Study on User Experience and User Cognitive in Product Design

2013 ◽  
Vol 318 ◽  
pp. 174-176 ◽  
Author(s):  
Ren Qiang Lin ◽  
He Li ◽  
Meng Ma ◽  
Wen Wang
Keyword(s):  
Product Design ◽  
Design Process ◽  
User Experience ◽  
Design Theory ◽  
Industrial Design ◽  
Current Field ◽  
User Awareness ◽  
Correct Understanding ◽  
Play Space ◽  
Reasonable Use

At present, many domestic and international products' design are promoted the design concept based on the user experience or user awareness. It has been generally aware of the industrial design is no longer just belong to the narrow shape and design areas, therefore a correct understanding of user experience and user awareness is very necessary, whereas in the study of design theory, a lot of people have user experience mixed with user awareness as one concept, it's a truth that the both are closely linked, while there are certain differences between them, if they are mixed together, it will not only narrow us thinking play space, but also disable to achieve greater breakthroughs in the design process of innovation, on the contrary if the correct understanding and reasonable use of the both and furthermore transplanted into the design of the product, for the current field of industrial design, it is a huge reform and innovation.

scholarly journals Engineering and Industrial Design: An Integrated Interdisciplinary Design Theory

2008 ◽  
Author(s):  
Alexander N. Brezing ◽  
Manuel Lo¨wer
Keyword(s):  
Engineering Design ◽  
Design Process ◽  
Design Theory ◽  
Design Research ◽  
Industrial Design ◽  
Product Model ◽  
Theoretical Approaches ◽  
Interdisciplinary Design ◽  
Industrial Designers ◽  
The One

It is generally accepted that superior products result from a balanced consideration of both “technology” and “aesthetic design”. Nonetheless, the gap between the two professions of the “design engineer” and the “industrial designer” has not been bridged since their origination in the course of industrialization [7]. One possible approach to enhance the collaboration of both disciplines is to teach the basics of the respective other’s. In Germany, the main work following this approach of trying to prepare engineers for design collaborations is the VDI guideline 2424 (“The Industrial Design Process”) [21], which was worked out and released in three parts from 1984 to 1988 by a group of engineering design researchers and industrial designers. As no accepted industrial design theory could be identified at that time, the authors of the guideline tried to apply some of engineering design methodology’s proven methods taken from the VDI guideline 2221 [19] that seemed to fit to industrial design. That approach ultimately failed, as the authors of the guideline had to conclude themselves in the opening remarks of its last part [21]. Even if the guideline is still officially in use for the lack of a replacement, it is hardly used in engineering education. Since then however, accepted theoretical approaches have been produced by industrial design research that allow for the definition of an interdisciplinary theory on product development. This paper introduces these approaches and arranges them together with models of engineering design methodology to serve as a basis for a design theory that explains both domains’ competences and responsibilities. A function-oriented product model is set up that illustrates existing interdependencies by classifying a technical product/project according to the relative importance of its technical function (engineering’s competence) on the one hand and its semiotic functions (industrial design’s competence) on the other. The realization of industrial design’s competence as signification and the organization of its devices according to the model of semiotic functions explain existing organizational problems of interdisciplinary design practice. It is demonstrated why industrial design cannot proceed according a purely technical design process such as the one defined in the VDI guideline 2221 and what implications that has on interdisciplinary design projects.

Impact of Traditional Chinese Culture in Product Design to Using Experience

2014 ◽  
Vol 644-650 ◽  
pp. 5904-5907
Author(s):  
Ming Hui Li ◽  
Xu Liu
Keyword(s):  
Product Design ◽  
User Experience ◽  
Chinese Culture ◽  
Industrial Design ◽  
Evaluation Criteria ◽  
Traditional Culture ◽  
Design Evaluation ◽  
Product Experience ◽  
The Core ◽  
Traditional Chinese Culture

Industrial design has been developed in China for decades, it is with the constant collision of traditional Chinese culture and learned a variety of nutrients. Increasingly focused on product design aspects of traditional culture. Meanwhile, the product experience has become the core of the product design evaluation criteria. Many aspects of traditional culture will affect the user experience on the use of the product.

scholarly journals Exploration of Digital Twin Design Mechanism of the Deep in Situ Rock Insulation Coring Device

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Bo Yu ◽  
Heping Xie ◽  
Ling Chen ◽  
Wu Zhao ◽  
Zhiqiang He
Keyword(s):  
Product Design ◽  
Design Process ◽  
Design Theory ◽  
Large Scale ◽  
Design Method ◽  
High Fidelity ◽  
Time Data ◽  
Innovative Design ◽  
Digital Twin

With the development of the resource exploration and environmental science drilling, strict and scientific requirements are put forward for the samples taken from drilling. It is significant to keep the original appearance of the core and obtain the in situ core for the analysis of deep geological fluid and the exploration of the law of geological disasters caused by large-scale geological exploitation. To achieve the high-fidelity in situ core of deep rock, the development of the corresponding deep in situ fidelity coring device should involve the insulation coring device. The development of deep in situ fidelity coring device is a typical sophisticated product design. There are many problems in the design process, such as multimodules, multidisciplinary, crossdomain, and high coupling, which makes it more difficult for users to participate in product design and understand the product design intention. Digital twin technology, such as time data collection, accelerated iterative optimization, and high-fidelity rendering, provides users with an immersive experience and deepens their understanding of the product design intention. The exploration of the novel design model combined digital twin technology with innovative design theory. Digital twin innovative design of the deep in situ insulation coring device is based on the innovative design method, which built a digital connection between the pre-research test platform and the corresponding simulation models. This digital twin to help users participate in product design and understand the product design process. Finally, the TOPSIS evaluation model was used to calculate the user’s score on the design scheme, which increased by 27.64%, which improves the overall efficiency of product design. This paper provides a practical design method and technical means for the design of the deep in situ insulation coring device based on the geological mechanism and control theory of thermal insulation core.

scholarly journals Exploring and Adapt! – Extending the Adapt! Method to Develop Reconfigurable Manufacturing Systems

2018 ◽  
Vol 223 ◽  
pp. 01006 ◽  
Author(s):  
Kate Kujawa ◽  
Jakob Weber ◽  
Erik Puik ◽  
Kristin Paetzold
Keyword(s):  
Product Design ◽  
Design Process ◽  
Design Theory ◽  
Manufacturing Systems ◽  
New Products ◽  
Axiomatic Design ◽  
Reconfigurable Manufacturing Systems ◽  
Reconfigurable Manufacturing ◽  
Axiomatic Design Theory ◽  
Exploration Phase

Automotive production is faced with the challenge of bringing new products to market faster, with decreasing turn-around times, meaning production must be continually changing to accommodate new products. This paper proposes an approach to decrease a product’s time-to-market, by increasing the efficiency of automotive assembly unit design. Providing designers with conceptual information about future vehicle models early in the product design process, could shift the design start forward and enable a more efficient transition process. Large automotive companies work on vehicle design and development for years before a product is ready for production. If during these earlier stages of product design, significant changes are identified and communicated to production designers, the manufacturing system design can get a jump start with an early exploration phase. A method exists, which uses the Axiomatic Design theory to develop Reconfigurable Manufacturing Systems through a modular breakdown. A similar method Adapt! employs Axiomatic Design and Scrum to develop changeable or adaptable production systems. This paper proposes to extend the Adapt! method to include an exploration phase, which through early communication, provides an overview of the required design process, and enables faster identification of the critical design challenges. A case study is performed by analysing a currently produced vehicle and its future electric version.

Green Design Concept of Ergonomics in Industrial Design and its Wide Application in the Graphic Communications Industry

2011 ◽  
Vol 71-78 ◽  
pp. 3433-3437 ◽  
Author(s):  
Chang Xian Cheng
Keyword(s):  
Product Design ◽  
Design Theory ◽  
Industrial Design ◽  
Green Design ◽  
Design Stage ◽  
Mechanical Equipment ◽  
Manufacturing Cost ◽  
Ecological Damage ◽  
Communications Industry ◽  
Graphic Communications

Today’s industrial design has gone beyond the traditional product design. China is in the transfer process from the world's manufacturing plant to the world's manufacturing center. Green design is the basis of access to green products, and has become one of the hot researches in design areas. The results show that the design phase determines the 70% to 80% of manufacturing cost, while the design itself accounts for only 10% of the total cost. The importance of the roll of design to product is still increasing if considering the environmental factors. Because the level of ecological damage caused by the product design is far greater than the level of ecological damage caused by the design process itself, only in the design stage should the "green level" of products be taken as a design target, the desired design result could be achieved, which is one of the goal of ergonomics. In today's information society, the graphic communications industry is charged with an irreplaceable task of information manufacture and dissemination. A variety of devices (including electronic, optical, mechanical equipment and instruments, and even household facilities and equipment, etc.) used by the modern graphic communications industry need the direct contact, operation or use of the operator. Design and manufacture of these devices need to apply modern ergonomic design theory and research results. In this paper, the importance of ergonomics, the features and research aspects of green design, developing trends of ergonomics, and the application of ergonomics in the graphic communications industry are described.

Research of Virtual Model Making System for Computer Aided Industrial Design

2011 ◽  
Vol 121-126 ◽  
pp. 882-886
Author(s):  
Bin Qi ◽  
Bo Zhao ◽  
Xia Sun ◽  
Xiao Ming Sun
Keyword(s):  
Product Design ◽  
Virtual Environment ◽  
Design Process ◽  
Industrial Design ◽  
Teaching Method ◽  
Design Method ◽  
Virtual Model ◽  
Shape Features ◽  
Computer Aided ◽  
Qualitative Changes

Computer aided industrial design (CAID) brings qualitative changes for traditional industrial design on the sides of design method, process and theory. In this paper a new method is proposed with the aim of making the model capable of holding and manipulating the shape features in order to support the students in the design process. The key concept of this study is virtual model making system (VMMS) which consists of numerous sets of rules. VMMS is a new CAID method, and its technical ideas derive from the model making process of automotive product design. With this new CAID method, designers can do any kinds of styling operations on virtual model in the virtual environment generated by computer, such as the cutting or pasting operation on kinds of material. The system was described briefly and a new teaching method of industrial design course was introduced.

Design for Patentability (DFP)

2011 ◽  
Author(s):  
Prakash C. R. J. Naidu ◽  
Kshirsagar C. J. Naidu
Keyword(s):  
System Design ◽  
Product Design ◽  
Design Process ◽  
Process Design ◽  
Design Theory ◽  
Axiomatic Design ◽  
Design Parameters ◽  
Automation System ◽  
Product Design Process ◽  
Axiomatic Design Theory

This paper introduces a new approach named Design for Patentability (DFP) and presents the preliminary formulation of a formal methodology to attempt consideration of patentability aspects during the early stages of design including conceptual design and initial implementation of detailed design and manufacturing. Design for Automation (DFAM) approach formulated earlier by the first author based on Axiomatic Design Theory originated by Suh et. al. at MIT is adapted, suitably modified and customized for inclusion of patentability aspects such as anticipation, functionality, utility, and obviousness. Highlighting the complexity in incorporation of legal aspects in an engineering methodology, the paper presents the possibilities of improving the patentability of a design by a systematic and considered approach. The proposed methodology introduces a Patentability Evaluation phase in-between the Product Design, Process Design and Automation System Design phases of DFAM. The paper reviews mapping of parameters between different domains, namely, Functional Requirements Domain, Design Parameters Domain, Process Requirements Domain, and Design Automation Parameters Domain encompassed in the DFAM methodology and includes Patentability Parameters Domain in parallel to the last three domains to enable possible consideration of patentability aspects during Product Design, Process Design, and Automation System Design. Further, the paper briefly discusses the relevance of the Information Axiom of the Axiomatic Design Theory in the context of preparation of preliminary drafts of invention disclosure and potential claims for perusal by patent agents or attorneys. The approach reported in the paper is expected to have broad applications in the growing field of innovation based entrepreneurship in which design for patentability is an essential requirement for success of a business venture.

scholarly journals DESIGN PERSONAS – NEW WAYS, NEW CONTEXTS

2018 ◽  
Vol 4 (2) ◽  
pp. 1-4 ◽  
Author(s):  
Lene Nielsen
Keyword(s):  
Software Development ◽  
Product Design ◽  
Design Process ◽  
User Experience ◽  
Design Tool ◽  
Experience Design ◽  
User Experience Design ◽  
The Everyday ◽  
User Groups ◽  
Everyday Experiences

Design personas have, since their origins in the late 1990s, been recognised as a design tool to foster ideation and empathy with different user groups. The method originates from software development and has since its instigation become a widespread method adopted in many design disciplines and processes, such as innovation and ideation of IT products, User Experience design, agile systems developing, communication, and marketing (Nielsen 2012; Pruitt & Grudin 2003). To get product design closer to the everyday lives of the users, design personas are a means to capture the everyday experiences and needs of users and customers. Focusing on the user or customer in the design process is in opposition to an artistic understanding of the designer as someone who, by experimentation with materials and form, gets inspiration to create unique products.

Sign in / Sign up

Export Citation Format

Share Document