Study of a Hybrid Wind and Solar Energy Power System

2013 ◽  
Vol 316-317 ◽  
pp. 28-31
Author(s):  
Hui Yong Chen ◽  
Qiang Zhang ◽  
Qin Zhou ◽  
Yong Hui Xie
Keyword(s):  
Power Generation ◽  
Solar Energy ◽  
Power System ◽  
Hybrid System ◽  
Power Plants ◽  
Operating Time ◽  
Social Benefit ◽  
Combined Cycle ◽  
Oil Consumption ◽  
The Difference

A new kind of hybrid wind and solar energy power system was proposed in this paper. In the hybrid system, the technologies of compressed air energy storage (CAES), solar heat storage and gas-steam combined cycle power generation were combined together. At same oil consumption of 19.48 t/h, the output power of the hybrid system in the paper was 194.69 MW, while that of the conventional gas-steam combined cycle was 103.15 MW. The difference between the two cycles was 91.54 MW, which was equivalent to the amount of wind and solar energy power generation. When annual effective operating time of the hybrid system was 2600 h, the power output of wind and solar energy power generation reached 238 million kW•h. If coal-fired power plants were taken as the reference standard, about 113,050 tons of coal was saved per year. An overall benefit of Ұ604.28~626.01 million was obtained per year. As a result, a good economic, environmental and social benefit was achieved.

Study on SOFC-IGCC Hybrid Power System With High Efficiency

2007 ◽  
Author(s):  
Liqiang Duan ◽  
Yongping Yang ◽  
Ershu Xu
Keyword(s):  
Power Generation ◽  
Power System ◽  
Hybrid System ◽  
System Performance ◽  
High Efficiency ◽  
Thermal Power ◽  
Combined Cycle ◽  
Total System ◽  
Hybrid Power System ◽  
Hybrid Power

Due to its high efficiency and good environmental performance, solid oxide fuel cell (SOFC) system is very attractive for future power generation, especially integrated with the conventional power generation system. However, how to effectively integrate SOFC with the conventional thermal power system and build the hybrid system with high efficiency is still a research focus. This paper studies a novel SOFC-IGCC (integrated gasification combined cycle) hybrid power system with high efficiency. On the base of the integration idea of total energy system, a novel SOFC-IGCC hybrid power system is proposed in this paper. The energy conversion mechanism of SOFC from chemical energy to electrical energy is analyzed. The maximum potential of improving the total system performance is also analyzed. The system characteristics of the hybrid system have been studied. The optimal rules of main parameters of hybrid system are revealed. The research results obtained in this paper show that integration with SOFC system will result in a significant performance improve of the total hybrid system. The integration degree of SOFC with IGCC greatly influences the system performance of the hybrid system. Compared with the base IGCC system (the system thermal efficiency is 46%), the efficiency of SOFC-IGCC hybrid system is greatly improved and increased to approximately 52%. The achievements acquired results from this paper will provide a feasible way to develop hybrid power system and valuable information for further study on IGCC system with high efficiency.

scholarly journals Predicting the Performance of Solar Power Generation Using Deep Learning Methods

2021 ◽  
Vol 11 (15) ◽  
pp. 6887
Author(s):  
Chung-Hong Lee ◽  
Hsin-Chang Yang ◽  
Guan-Bo Ye
Keyword(s):  
Power Generation ◽  
Solar Energy ◽  
Power Output ◽  
Power Plants ◽  
Solar Power ◽  
Photovoltaic Cell ◽  
Power Prediction ◽  
Seasonal Characteristics ◽  
Variable Nature ◽  
Solar Power Plants

In recent years, many countries have provided promotion policies related to renewable energy in order to take advantage of the environmental factors of sufficient sunlight. However, the application of solar energy in the power grid also has disadvantages. The most obvious is the variability of power output, which will put pressure on the system. As more grid reserves are needed to compensate for fluctuations in power output, the variable nature of solar power may hinder further deployment. Besides, one of the main issues surrounding solar energy is the variability and unpredictability of sunlight. If it is cloudy or covered by clouds during the day, the photovoltaic cell cannot produce satisfactory electricity. How to collect relevant factors (variables) and data to make predictions so that the solar system can increase the power generation of solar power plants is an important topic that every solar supplier is constantly thinking about. The view is taken, therefore, in this work, we utilized the historical monitoring data collected by the ground-connected solar power plants to predict the power generation, using daily characteristics (24 h) to replace the usual seasonal characteristics (365 days) as the experimental basis. Further, we implemented daily numerical prediction of the whole-point power generation. The preliminary experimental evaluations demonstrate that our developed method is sensible, allowing for exploring the performance of solar power prediction.

scholarly journals Ruhrchemie/Ruhrkohle’s Technical Version of the Texaco Coal Gasifier as Part of a Combined Cycle Plant

1982 ◽  
Author(s):  
B. Cornils ◽  
J. Hibbel ◽  
P. Ruprecht ◽  
R. Dürrfeld ◽  
J. Langhoff
Keyword(s):  
High Pressure ◽  
Power Plants ◽  
Coal Gasification ◽  
Operating Time ◽  
Combined Cycle ◽  
Gas Generation ◽  
Load Following ◽  
Gasification Process ◽  
Steady State Operation ◽  
Combined Cycle Plant

The Ruhrchemie/Ruhrkohle variant of the Texaco Coal Gasification Process (TCGP) has been on stream since 1978. As the first demonstration plant of the “second generation” it has confirmed the advantages of the simultaneous gasification of coal: at higher temperatures; under elevated pressures; using finely divided coal; feeding the coal as a slurry in water. The operating time so far totals 9000 hrs. More than 50,000 tons of coal have been converted to syn gas with a typical composition of 55 percent CO, 33 percent H2, 11 percent CO2 and 0.01 percent of methane. The advantages of the process — low environmental impact, additional high pressure steam production, gas generation at high pressure levels, steady state operation, relatively low investment costs, rapid and reliable turn-down and load-following characteristics — make such entrained-bed coal gasification processes highly suitable for power generation, especially as the first step of combined cycle power plants.

scholarly journals STATE AND PROSPECTS OF THERMAL POWER GENERATION IN THE CONDITIONS OF UKRAINE’S COURSE ON CARBON-FREE ENERGY

2021 ◽  
pp. 4-16
Author(s):  
M.V. Cherniavskyi
Keyword(s):  
Power Generation ◽  
Free Energy ◽  
Power System ◽  
Fuel Consumption ◽  
Power Plants ◽  
Thermal Power ◽  
Specific Fuel Consumption ◽  
Regulatory Function ◽  
Thermal Power Plants ◽  
Thermal Power Generation

The structure of electricity cost formation for consumers, including depending on the cost of TPP generation, «green» energy and other sources, is investigated, and the main conditions of the efficient regulatory function fulfillment in the power system by thermal power generation in the conditions of Ukraine's course on carbon-free energy are formulated. It is shown that excessive electricity losses in networks and, especially, accelerated increase of the share of «green» generation, much more expensive than nuclear, hydro and thermal, mainly contribute to the growth of electricity costs for non-household consumers and the need to raise tariffs for the population. This accelerated increase directly contradicts the Paris Climate Agreement, according to which plans to reduce Ukraine’s greenhouse gas emissions must be developed taking into account available energy resources and without harming its own economy. The dependences of the specific fuel consumption on the average load and the frequency of start-stops of units are found and it is shown that the increased specific fuel consumption on coal TPPs is an inevitable payment for their use as regulating capacities of UES of Ukraine. In this case, the higher the proportion of «green» generation and a smaller proportion of generating thermal power plants, especially increasing specific fuel consumption. It is proved that in the conditions of growth of the share of «green» generation in Ukraine the share of production of pulverized coal thermal power plants should be kept at the level of not less than 30 % of the total electricity generation. It is substantiated that a necessary condition for coal generation to perform a proper regulatory role in the power system is to introduce both environmental and technical measures, namely — reducing the suction of cold air to the furnace and other boiler elements, restoring condensers and cooling systems, etc. An important factor in reducing the average level of specific fuel consumption is also the reduction of coal burn-out at thermal power plants, where it still remains significant, due to the transfer of power units to the combustion of bituminous coal concentrate. Bibl. 12, Fig. 5, Tab. 5.

Sequential Combustion in Ansaldo Energia Gas Turbines: The Technology Enabler for CO2-Free, Highly Efficient Power Production Based on Hydrogen

2020 ◽  
Author(s):  
Andrea Ciani ◽  
John P. Wood ◽  
Anders Wickström ◽  
Geir J. Rørtveit ◽  
Rosetta Steeneveldt ◽  
...  
Keyword(s):  
Power Generation ◽  
Free Energy ◽  
Gas Turbines ◽  
Carbon Capture ◽  
Power Plants ◽  
Carbon Capture And Storage ◽  
Combined Cycle ◽  
Fuel Flexibility ◽  
Combustion Technology ◽  
And Storage

Abstract Today gas turbines and combined cycle power plants play an important role in power generation and in the light of increasing energy demand, their role is expected to grow alongside renewables. In addition, the volatility of renewables in generating and dispatching power entails a new focus on electricity security. This reinforces the importance of gas turbines in guaranteeing grid reliability by compensating for the intermittency of renewables. In order to achieve the Paris Agreement’s goals, power generation must be decarbonized. This is where hydrogen produced from renewables or with CCS (Carbon Capture and Storage) comes into play, allowing totally CO2-free combustion. Hydrogen features the unique capability to store energy for medium to long storage cycles and hence could be used to alleviate seasonal variations of renewable power generation. The importance of hydrogen for future power generation is expected to increase due to several factors: the push for CO2-free energy production is calling for various options, all resulting in the necessity of a broader fuel flexibility, in particular accommodating hydrogen as a future fuel feeding gas turbines and combined cycle power plants. Hydrogen from methane reforming is pursued, with particular interest within energy scenarios linked with carbon capture and storage, while the increased share of renewables requires the storage of energy for which hydrogen is the best candidate. Compared to natural gas the main challenge of hydrogen combustion is its increased reactivity resulting in a decrease of engine performance for conventional premix combustion systems. The sequential combustion technology used within Ansaldo Energia’s GT36 and GT26 gas turbines provides for extra freedom in optimizing the operation concept. This sequential combustion technology enables low emission combustion at high temperatures with particularly high fuel flexibility thanks to the complementarity between its first stage, stabilized by flame propagation and its second (sequential) stage, stabilized by auto-ignition. With this concept, gas turbines are envisaged to be able to provide reliable, dispatchable, CO2-free electric power. In this paper, an overview of hydrogen production (grey, blue, and green hydrogen), transport and storage are presented targeting a CO2-free energy system based on gas turbines. A detailed description of the test infrastructure, handling of highly reactive fuels is given with specific aspects of the large amounts of hydrogen used for the full engine pressure tests. Based on the results discussed at last year’s Turbo Expo (Bothien et al. GT2019-90798), further high pressure test results are reported, demonstrating how sequential combustion with novel operational concepts is able to achieve the lowest emissions, highest fuel and operational flexibility, for very high combustor exit temperatures (H-class) with unprecedented hydrogen contents.

300 MW Combined-Cycle Plant With Integrated Coal Gasification

1984 ◽  
Author(s):  
Rolf H. Kehlhofer
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Gas Turbines ◽  
Power Plants ◽  
Coal Gasification ◽  
District Heating ◽  
Combined Cycle ◽  
Liquid Fuels ◽  
Combined Cycle Plant ◽  
The Individual

In the past 15 years the combined-cycle (gas/steam turbine) power plant has come into its own in the power generation market. Today, approximately 30 000 MW of power are already installed or being built as combined-cycle units. Combined-cycle plants are therefore a proven technology, showing not only impressive thermal efficiency ratings of up to 50 percent in theory, but also proving them in practice and everyday operation (1) (2). Combined-cycle installations can be used for many purposes. They range from power plants for power generation only, to cogeneration plants for district heating or combined cycles with maximum additional firing (3). The main obstacle to further expansion of the combined cycle principle is its lack of fuel flexibility. To this day, gas turbines are still limited to gaseous or liquid fuels. This paper shows a viable way to add a cheap solid fuel, coal, to the list. The plant system in question is a 2 × 150 MW combined-cycle plant of BBC Brown Boveri with integrated coal gasification plant of British Gas/Lurgi. The main point of interest is that all the individual components of the power plant described in this paper have proven their worth commercially. It is therefore not a pilot plant but a viable commercial proposition.

Enhancing Gas Turbine Operation With Heavy Fuel Oil

2013 ◽  
Author(s):  
Vikram Muralidharan ◽  
Matthieu Vierling
Keyword(s):  
Power Generation ◽  
Natural Gas ◽  
Gas Turbine ◽  
Power Plants ◽  
High Efficiency ◽  
Combined Cycle ◽  
Fuel Oil ◽  
Residual Oil ◽  
Heavy Fuel Oil ◽  
Hydro Power

Power generation in south Asia has witnessed a steep fall due to the shortage of natural gas supplies for power plants and poor water storage in reservoirs for low hydro power generation. Due to the current economic scenario, there is worldwide pressure to secure and make more gas and oil available to support global power needs. With constrained fuel sources and increasing environmental focus, the quest for higher efficiency would be imminent. Natural gas combined cycle plants operate at a very high efficiency, increasing the demand for gas. At the same time, countries may continue to look for alternate fuels such as coal and liquid fuels, including crude and residual oil, to increase energy stability and security. In over the past few decades, the technology for refining crude oil has gone through a significant transformation. With the advanced refining process, there are additional lighter distillates produced from crude that could significantly change the quality of residual oil used for producing heavy fuel. Using poor quality residual fuel in a gas turbine to generate power could have many challenges with regards to availability and efficiency of a gas turbine. The fuel needs to be treated prior to combustion and needs a frequent turbine cleaning to recover the lost performance due to fouling. This paper will discuss GE’s recently developed gas turbine features, including automatic water wash, smart cooldown and model based control (MBC) firing temperature control. These features could significantly increase availability and improve the average performance of heavy fuel oil (HFO). The duration of the gas turbine offline water wash sequence and the rate of output degradation due to fouling can be considerably reduced.

Modeling Combined Cycle Power Plants for Power System Restoration Studies

2012 ◽  
Vol 27 (2) ◽  
pp. 340-350 ◽  
Author(s):  
Stefano Barsali ◽  
Antonio De Marco ◽  
Giorgio Maria Giannuzzi ◽  
Franco Mazzoldi ◽  
Andrea Possenti ◽  
...  
Keyword(s):  
Power System ◽  
Power Plants ◽  
Combined Cycle ◽  
Power System Restoration ◽  
System Restoration

The Gas Turbine Family GT13E and GT13E2 Provides Reliable Power for Asia

1996 ◽  
Author(s):  
Gregor Gnädig
Keyword(s):  
Power Generation ◽  
Gas Turbines ◽  
Power Plants ◽  
High Efficiency ◽  
Operating Experience ◽  
Diesel Oil ◽  
Combined Cycle ◽  
Asian Countries ◽  
High Efficient ◽  
Prime Movers

Many Asian countries are experiencing economic growth which averages 5–10% per year. This environment has led to a privatization process in the power generation industry from typically state-run utilities to a system in which a federal agency oversees a market divided by private utilities and independent power producers (IPP) with the need for high efficiency, reliable power generation running on natural gas and diesel oil. In the 50 Hz market, modem, high efficient gas turbines of the type GT13E and GT13E2 have been chosen as prime movers in many combined cycle power plants in Asian countries. This paper includes a product description, and a general overview of GT13E and GT13E2 operating experience, well as an economic evaluation of a typical 500 MW combined cycle power plant.

scholarly journals The Optimization of Combined Cycle HRSGs as a Function of the Plant Load Duty

1996 ◽  
Author(s):  
P. J. Dechamps
Keyword(s):  
Power Generation ◽  
Steam Generator ◽  
Heat Recovery ◽  
Power Plants ◽  
Combined Cycle ◽  
Load Factor ◽  
Heat Recovery Steam Generator ◽  
Economic Optimization ◽  
Cost Of Electricity ◽  
The Cost

Natural gas fired combined cycle power plants now take a substantial share of the power generation market, mainly because they can be delivering power with a remarkable efficiency shortly after the decision to install is taken, and because they are a relatively low capital cost option. The power generation markets becoming more and more competitive in terms of the cost of electricity, the trend is to go for high performance equipments, notably as far as the gas turbine and the heat recovery steam generator are concerned. The heat recovery steam generator is the essential link in the combined cycle plant, and should be optimized with respect to the cost of electricity. This asks for a techno-economic optimization with an objective function which comprises both the plant efficiency and the initial investment. This paper applies on an example the incremental cost method, which allows to optimize parameters like the pinch points and the superheat temperatures. The influence of the plant load duty on this optimization is emphasized. This is essential, because the load factor will not usually remain constant during the plant life-time. The example which is presented shows the influence of the load factor, which is important, as the plant goes down in merit order with time, following the introduction of more modern, more efficient power plants on the same grid.

Sign in / Sign up

Export Citation Format

Share Document