Vibration Characteristics of Composite Plate Embedded with Shape Memory Alloy at Elevated Temperature

2013 ◽  
Vol 393 ◽  
pp. 655-660 ◽  
Author(s):  
Izzuddin Zaman ◽  
Bukhari Manshoor ◽  
Amir Khalid ◽  
Sherif Araby ◽  
Mohd Imran bin Ghazali
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Composite Structures ◽  
Composite Plate ◽  
Free Vibration Analysis ◽  
Composite Plates ◽  
Vibration Characteristics ◽  
Modal Testing ◽  
Phase Transformation Temperature ◽  
Wide Range

Unique functional material of shape memory alloy has attracted tremendous interest from researches, thus has been broadly investigated for a wide range application. Current research effort extends the use of SMA for the design of smart composite structures due to its shape memory effect, pseudo-elasticity and high damping capability. This paper presents an assessment of applications of the SMA materials for structural vibration controls, where the influences of SMA as reinforcement in the composite plate at different temperature are investigated. Four cases of composite plate are studied, which two of them are SMA-based composite fabricated at 0° and 45° angles, and the other two plates are neat (without SMA wires) and built with local stiffener. By using modal testing, the free vibration analysis is carried out to determine the vibration characteristics of composite plates. The results show that infusing SMA wires into composites increased the natural frequencies of the plate considerably, while decreased slightly for damping percentage. However, when SMA wires are heated, the damping percentage improved tremendously due to the phase transformation temperature of SMA from martensite to austenite. The outcome of this study reveals the potential of SMA materials in active vibration control.

scholarly journals Shape Memory Alloy Hybrid Composites for Improving Impact Properties

2021 ◽  
pp. X
Author(s):  
Chuanliang SHEN ◽  
Xiaodong XU ◽  
Xiaoyu MA ◽  
Yibo HU ◽  
Shan ZHANG ◽  
...  
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Composite Plate ◽  
Hybrid Composites ◽  
Mechanical Energy ◽  
Impact Resistance ◽  
Composite Plates ◽  
Impact Response ◽  
Impact Properties ◽  
The Impact

This paper investigates the method to improve the property that can decrease the impact response of composite plate. Embedding the super-elastic shape memory alloy wires into composite plates has increased the attention of material researchers. Super-elastic shape memory alloy has the properties of absorbing mechanical energy, large recoverable deformation and so on. In this study, experiments were conducted to analyze the impact properties of composite plates with Ni-Ti SMA wires. Composite plates with Ni-Ti SMA wires and without Ni-Ti SMA wires were subjected to two impacts respectively. This study measured the responses of two impacts. The results showed that the composite plate with Ni-Ti SMA wires were subjected to a second impact with a peak deflection of 5.47 mm, which was only 0.22 mm larger than the first impact. The relevant data of the composite plate without Ni-Ti SMA wires were 9.02 mm, 1.22 mm, and serious damage occurred. It was verified that the Ni-Ti SMA wires improved the impact resistance of the composite plate. After studying the impact tests of variable diameters of SMA wires embedded at the low layer of composite plate, it was shown that as the diameter of SMA wires increased, the impact resistance of composite plates was improved.

Maximizing the Fundamental Natural Frequency of Triangular Composite Plates

1996 ◽  
Vol 118 (2) ◽  
pp. 141-146 ◽  
Author(s):  
S. Abrate
Keyword(s):  
Natural Frequency ◽  
Material Properties ◽  
Composite Structures ◽  
Natural Frequencies ◽  
Ritz Method ◽  
Laminated Composite ◽  
Composite Plates ◽  
Mode Shapes ◽  
Fundamental Natural Frequency ◽  
Wide Range

While many advances were made in the analysis of composite structures, it is generally recognized that the design of composite structures must be studied further in order to take full advantage of the mechanical properties of these materials. This study is concerned with maximizing the fundamental natural frequency of triangular, symmetrically laminated composite plates. The natural frequencies and mode shapes of composite plates of general triangular planform are determined using the Rayleigh-Ritz method. The plate constitutive equations are written in terms of stiffness invariants and nondimensional lamination parameters. Point supports are introduced in the formulation using the method of Lagrange multipliers. This formulation allows studying the free vibration of a wide range of triangular composite plates with any support condition along the edges and point supports. The boundary conditions are enforced at a number of points along the boundary. The effects of geometry, material properties and lamination on the natural frequencies of the plate are investigated. With this stiffness invariant formulation, the effects of lamination are described by a finite number of parameters regardless of the number of plies in the laminate. We then determine the lay-up that will maximize the fundamental natural frequency of the plate. It is shown that the optimum design is relatively insensitive to the material properties for the commonly used material systems. Results are presented for several cases.

A simplified analytical model to simulate martensite reorientation and plasticity in shape memory alloy ring couplers

2021 ◽  
pp. 1045389X2110572
Author(s):  
Fabrizio Niccoli ◽  
Valentina Giovinco ◽  
Cedric Garion ◽  
Carmine Maletta ◽  
Paolo Chiggiato
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Analytical Model ◽  
High Vacuum ◽  
Ring Expansion ◽  
Particle Accelerators ◽  
European Organization ◽  
Elastic Plastic ◽  
Wide Range ◽  
Martensite Reorientation

Recent studies on Shape Memory Alloy rings have been undertaken at the European Organization for Nuclear Research (CERN) to develop smart and leak-tight couplers for Ultra High Vacuum systems of particle accelerators. A special thermo-mechanical process (training) is needed to provide SMA rings with proper functional properties, that is to allow thermal mounting, dismounting, and leak tight coupling within a given service temperature window. Low temperature ring expansion is a crucial part of the training process as it gives suitable size, shape recovery properties, and thermal stability range to the SMA element. An analytical model, based on simplified elastic-plastic axisymmetric concepts, has been developed and implemented in a commercial software to simulate isothermal SMA rings expansions. It is particularly useful to predict the final size of a martensitic SMA coupler as a function of the initial dimensions and of the pre-deformation parameters. The effectiveness of the model has been demonstrated by analyzing the stress/deformation field occurring in a wide range of ring geometries for different load cases including martensite reorientation and plasticity. The predictions of the analytical model have been systematically compared with those obtained by axisymmetric finite element (FE) analyses based on elastic-plastic constitutive models and experimental measurements.

The Strain Energy Tuning of the Shape Memory Alloy on the Post-Buckling of Composite Plates Using Finite Element Method

2012 ◽  
Vol 445 ◽  
pp. 577-582
Author(s):  
Zainudin A. Rasid ◽  
Saiful Amri Mazlan ◽  
Amran Ayob ◽  
Rizal Zahari ◽  
Dayang Laila Majid ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Strain Energy ◽  
Composite Plates ◽  
Post Buckling ◽  
Energy Tuning ◽  
Element Method

scholarly journals The Instability Improvement of the Symmetric Angle-Ply and Cross-Ply Composite Plates with Shape Memory Alloy Using Finite Element Method

2014 ◽  
Vol 6 ◽  
pp. 632825 ◽  
Author(s):  
Zainudin A. Rasid ◽  
Rizal Zahari ◽  
Amran Ayob
Keyword(s):  
Finite Element ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Volume Fraction ◽  
Shear Deformation Theory ◽  
Composite Plates ◽  
Element Formulation ◽  
Recovery Stress ◽  
Buckling Behavior ◽  
Post Buckling

Shape memory alloy (SMA) wires were embedded within laminated composite plates to take advantage of the shape memory effect property of the SMA in improving post-buckling behavior of composite plates. A nonlinear finite element formulation was developed for this study. The plate-bending formulation used in this study was developed based on the first order shear deformation theory, where the von Karman's nonlinear moderate strain terms were added to the strain equations. The effect of the SMA was captured by adding recovery stress term in the constitutive equation of the SMA composite plates. Values of the recovery stress of the SMA were determined using Brinson's model. Using the principle of virtual work and the total Lagrangian approach, the final finite element nonlinear governing equation for the post-buckling of SMA composite plates was derived. Buckling and post-buckling analyses were then conducted on the symmetric angle-ply and cross-ply SMA composite plates. The effect of several parameters such as the activation temperature, volume fraction, and the initial strain of the SMA on the post-buckling behavior of the SMA composite plates were studied. It was found that significant improvements in the post-buckling behavior for composite plates can be attained.

Sign in / Sign up

Export Citation Format

Share Document