Fabrication and Characterization of Facilitated Transport Membrane for Gas Separation

2014 ◽  
Vol 625 ◽  
pp. 533-536 ◽  
Author(s):  
Rizwan Nasir ◽  
Hilmi Mukhtar ◽  
Zakaria Man
Keyword(s):  
Gas Separation ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
Membrane Material ◽  
Solvent Evaporation Method ◽  
Thermo Gravimetric ◽  
Gas Separation Membrane ◽  
Separation Membrane ◽  
Fabrication And Characterization

The new membrane material containing facilitate transport medium to enhance the performance of gas separation membrane has been fabricated by using monoethanolamine (MEA) as a fixed carrier with different concentration (5 & 10 wt. %) by using the solvent evaporation method. The developed membranes were characterized by using Field Emission Electron Microscope (FESEM), Fourier Transform Infrared (FTIR), and Thermo-Gravimetric Analysis (TGA). The developed membranes were found nonporous and dense in structure.

Fabrication and characterization of novel highly transparent and organo-soluble poly(ether imide)s thin film for gas separation

2015 ◽  
Vol 39 (6) ◽  
pp. 4478-4487 ◽  
Author(s):  
Mohammad Dinari ◽  
Hashem Ahmadizadegan ◽  
Parvin Asadi
Keyword(s):  
Thin Film ◽  
Gas Separation ◽  
High Performance ◽  
Solution Casting ◽  
Gas Separation Membrane ◽  
Good Solubility ◽  
Separation Membrane ◽  
Fabrication And Characterization ◽  
Soluble Poly

New poly(ether imide)s with good solubility, film quality and thermal stability were synthesis for high-performance gas separation membrane by solution-casting.

Coordination Compounds of Some 3d-Transition Metal Ions with N1-[4-(4-bromo-phenylsulfonyl)-benzoyl]-N4-(4-methoxyphenyl)- thiosemicarbazide

2008 ◽  
Vol 59 (7) ◽  
Author(s):  
Madalina Angelusiu ◽  
Maria Negoiu ◽  
Stefania-Felicia Barbuceanu ◽  
Tudor Rosu
Keyword(s):  
Coordination Compounds ◽  
Magnetic Moments ◽  
Thermo Gravimetric Analysis ◽  
Electronic Spectroscopy ◽  
Transition Metal Ions ◽  
Synthesis And Characterization ◽  
Gravimetric Analysis ◽  
Thermo Gravimetric ◽  
New Compounds

The paper presents the synthesis and characterization of Cu(II), Co(II), Ni(II), Cd(II), Zn(II) and Hg(II) complexes with N1-[4-(4-bromo-phenylsulfonyl)-benzoyl]-N4-(4-methoxyphenyl)-thiosemicarbazide. The new compounds were characterized by IR, EPR, electronic spectroscopy, magnetic moments, thermo-gravimetric analysis and elemental analysis.

Preparation and characterization of a polyethersulfone/polyaniline nanocomposite membrane for ultrafiltration and as a substrate for a gas separation membrane

RSC Advances ◽  
2015 ◽  
Vol 5 (34) ◽  
pp. 27211-27223 ◽  
Author(s):  
Shu Zhu ◽  
Mengqi Shi ◽  
Song Zhao ◽  
Zhi Wang ◽  
Jixiao Wang ◽  
...  
Keyword(s):  
Gas Separation ◽  
Woven Fabrics ◽  
Nanocomposite Membrane ◽  
Selective Layer ◽  
Gas Separation Membrane ◽  
Supported Membrane ◽  
Suitable Substrate ◽  
Separation Membrane ◽  
Polyaniline Nanocomposite

PES/PANI nanocomposite membrane displayed excellent flux and antifouling property for UF. Meanwhile, PES/PANI non-woven fabrics supported membrane performed as a suitable substrate for gas separation membrane with PVAm selective layer.

Synthesis and Characterization of the Bismaleimides Containing Aliphatic-ether Chain for Microelectronics Application

e-Polymers ◽  
2006 ◽  
Vol 6 (1) ◽  
Author(s):  
J. L. Feng ◽  
C. Y. Yue ◽  
K. S. Chian
Keyword(s):  
Chain Length ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Thermo Gravimetric ◽  
Degradation Temperature ◽  
Dielectric Thermal Analysis ◽  
Aliphatic Ether ◽  
Synthetic Reaction

AbstractThis project aims to develop and characterize a series of bismaleimide (BMI) polymers based on maleic anhydride and aliphatic-ether diamines. The effects of varying the chain length of aliphatic-ether diamines on the resultant bismaleimide systems were evaluated so that their suitability for microelectronics applications could be evaluated. The synthetic reaction and properties of the bismaleimide materials were investigated using Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), Thermo- Gravimetric Analysis (TGA), Dielectric Thermal Analysis (DEA) and rheometry. Results showed that thermal, dielectric and rheological properties were all affected by the main chain length of BMI. The magnitude of the dielectric constant at 100 kHz increases with the increasing chain length. The curing peak temperature, curing heat and degradation temperature of BMI, all decrease with the increasing chain length.

Preparation of polyphenylsulfone containing imidazole group for gas separation membrane material

2014 ◽  
Vol 26 (4) ◽  
pp. 401-407 ◽  
Author(s):  
Yunwu Yu ◽  
Baijun Liu ◽  
Yan Wang ◽  
Siyuan Liu ◽  
Xiaobai Li ◽  
...  
Keyword(s):  
Gas Separation ◽  
Membrane Material ◽  
Gas Separation Membrane ◽  
Imidazole Group ◽  
Separation Membrane

scholarly journals Characterization for the necessity of thermophilic biogas digester of tea waste and cooked waste for biogas production

2020 ◽  
Vol 9 (3) ◽  
pp. 159
Author(s):  
Nirmal Halder
Keyword(s):  
Morphological Analysis ◽  
Biogas Production ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
Thermo Gravimetric ◽  
Tea Waste ◽  
Thermophilic Digestion ◽  
First Time ◽  
Novel Design

<p><span>Characterization of tea waste, cooked waste has been done by various authors but for the first time it has been done for understanding the necessity of thermophilic digestion. And for this kind of digestion takes place in thermophilic digester for efficient biogas production. Detailed morphological analysis of feedstock has been determined. In the present study, thermo gravimetric analysis carried out For easy and fast digestion of cooked waste, a novel design of thermophilic digester is proposed and tested.</span></p>

Research on the Basic Properties of the Bamboo Charcoal Bonded Grinding Wheel

2009 ◽  
Vol 416 ◽  
pp. 416-420 ◽  
Author(s):  
Wei Li ◽  
Zhi Yang Song ◽  
Tian Ming Yu ◽  
Bao Gong Geng
Keyword(s):  
Phenolic Resin ◽  
Resin Composite ◽  
Thermo Gravimetric Analysis ◽  
Grinding Wheel ◽  
Gravimetric Analysis ◽  
Bamboo Charcoal ◽  
X Ray Diffraction ◽  
Thermo Gravimetric ◽  
New Material

A new BCB (Bamboo Charcoal Bonded) grinding wheel was developed by bamboo charcoal-phenolic resin composite under vacuum for ELID grinding technology. The pyrolysis behavior of the new bamboo charcoal-phenolic resin material was studied by thermo gravimetric analysis (TGA), and structural characterization of the new material was performed by scanning electron microscopy (SEM), X-ray diffraction (XRD), the friction characteristics was also investigated in this paper.

Optically active polymer: synthesis and characterization of new optically active poly (hydrazide-imide)s incorporating L- leucine

e-Polymers ◽  
2007 ◽  
Vol 7 (1) ◽  
Author(s):  
Abdol Reza Hajipour ◽  
Saeed Zahmatkesh ◽  
Arnold E. Ruoho
Keyword(s):  
Thermo Gravimetric Analysis ◽  
Specific Rotation ◽  
Optically Active ◽  
Gravimetric Analysis ◽  
Optically Active Polymer ◽  
Scanning Calorimetry ◽  
Thermo Gravimetric ◽  
Good Thermal Stability ◽  
H Nmr

AbstractThis paper deals with the polycondensation between a chiral diacyl chloride (N,N′-Pyromelliticdiimido-di-L-leucine chloride) and six different dihydrazides. The corresponding poly (hydrazide-imide)s which have been obtained in quantitative yields are moderately soluble in polar aprotic solvents, have good thermal stability and optical activity. The synthetic compounds have been characterized by IR, UV and 1H NMR spectroscopy, elemental analysis and specific rotation. The thermal properties of the polymers (10 and 15) have been studied by thermo gravimetric analysis (TGA) and differential scanning calorimetry (DSC).

Sign in / Sign up

Export Citation Format

Share Document