation is based on the tensorial format of a unified constitutive models formulation, that allows to implement different constitutive models independently on the peculiar numerical method adopted for the solution of the problem. The basic characteristics of the micro-polar continuum model and of the unified formulation of constitutive models are briefly recalled. A generalization of the micro-polar model is then introduced in order to include this model in the existent tensor-based formulation. Finally, an enhanced version of the general closest-point algorithm, ables to manage the generalized micro-polar formulation, is derived. A strain localization problem modeling illustrates the implementation.

scholarly journals Microplane Constitutive Model and Metal Plasticity

2000 ◽  
Vol 53 (10) ◽  
pp. 265-281 ◽  
Author(s):  
Michele Brocca ◽  
Zdeneˇk P. Bazˇant
Keyword(s):  
Constitutive Model ◽  
Plastic Region ◽  
Constitutive Models ◽  
Flow Theory ◽  
Basic Structure ◽  
Steel Tube ◽  
Loading Path ◽  
Microplane Model ◽  
Metal Plasticity ◽  
Path Direction

The microplane model is a versatile constitutive model in which the stress-strain relations are defined in terms of vectors rather than tensors on planes of all possible orientations, called the microplanes, representative of the microstructure of the material. The microplane model with kinematic constraint has been successfully employed in the modeling of concrete, soils, ice, rocks, fiber composites and other quasibrittle materials. The microplane model provides a powerful and efficient numerical tool for the development and implementation of constitutive models for any kind of material. The paper presents a review of the background from which the microplane model stems, highlighting differences and similarities with other approaches. The basic structure of the microplane model is then presented, together with its extension to finite strain deformation. Three microplane models for metal plasticity are introduced and discussed. They are compared mutually and with the classical J2-flow theory for incremental plasticity by means of two examples. The first is the material response to a nonproportional loading path given by uniaxial compression into the plastic region followed by shear (typical of buckling and bifurcation problems). This example is considered in order to show the capability of the microplane model to represent a vertex on the yield surface. The second example is the ‘tube-squash’ test of a highly ductile steel tube: a finite element computation is run using two microplane models and the J2-flow theory. One of the microplane models appears to predict more accurately the final shape of the deformed tube, showing an improvement compared to the J2-flow theory even when the material is not subjected to abrupt changes in the loading path direction. This review article includes 114 references.

scholarly journals Constitutive Model for Concrete: An Overview

2015 ◽  
Vol 10 (Special-Issue1) ◽  
pp. 782-788 ◽  
Author(s):  
Mehdi Shekarbeigi ◽  
Hasan Sharafi
Keyword(s):  
Constitutive Model ◽  
Damage Mechanics ◽  
Constitutive Models ◽  
Continuum Damage Mechanics ◽  
Constitutive Modelling ◽  
Continuum Damage ◽  
Endochronic Theory ◽  
Small Deformations

In the last three decades, the constitutive modelling of concrete evolved considerably. This paper describes various developments in this field based on different approaches such anelasticity, plasticity, continuum damage mechanics, plastic fracturing, endochronic theory, microplane models, etc. In this article the material is assumed to undergo small deformations. Only time independent constitutive models and the issues related to their implementation are discussed

scholarly journals Identification of orthotropic material parameters for acute, necrotic, fibrotic and remodelling myocardial infarcts in the rat

2019 ◽  
Author(s):  
Mazin S. Sirry ◽  
Laura Dubuis ◽  
Neil H. Davies ◽  
Jun Liao ◽  
Thomas Franz
Keyword(s):  
Constitutive Model ◽  
Orthotropic Material ◽  
Constitutive Models ◽  
Biaxial Stress ◽  
Percentage Error ◽  
Fe Model ◽  
Stress Strain ◽  
Material Parameters ◽  
Strain Data ◽  
Tensile Experiment

AbstractFinite element (FE) models have been effectively utilized in studying biomechanical aspects of myocardial infarction (MI). Although the rat is a widely used animal model for MI, there is a lack of material parameters based on anisotropic constitutive models for rat myocardial infarcts in literature. This study aimed at employing inverse methods to identify the parameters of an orthotropic constitutive model for myocardial infarcts in the acute, necrotic, fibrotic and remodelling phases utilizing the biaxial mechanical data developed in a previous study. FE model was developed mimicking the setup of the biaxial tensile experiment. The orthotropic case of the generalized Fung constitutive model was utilized to model the material properties of the infarct. The parameters of Fung model were optimized so that the FE solution best fitted the biaxial experimental stress-strain data. A genetic algorithm was used to minimize the objective function. Fung orthotropic material parameters for different infarct stages were identified. The FE model predictions best approximated the experimental data of the 28 days infarct stage with 3.0% mean absolute percentage error. The worst approximation was for the 7 days stage with 3.6% error. This study demonstrated that the experimental biaxial stress-strain data of healing rat infarcts could be successfully approximated using inverse FE methods and genetic algorithms. The material parameters identified in this study will provide an essential platform for FE investigations of biomechanical aspects of MI and the development of therapies.

Experimental and Numerical Study of Soft Tissue Surrogate Behavior Under Ballistic Loading

2012 ◽  
Author(s):  
Ericka K. Amborn ◽  
Karim H. Muci-Küchler ◽  
Brandon J. Hinz
Keyword(s):  
Soft Tissue ◽  
Constitutive Model ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Numerical Study ◽  
Constitutive Models ◽  
Material Behavior ◽  
Good Representation

Studying the high strain rate behavior of soft tissues and soft tissue surrogates is of interest to improve the understanding of injury mechanisms during blast and impact events. Tests such as the split Hopkinson pressure bar have been successfully used to characterize material behavior at high strain rates under simple loading conditions. However, experiments involving more complex stress states are needed for the validation of constitutive models and numerical simulation techniques for fast transient events. In particular, for the case of ballistic injuries, controlled tests that can better reflect the effects induced by a penetrating projectile are of interest. This paper presents an experiment that tries to achieve that goal. The experimental setup involves a cylindrical test sample made of a translucent soft tissue surrogate that has a small pre-made cylindrical channel along its axis. A small caliber projectile is fired through the pre-made channel at representative speeds using an air rifle. High speed video is used in conjunction with specialized software to generate data for model validation. A Lagrangian Finite Element Method (FEM) model was prepared in ABAQUS/Explicit to simulate the experiments. Different hyperelastic constitutive models were explored to represent the behavior of the soft tissue surrogate and the required material properties were obtained from high strain rate test data reported in the open literature. The simulation results corresponding to each constitutive model considered were qualitatively compared against the experimental data for a single projectile speed. The constitutive model that provided the closest match was then used to perform an additional simulation at a different projectile velocity and quantitative comparisons between numerical and experimental results were made. The comparisons showed that the Marlow hyperelastic model available in ABAQUS/Explicit was able to produce a good representation of the soft tissue surrogate behavior observed experimentally at the two projectile speeds considered.

Analysis of gas flow over a cylinder at all Knudsen numbers based on non-newtonian constitutive models

2020 ◽  
Vol 34 (14n16) ◽  
pp. 2040076
Author(s):  
Zhen-Yu Yuan ◽  
Zhong-Zheng Jiang ◽  
Wen-Wen Zhao ◽  
Wei-Fang Chen
Keyword(s):  
Constitutive Model ◽  
Gas Flow ◽  
Constitutive Relations ◽  
Constitutive Models ◽  
Direct Simulation Monte Carlo ◽  
Navier Stokes ◽  
Dsmc Simulation ◽  
Nonequilibrium Flows ◽  
Simulation Results ◽  
Better Than

This paper is focused on the gas properties over a cylinder from continuum to rarefied regimes based on the non-Newtonian constitutive model. This new constitutive model is first derived from Eu’s nonequilibrium ensemble method, which is intended for accurate description of nonequilibrium flows. Some assumptions and simplifications are made during the establishing progress of the new constitutive model by both Eu and Myong. To verify its accuracy, temperature contours and skin frictions around the cylinder are simulated by this new model. The inflow Mach number is equal to 10 and the Knudsen number ranges from 0.002 to 0.05. All simulation results are compared with Navier–Stokes (NS) and the direct simulation Monte Carlo (DSMC) methods in detail. The comparisons of friction around the surface show that the non-Newtonian constitutive models are better than the linear constitutive relations of NS equations for the prediction of nonequilibrium flow and much more close to DSMC simulation results.

Sign in / Sign up

Export Citation Format

Share Document