Design of Image Transmission Platform Based on FPGA and USB

2014 ◽  
Vol 543-547 ◽  
pp. 862-865
Author(s):  
Bo Ya Zhang ◽  
Xiao Hui Yang
Keyword(s):  
Image Processing ◽  
Data Transmission ◽  
Image Acquisition ◽  
Image Data ◽  
Image Transmission ◽  
Nios Ii ◽  
Cpu Utilization

This paper designed an image transmission based on FPGA and USB platform, it can complete the verification function of the image acquisition. The image data was stored in the external SDRAM of the FPGA, using Nios II to control each module, it was sent to PC through the UAB bus used CY7C68013A chip and displayed on LabVIEW. In the process of data transmission, the DMA technology accelerated the speed of transmission and reduced the rate of CPU utilization. After experiments, this platform accomplished the functions of image acquisition, image processing and binocular positioning; it has a simple, intuitive display and good compatibility characteristics.

scholarly journals Performance of Polar-Coded 3D Image Transmission over Fading Channel

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Jianjun Hao ◽  
Luyao Liu ◽  
Wei Chen
Keyword(s):  
White Noise ◽  
Data Transmission ◽  
Fading Channel ◽  
Point Cloud ◽  
Gaussian White Noise ◽  
Image Data ◽  
Image Transmission ◽  
Transmission System ◽  
3D Point Cloud ◽  
3D Image

Any signal transmitted over an air-to-ground channel is corrupted by fading, noise, and interference. In this paper, a Polar-coded 3D point cloud image transmission system with fading channel is modeled, and also the simulation is performed to verify its performance in terms of 3D point cloud image data transmission over Rician channel with Gaussian white noise and overlap of Gaussian white noise + periodic pulse jamming separately. The comparison of Polar-coded scheme with RS-coded scheme in the same scenario indicates that Polar-coded system gives far better performance against AWGN noise and fading than the RS-coded system does in the case of short block length. But RS-coded scheme shows better performance on antipulse jamming than that of Polar-coded scheme, while there is no interleaving between codewords.

scholarly journals Design and implementation of remote image processing system for space launch site

2021 ◽  
Vol 233 ◽  
pp. 04026
Author(s):  
Ma Li ◽  
Wang Bai Yan ◽  
Liu Tao ◽  
WangYu Chao ◽  
Xiang Yu ◽  
...  
Keyword(s):  
Image Processing ◽  
Auxiliary Information ◽  
Processing System ◽  
Image Data ◽  
Image Transmission ◽  
Engineering Practice ◽  
Image Processing System ◽  
Rocket Flight ◽  
Launch Site ◽  
Space Launch

Telemetry image has the characteristics of intuitive image in the process of rocket flight. Through real-time acquisition of rocket flight video image, it can provide the working status of key nodes in the process of rocket flight, and provide intuitive decision-marking auxiliary information for commanders. This paper analyzes the design content of the image processing system of the space launch site from the aspects of image transmission mechanism, information flow, image data processing and image decoding, so as to provide technical basis for the image receiving, transmission and decoding process in the engineering practice of the image processing system.

scholarly journals PENGOLAHAN CITRA DIGITAL BERBASIS WIRELESS 2.4 GHz DENGAN MEMANFAATKAN ARDUINO UNO REV 3

Compiler ◽  
2015 ◽  
Vol 4 (1) ◽  
Author(s):  
Andika Agung Firmansyah ◽  
Denny Dermawan
Keyword(s):  
Image Processing ◽  
Digital Image ◽  
Data Transmission ◽  
Data Transfer ◽  
Image Data ◽  
Radio Waves ◽  
Picture Quality ◽  
Image Capture ◽  
Arduino Uno ◽  
Transmission Capability

Digital image processing of a system capable of generating digital image data and software as a medium to display the digital image data that uses radio waves to send data in HEX and convert in the form of images. Linksprite camera which enable to produce the digital image data and utilize the arduino UNO as a controller to send commands to the camera image capture and send the digital image data to the PC. The process of digital image based data transmission by radio waves utilizing the XBee Pro Series 1 . Results of testing the system implemented in the outdoor can take a longer distance when compared with the application of the system in the room . At a distance of 10-250 meters complete the full HEX data transmission and produces good images , with time ranging 2m.29s.39ms-2m.36s.56ms. Distance of 260-450 meters with a time of 2m.05s.02ms - 06ms 2m 01s but the picture quality is not good. At a distance of 500-530 meters with a time of 1m.10s.23ms-0m.50s.59ms produce images that are very less. While the distance of > 550 meters is the limit HEX data transmission capability to the receiver. The ability of the system mileage in the process of data transfer shorter if applied indoors. Distance of 1-60 meters with a time of 2m.29s.39ms - 60ms.2m.34s produce good quality images. At a distance of 80 meters with a time of 1m.25s.59ms produce poor images, and with a distance of 90 meters with a time 0m.35s.49ms produce images that are very less . While the distance of > 100 system not able to perform HEX data transmission

Design and Implementation of a High-Speed LVDS Data Acquisition System Based on Virtex-5 FPGA

2014 ◽  
Vol 568-570 ◽  
pp. 193-197
Author(s):  
Qiang Wu ◽  
Gen Wang ◽  
Xu Wen Li
Keyword(s):  
Image Processing ◽  
Data Acquisition ◽  
High Speed ◽  
Image Data ◽  
Image Transmission ◽  
Data Acquisition System ◽  
Frame Rate ◽  
Acquisition System ◽  
Simulation Tools ◽  
Impedance Calculation

A High-Speed LVDS Data Acquisition system is designed, with XILINX’s Virtex-5 FPGA as core processor as well as TI’s TMS320C6748 DSP for pre-processing and storing data. This system achieved a greater amount of image processing and faster image processing requirement. The system completed the dual LVDS image data acquisition according to the demand. The resolution of the image data is 320x257. Each image transmission frame rate of not less than 150 / sec. large amount of data throughout the system as well as real-time demanding is a big challenge for designer. The designer uses simulation tools from Mentor Graphics Hyperlynx to complete the stack and impedance calculation and signal quality simulation to ensure that the system is stable and reliable. This system also has better scalability and more reliable storage method than past designs. Recently, the system has completed testing verification and results show that this design is feasible and reliable.

scholarly journals Real-Time Image Transmission Algorithm in WSN with Limited Bandwidth

2018 ◽  
Vol 14 (12) ◽  
pp. 57
Author(s):  
Hui Huang ◽  
Zhe Li
Keyword(s):  
Real Time ◽  
Data Transmission ◽  
Network Architecture ◽  
Monitoring Network ◽  
Image Data ◽  
Image Transmission ◽  
Time Data ◽  
Limited Bandwidth ◽  
Real Time Image ◽  
Time Image

In this paper, a real-time image transmission algorithm in WSN with limited bandwidth networks is studied. Firstly, a simple and effective monitoring network architecture is established, which allows multiple video monitoring nodes to access the network, and the data transmission is controlled by the synchronization mechanism without collision. Then, the image data is compressed locally at the monitoring nodes (over 85%), so that the image of each node can meet the needs of real-time data transmission, and the overall power consumption of the system is greatly reduced. Finally, based on NVIDIA TX1, four test nodes are constructed to test the algorithm cumulatively, which verifies the effectiveness of the system framework and compression algorithm.

Research on 3D Modeling System Based on Binocular Vision Image Acquisition

2013 ◽  
Vol 385-386 ◽  
pp. 640-643
Author(s):  
Jing Zhang ◽  
Ru Gao ◽  
Chun Yan Liu ◽  
Ya Wei Zhao
Keyword(s):  
Image Processing ◽  
Image Acquisition ◽  
Three Dimensional ◽  
Image Data ◽  
Scanning System ◽  
Two Dimensional ◽  
Dimensional Image ◽  
Two Dimensional Image ◽  
Three Dimensional Modeling ◽  
Ccd Sensor

Three-dimensional modeling of the image acquisition system based on binocular computer vision scanning system scene with MCU processing the two-dimensional image data collected by the CCD sensor, and complete the image binarization processing using hardware, to improve the efficiency of the image processing; using timing delay analysis circuit the edge of the identification image characteristics, the data amount of the compression of the image processing; will be collected by the CCD sensor the two-dimensional image data transmission to a computer, thereby effectively shortening the transmission time of the data.

Wireless Image Transmission System

2013 ◽  
Vol 336-338 ◽  
pp. 1661-1664 ◽  
Author(s):  
Ke Mei Sun
Keyword(s):  
Data Transmission ◽  
High Speed ◽  
Low Cost ◽  
Image Data ◽  
Image Transmission ◽  
Transmission System ◽  
Electric Power System ◽  
Video Monitor ◽  
Sending Module ◽  
Wireless Image Transmission

A wireless image transmission system is proposed, which in order to offset the disadvantages of wire video monitor laying points hard, and disadvantages of wire video monitor implementing hard in bad circumstance. The core of the system is TI series of C5000 high speed DSP processor and radio frequency wireless communication chip. Through DSP transplantation of JPEG compression algorithm, complete image collection and image compression through DSP, use wireless receiving and sending module to complete wireless images data transmission. Use wireless receiving and sending module instead of emitter and network as image data transmission device, low cost, not required network fee, system can real-time complete terminal images collection and show. It can apply community guard and video monitor of deploying points urgently in the electric power system, factory, bank and other important department, which dont require higher performance.

Research and Design of Image Acquisition System Using USB2.0 Interface

2013 ◽  
Vol 347-350 ◽  
pp. 1594-1597
Author(s):  
Jin Hai Zhang
Keyword(s):  
Image Processing ◽  
High Speed ◽  
Image Acquisition ◽  
Image Data ◽  
Acquisition System ◽  
Computer Interface ◽  
Processing Technologies ◽  
Acquisition Device ◽  
Image Acquisition System ◽  
Research And Design

Image acquisition is to study an image acquisition, transmission and storage of information, is the basis of image processing technologies. Currently most of the image acquisition device through the computer interface in the image data into the computer, with high speed and large storage capacity of the computer complete the image acquisition. Traditional computer interface in image processing of data if there is a problem such as high cost, inconvenience, in response to this situation, this paper proposes a USB2.0 interface technology of image acquisition system programme.

An alumina rotary kiln monitoring system based on flame image processing

2018 ◽  
Vol 41 (10) ◽  
pp. 2764-2771
Author(s):  
Chaoqun Lin ◽  
Zhengming Yi ◽  
Zhiwei Jiang
Keyword(s):  
Image Processing ◽  
Rotary Kiln ◽  
Image Acquisition ◽  
Image Data ◽  
Processing Method ◽  
Sintering Process ◽  
Combustion Condition ◽  
Operational Optimization ◽  
Image Acquisition System ◽  
Rotary Kilns

In order to monitor the combustion condition and improve the product material quality, a digital image acquisition and processing method is adopted in alumina-sintering process. Two digital properties of flame grade and material grade are obtained by image data analyzing and smooth filtering, which provide reliable reference for operational optimization and automatic control of rotary kilns. This image acquisition system improves the operation of kiln effectively and reduces the working intensity and the manufacture cost.

Sign in / Sign up

Export Citation Format

Share Document