Effective Viscosity of Chlorella Sp. USTB-01 Suspension for Biofuel Production

2013 ◽  
Vol 291-294 ◽  
pp. 316-319
Author(s):  
Ai Hui Chou ◽  
Liang Chen ◽  
Xin Ru Zhang ◽  
Ze Yi Jiang ◽  
Fang He

Rheological properties of microalgae suspensions affect the mixing and mass transport in photobioreactor systems and the design of downstream biomass processing technologies,and directly impact the energy demand and system performance of algae biofuel production. The purpose of this paper is to obtain the rheological properties as a function of volume fraction. The volume fractions of microalgae suspensions φ were derived according to the size distribution of the microalgae cells and cell number concentrations per cubic meter liquid. We found that at low concentrations, microalgae suspensions display a Newtonian fluid behavior. At high concentrations, microalgae suspensions behave as a shear thinning non-Newtonian fluid. The results are of potential scientific relevance and also useful in relation to the design of algae bioprocessing for the large scale production of economic biofuels.

Author(s):  
Thomas Jenkins ◽  
Aurélie Bovi ◽  
Robert Edwards

Depletion of oil reserves and the associated effects on climate change have prompted a re-examination of the use of plant biomass as a sustainable source of organic carbon for the large-scale production of chemicals and materials. While initial emphasis has been placed on biofuel production from edible plant sugars, the drive to reduce the competition between crop usage for food and non-food applications has prompted massive research efforts to access the less digestible saccharides in cell walls (lignocellulosics). This in turn has prompted an examination of the use of other plant-derived metabolites for the production of chemicals spanning the high-value speciality sectors through to platform intermediates required for bulk production. The associated science of biorefining, whereby all plant biomass can be used efficiently to derive such chemicals, is now rapidly developing around the world. However, it is clear that the heterogeneity and distribution of organic carbon between valuable products and waste streams are suboptimal. As an alternative, we now propose the use of synthetic biology approaches to ‘re-construct’ plant feedstocks for optimal processing of biomass for non-food applications. Promising themes identified include re-engineering polysaccharides, deriving artificial organelles, and the reprogramming of plant signalling and secondary metabolism.


2019 ◽  
Vol 18 (1) ◽  
Author(s):  
Hossein Alishah Aratboni ◽  
Nahid Rafiei ◽  
Raul Garcia-Granados ◽  
Abbas Alemzadeh ◽  
José Rubén Morones-Ramírez

Abstract The use of fossil fuels has been strongly related to critical problems currently affecting society, such as: global warming, global greenhouse effects and pollution. These problems have affected the homeostasis of living organisms worldwide at an alarming rate. Due to this, it is imperative to look for alternatives to the use of fossil fuels and one of the relevant substitutes are biofuels. There are different types of biofuels (categories and generations) that have been previously explored, but recently, the use of microalgae has been strongly considered for the production of biofuels since they present a series of advantages over other biofuel production sources: (a) they don’t need arable land to grow and therefore do not compete with food crops (like biofuels produced from corn, sugar cane and other plants) and; (b) they exhibit rapid biomass production containing high oil contents, at least 15 to 20 times higher than land based oleaginous crops. Hence, these unicellular photosynthetic microorganisms have received great attention from researches to use them in the large-scale production of biofuels. However, one disadvantage of using microalgae is the high economic cost due to the low-yields of lipid content in the microalgae biomass. Thus, development of different methods to enhance microalgae biomass, as well as lipid content in the microalgae cells, would lead to the development of a sustainable low-cost process to produce biofuels. Within the last 10 years, many studies have reported different methods and strategies to induce lipid production to obtain higher lipid accumulation in the biomass of microalgae cells; however, there is not a comprehensive review in the literature that highlights, compares and discusses these strategies. Here, we review these strategies which include modulating light intensity in cultures, controlling and varying CO2 levels and temperature, inducing nutrient starvation in the culture, the implementation of stress by incorporating heavy metal or inducing a high salinity condition, and the use of metabolic and genetic engineering techniques coupled with nanotechnology.


Author(s):  
BB Marvey

Large fluctuations in crude oil prices and the diminishing oil supply have left economies vulnerable to energy shortages thus placing an enormous pressure on nations around the world to seriously consider alternative renewable resources as feedstock in biofuel applications. Apart from energy security reasons, biofuels offer other advantages over their petroleum counterparts in that they contribute to the reduction in green- house gas emissions and to sustainable development. Just a few decades after discontinuing its large scale production of bioethanol for use as en- gine fuel, South Africa (SA) is again on its way to resuscitating its biofuel industry. Herein an overview is presented on South Africa’s oilseed and biofuel production, biofuels industrial strategy, industry readiness, chal- lenges in switching to biofuels and the strategies to overcome potential obstacles.


2021 ◽  
Vol 13 (16) ◽  
pp. 8873
Author(s):  
Minghao Chen ◽  
Yixuan Chen ◽  
Qingtao Zhang

Microalgae biofuel is expected to be an ideal alternative to fossil fuels to mitigate the effects of climate change and the energy crisis. However, the production process of microalgae biofuel is sometimes considered to be energy intensive and uneconomical, which limits its large-scale production. Several cultivation systems are used to acquire feedstock for microalgal biofuels production. The energy consumption of different cultivation systems is different, and the concentration of culture medium (microalgae cells contained in the unit volume of medium) and other properties of microalgae vary with the culture methods, which affects the energy consumption of subsequent processes. This review compared the energy consumption of different cultivation systems, including the open pond system, four types of closed photobioreactor (PBR) systems, and the hybrid cultivation system, and the energy consumption of the subsequent harvesting process. The biomass concentration and areal biomass production of every cultivation system were also analyzed. The results show that the flat-panel PBRs and the column PBRs are both preferred for large-scale biofuel production for high biomass productivity.


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Wenbing Su ◽  
Zikun Shao ◽  
Man Wang ◽  
Xiaoqing Gan ◽  
Xianghui Yang ◽  
...  

AbstractLoquat (Eriobotrya japonica) is a subtropical tree that bears fruit that ripens during late spring. Fruit size is one of the dominant factors inhibiting the large-scale production of this fruit crop. To date, little is known about fruit size regulation. In this study, we first discovered that cell size is more important to fruit size than cell number in loquat and that the expression of the EjBZR1 gene is negatively correlated with cell and fruit size. Virus-induced gene silencing (VIGS) of EjBZR1 led to larger cells and fruits in loquat, while its overexpression reduced cell and plant size in Arabidopsis. Moreover, both the suppression and overexpression of EjBZR1 inhibited the expression of brassinosteroid (BR) biosynthesis genes, especially that of EjCYP90A. Further experiments indicated that EjCYP90A, a cytochrome P450 gene, is a fruit growth activator, while EjBZR1 binds to the BRRE (CGTGTG) motif of the EjCYP90A promoter to repress its expression and fruit cell enlargement. Overall, our results demonstrate a possible pathway by which EjBZR1 directly targets EjCYP90A and thereby affects BR biosynthesis, which influences cell expansion and, consequently, fruit size. These findings help to elucidate the molecular functions of BZR1 in fruit growth and thus highlight a useful genetic improvement that can lead to increased crop yields by repressing gene expression.


Blood ◽  
2012 ◽  
Vol 120 (21) ◽  
pp. 975-975
Author(s):  
Xiaosong Huang ◽  
Siddharth Shah ◽  
Ying Wang ◽  
Sarah N Dowey ◽  
Zhaohui Ye ◽  
...  

Abstract Abstract 975 Every second, a healthy human body produces ∼2 million red blood cells (RBCs), an impossible feat for patients suffering from certain anemias not alleviated by erythropoietin (EPO) therapy. Instead, they rely on blood transfusions. Currently, all blood supplies are from donors, with inherent infection risks and supply uncertainty. Furthermore, some patients (such as those with sickle cell anemia) need frequent transfusion of RBC concentrates from best-matched donors, which are difficult to find. The production of cultured human RBCs in the quantities required for transfusion therapy (about 2 trillion RBCs in one transfusion unit of blood) will have great potential for improving healthcare worldwide. Large-scale production of cultured RBCs from isolated human CD34+ post-natal hematopoietic stem/progenitor cells (HSPCs) has achieved some success in the past decade. However, many challenges remain, such as determining the best method to enhance the cell number expansion and improve the efficiency of terminal maturation. CD34+ mononuclear cells (MNCs) contain HSPCs that have high proliferative capacity, but are very rare (<1% in PB MNC and <5% in CB MNC) and unable to be expanded substantially by existing culture methods. Although ESC/iPSC can be expanded in culture unlimitedly, their differentiation into mature RBCs remains inefficient. In addition to the approach of inducing erythroid-restricted precursors (erythroblasts) in unfractionated blood MNCs to iPSCs by reprogramming factors and then differentiate back to erythropoietic cells, we also attempted to use the same or similar reprogramming factors to induce expansion (and ideally immortalization) of erythroblasts. We first culture unfractionated CB MNCs in a serum-free culture condition with several cytokines and hormones that have been shown to specifically stimulate the proliferation of immature erythroblasts (pro-basophilic erythroblasts), as we did previously to prime these cells for reprogramming them to iPSCs. While this culture condition can achieve a substantial expansion of primary erythroblasts, their expansion is still limited (about 1 million fold starting from CB MNCs) and not enough for large-scale production of cultured RBCs for repeated transfusion patients. We reasoned that some reprogramming factors that we used to derive iPSCs may be able to induce an unlimited self-renewal capability of cultured erythroblasts in combination with specific culture conditions, without stepping into a pluripotent state. To this end, we have derived several immortalized erythroblast (iE) cell lines from CB MNCs after gene transfer of specific combinations of reprogramming factors. These iE cells can be expanded exponentially in serum-free suspension culture for over 1022 fold in a period of at least 5 months. They resemble pro-basophilic erythroblasts that had a large nucleus and basophilic cytoplasm. The iE cells express immature erythroblast cell surface markers (CD235+CD36+CD45+) and intracellular fetal hemoglobin in either culture flasks or a spin and high-density culture system. The vastly expanded iE cells are karyotypically normal, growth-factor dependent, and non-leukemic. We also developed a co-culture system with stromal cells to induce the terminal maturation and enucleation of iE cells. After switching to the termination culture condition, iE cells gradually stopped growing, decreased cell size and condensed nuclei, after 2 weeks we detected enucleated erythrocytes (CD235+DRAQ5−) at about 10% to 30% of the final maturated iE cells by FACS and fluorescence microscope. Coupled with about 5 to 10 fold expansion of cell number during terminal maturation, we can get approximately the same number of enucleated erythrocytes as the input cell number of iE cells. Since mature and enucleated RBCs are devoid of DNA, the genetic modification or potential genomic alterations in the iE cells are not likely to be a main concern for clinical uses. Our result may ultimately lead to the development of unlimited sources of cultured RBCs for optimally-matched or personalized transfusion medicine. Disclosures: No relevant conflicts of interest to declare.


Cells ◽  
2019 ◽  
Vol 8 (8) ◽  
pp. 851 ◽  
Author(s):  
Musa ◽  
Ayoko ◽  
Ward ◽  
Rösch ◽  
Brown ◽  
...  

Microalgae are swift replicating photosynthetic microorganisms with several applications for food, chemicals, medicine and fuel. Microalgae have been identified to be suitable for biofuels production, due to their high lipid contents. Microalgae-based biofuels have the potential to meet the increasing energy demands and reduce greenhouse gas (GHG) emissions. However, the present state of technology does not economically support sustainable large-scale production. The biofuel production process comprises the upstream and downstream processing phases, with several uncertainties involved. This review examines the various production and processing stages, and considers the use of chemometric methods in identifying and understanding relationships from measured study parameters via statistical methods, across microalgae production stages. This approach enables collection of relevant information for system performance assessment. The principal benefit of such analysis is the identification of the key contributing factors, useful for decision makers to improve system design, operation and process economics. Chemometrics proffers options for time saving in data analysis, as well as efficient process optimization, which could be relevant for the continuous growth of the microalgae industry.


Author(s):  
S. Demianenko ◽  
M. Sahaidak ◽  
O. Sas ◽  
T. Avramenko ◽  
Ye. Levkivskyi

The analysis of activities of large-scale agri-industrial entities (LAEs) or so called «agriholdings» in Ukraine has shown their advantages in comparison with other types of farming. Their main advantage is a real agri-industrial integration including farming, processing, trading of foods, often with own trade mark, and export activity. Also, LAEs have possibilities to attract cheap financial resources from affiliated or own banks in Ukraine and abroad. As a result, they implement modern technologies in farming and processing, produce high quality foods and have good competitive positions on agricultural and food markets in Ukraine and abroad. In the LAE exist a transfer pricing that minimize the external intermediaries, taxes and increases income. It is why the most LAE pay a higher rent for the land, salary to the workers and have higher efficiency in comparison with other form of agricultural enterprises. Real agri-industrial integration in LAE is significantly different from such integration in  other agricultural entities that have small processing plants without deep reworking of agricultural row materials. LAEs provides large-scale of agricultural and processing production and have possibilities to use its advantages in form of receiving of effect of scale. The large-scale production allow them to use high productive machinery and modern technologies and thanks to this significantly increase productivity of resources, decrease costs per unit of products and, as a result, increase the efficiency of production. The narrow segment of LAEs activity is qualified personal in framework of modern agricultural and processing technologies. Existing human capital in the rural area does not meet necessary requirements because the part of active population is sharply decreasing, there are no enough qualified specialists. It should be mentioned, that problem with hiring of top managers, due to large scale and complex tasks, is one of the most actual. It is why LAE forced them self to prepare such specialists. The efficiency of eight LAEs has been evaluated. To carry out the analysis of the LAEs efficiency depending on their scale, a simulation model was developed based on the calculated correlation-regression model according to the actual data. It was determined that the dependence between the efficiency and scale of the LAEs exist at a low level. Noted that the highest level of the efficiency of functioning of the «large» LAEs is a result of the more compact layout of the production facilities and better management.


2012 ◽  
Vol 1390 ◽  
Author(s):  
S. Axmann ◽  
M. Brast ◽  
N. Wilck ◽  
H. Windgassen ◽  
M. Heuken ◽  
...  

ABSTRACTAs global energy demand is steadily growing, renewable energy generation by solar cells is becoming increasingly important. The use of mono- and polycrystalline silicon solar cells, which nowadays dominate the market, is limited by wafer size, rigidness of substrates and the requirement of large energy amounts for manufacturing. Organic solar cells (OSC) have the potential to overcome these limitations; especially organic vapor phase deposition (OVPD) technology offers the possibility of reproducible, large-scale production at low temperatures and on flexible substrates.We report on planar heterojunction OSC utilizing an active layer of pentacene/N, N’- ditridecylperylene-3, 4, 9, 10-tetracarboxylic diimide (PTCDI) fabricated by an Aixtron Gen-1 OVPD tool. The influence of substrate temperature was studied using atomic force microscopy (AFM) on single layers and bilayers. In addition electrical characterization with and without illumination of fully processed solar cells which utilize different cathode layers was carried out.AFM images indicate that crystallization of pentacene layers can be widely influenced by substrate temperature, a PTCDI-C13H27 layer atop of these covers the crystallites. Open-circuit voltage was found to be 0.47 V and short-circuit current densities beyond 0.8 mA/cm2 were measured under a spectrum close to AM 1.5 with 100 mW/cm2. Fill factors were determined to be as high as 44 %.


Author(s):  
Isaac Lorero ◽  
Arturo J. Vizcaíno ◽  
Francisco J. Alguacil ◽  
Félix A. López

An activated carbon manufacturing process using winemaking waste is analyzed and designed at industrial scale. Starting from experimental research, the chemical transformations and thermodynamics during pruning wood conversion are studied as a basis for plant design. In this way, mass and energy balances of hydrothermal carbonization and physical activation are fulfilled and a thermoeconomic methodology is applied to develop an energy-integrated plant. To achieve this target, a network of heat exchangers is allocated to minimize heat consumption and supply hot domestic water, while a cogeneration cycle is designed to provide electricity and satisfy the remaining heat demand. Furthermore, a sensitivity analysis is carried out to determine the influence of the production scale and other operation parameters, such as annual workload, service life, and capital and feedstock costs, on the economic viability of the plant. The energy balance of the plant indicates that the energy integration design manages to provide 48.9% of the overall process energy demand by crossing hot and cold streams and recovering heat from residual flue gas. On the other hand, the exergy cost analysis identifies the combustion of pruning wood used to provide heat demands as the main source of exergy destruction, confirming the suitability of integration to improve the thermodynamic performance. Including activated carbon production, electricity, and hot domestic water, the exergy efficiency of the plant stands at 11.5%.


Sign in / Sign up

Export Citation Format

Share Document