Numerical Simulation of Temperature Field in Laser Remanufacturing

2014 ◽  
Vol 633-634 ◽  
pp. 845-849
Author(s):  
Ling Dong ◽  
Xi Chen Yang ◽  
Yun Shan Wang ◽  
Jian Bo Lei
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Temperature Field ◽  
Theoretical Model ◽  
Temperature Distribution ◽  
Simulation Method ◽  
Temperature Fields ◽  
Simulation Results

It plays an important role in guiding laser remanufacturing process and process control to research temperature field of laser remanufacturing. A numerical simulation method of temperature field based on MATLAB PDE Tool is proposed. Theoretical model of temperature field is presented. The temperature fields at different times are calculated and simulated with finite element method and MATLAB software with PDE Toolbox. The results show that this method can accurately calculate the temperature distribution of the laser remanufacturing process. The simulation results are helpful to optimize process parameters and to improve the quality of laser remanufacturing.

The Numerical Simulation of Effective Elastic Response for WC-Co Cemented Carbide

2015 ◽  
Vol 1096 ◽  
pp. 417-421
Author(s):  
Pei Luan Li ◽  
Zi Qian Huang
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Theoretical Model ◽  
Material Properties ◽  
Cemented Carbide ◽  
Elastic Response ◽  
The Finite Element Method ◽  
Simulation Results ◽  
Element Method

By the use of finite element method, this paper predicts the effects of the shapes of reinforcements with different ductility (Co) on the effective elastic response for WC-Co cemented carbide. This paper conducts a comparative study on the material properties obtained through theoretical model, numerical simulation and experimental observations. Simulation results indicate that the finite element method is more sophisticated than the theoretical prediction.

The Finite Element Numerical Simulation of the Temperature Distribution of the Glass that under the Irradiation of Laser

2013 ◽  
Vol 791-793 ◽  
pp. 411-414
Author(s):  
Tuan Jie Liu ◽  
Ning Shan ◽  
Yong Zhong Ma
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Temperature Field ◽  
Temperature Distribution ◽  
Interaction Mechanism ◽  
The Finite Element Method ◽  
Co Laser ◽  
Action Time ◽  
Finite Element Numerical Simulation

The temperature field is an important aspect to study the interaction mechanism between the laser and glass. The temperature distribution on the surface of the glass that illuminated by the CO laser is numerical simulated by using the finite element method. The change of the temperature field of the target, irradiated by the laser in different time or different power, is simulated respectively, get the curve of the temperature field which reflects the temperature at the center spot changing with the action time and power.

The Research on Steering Fracture Numerical Simulation

2013 ◽  
Vol 734-737 ◽  
pp. 1488-1492
Author(s):  
Zhen Yu Liu ◽  
Li Hong Yao ◽  
Hu Zhen Wang ◽  
Cui Cui Ye
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Three Dimensional ◽  
Simulation Method ◽  
Production Performance ◽  
Phase Flow ◽  
Water Production ◽  
Two Phase ◽  
Fractured Well

The fractures after artificial steering fracturing appear in shades of curved surface. Aiming at the problem of steering fracture, in the paper, numerical simulation method under the condition of three-dimensional two-phase flow is presented based on finite element method. In this method, of steering fracture was achieved by adopting surface elements fractures and tetrahedron elements to describe formation. By numerical simulation, the change rule of oil and water production performance of steering fractures can be calculated, and then the steering fracture parameters can be optimized before fracturing. A new method was supplied for the numerical simulation of artificial fractured well.

A study of azimuthal electromagnetic wave LWD based on self-adaptive hp finite element method

2018 ◽  
Vol 32 (34n36) ◽  
pp. 1840073
Author(s):  
Hui Li ◽  
Yi-Bo Jiang ◽  
Jian-Wen Cai
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Electromagnetic Wave ◽  
Real Time ◽  
Simulation Results ◽  
Peak Value ◽  
Element Method ◽  
Self Adaptive ◽  
Hp Finite Element

Azimuthal electromagnetic wave logging-while-drilling (LWD) technology can detect weak electromagnetic wave signal and realize real-time resistivity imaging. It has great values to reduce drilling cost and increase drilling rate. In this paper, self-adaptive hp finite element method (FEM) has been used to study the azimuthal resistivity LWD responses in different conditions. Numerical simulation results show that amplitude attenuation and phase shift of directional electromagnetic wave signals are closely related to induced magnetic field and azimuthal angle. The peak value and polarity of geological guidance signals can be used to distinguish reservoir interface and achieve real-time geosteering drilling. Numerical simulation results also show the accuracy of the self-adaptive hp FEM and provide physical interpretation of peak value and polarity of the geological guidance signals.

Numerical Simulation on Hydrogen Dispersion in Automobiles due to Storage Cylinder Failure

2011 ◽  
Author(s):  
Yan-Lei Liu ◽  
Jin-Yang Zheng ◽  
Shu-Xin Han ◽  
Yong-Zhi Zhao
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Numerical Model ◽  
Hydrogen Sensor ◽  
High Concentration ◽  
Concentration Region ◽  
Species Transport ◽  
Safety Design ◽  
Simulation Results

A numerical model for dispersion of hydrogen in hydrogen powered automobiles was established basing on finite element method with species transport and reaction module of FLUENT. And corresponding numerical simulations were done in order to analysis the dispersion of hydrogen due to leakage from different position of the storage cylinder on the automobiles. Also, the distribution of the hazard region due to hydrogen dispersion was obtained. The simulation results show that the baffle above the cylinder can accumulate the hydrogen. Therefore, the high concentration region of hydrogen exists near the baffle. The study can provide reference for hydrogen sensor placement and safety design of hydrogen powered automobiles.

Temperature distribution simulations during electron beam freeform fabrication process based on the fully threaded tree

2019 ◽  
Vol 25 (6) ◽  
pp. 989-997
Author(s):  
Yajun Yin ◽  
Wei Duan ◽  
Kai Wu ◽  
Yangdong Li ◽  
Jianxin Zhou ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Temperature Field ◽  
Electron Beam ◽  
Additive Manufacturing ◽  
Temperature Distribution ◽  
Design Methodology ◽  
Content Type ◽  
Freeform Fabrication ◽  
Simulation Based ◽  
Simulation Results

Purpose The purpose of this study is to simulate the temperature distribution during an electron beam freeform fabrication (EBF3) process based on a fully threaded tree (FTT) technique in various scales and to analyze the temperature variation with time in different regions of the part. Design/methodology/approach This study presented a revised model for the temperature simulation in the EBF3 process. The FTT technique was then adopted as an adaptive grid strategy in the simulation. Based on the simulation results, an analysis regarding the temperature distribution of a circular deposit and substrate was performed. Findings The FTT technique was successfully adopted in the simulation of the temperature field during the EBF3 process. The temperature bands and oscillating temperature curves appeared in the deposit and substrate. Originality/value The FTT technique was introduced into the numerical simulation of an additive manufacturing process. The efficiency of the process was improved, and the FTT technique was convenient for the 3D simulations and multi-pass deposits.

Numerical Simulation of Cathode Erosion in EDM Process

2012 ◽  
Vol 462 ◽  
pp. 109-115
Author(s):  
Zhen Long Wang ◽  
Bao Cheng Xie ◽  
Yu Kui Wang ◽  
Wan Sheng Zhao
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Heat Flux ◽  
Finite Element ◽  
Thermal Properties ◽  
Temperature Distribution ◽  
Material Removal ◽  
Cathode Erosion ◽  
Gauss Distribution ◽  
Edm Process

A numerical model of cathode erosion in EDM process using finite element method is presented. Using this model, numerical simulation of the single spark of EDM process has been carried out with parameters such as conduction, convection, the latent heat of phase change, thermal properties of material with temperature and gauss distribution of heat flux to predict the temperature distribution in the discharge point of cathode as a result of single discharges in EDM process. The simulation result shows the trend of dynamic temperature distribution of heat -affected zone and well explains mechanism of material removal in EDM process.

Numerical Simulation Analysis of the Groundwater’ Temperature Field in the Concentration Area of the Water Source Heat Pump Engineering

2012 ◽  
Vol 174-177 ◽  
pp. 3027-3030
Author(s):  
Wei Wei ◽  
Ming Zhong Wang ◽  
Jun Pan
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Temperature Field ◽  
Numerical Model ◽  
Heat Pump ◽  
Simulation Analysis ◽  
Water Source ◽  
Groundwater Temperature ◽  
Change Trend

In order to avoid the heat transfixion among users in the concentration area of the water source heat pump, a suitable layout of pumps for drawing and recharging wells is required. Finite element method is adopted to establish the numerical model of groundwater temperature to predict the change trend of water temperature. The results of the simulation indicate that the groundwater temperature change from 6.3 to 14.2 °C in winter, and from 11.5 to 21.2 °C in summer. These results meet the requirements of the drawing and recharging water in the water source heat pump engineering and are able to avoid the heat transfixion among users. The effect of drawing and recharging water in the water source heat pump engineering to the changes of the groundwater’s temperature field can be analyzed quantitatively through establishing the proper numerical simulation which provides a reference to scientifically design the layout of pumps for drawing and recharging water.

Numerical Simulation of Fracture Process of Concrete Dam due to Freezing and Thawing with Finite Element Method

2007 ◽  
Vol 348-349 ◽  
pp. 941-944
Author(s):  
Li Juan Cao ◽  
Shou Ju Li ◽  
Zi Chang Shangguan
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Thermal Stress ◽  
Cold Climate ◽  
Temperature Fields ◽  
Stress Fields ◽  
Freezing And Thawing ◽  
Concrete Dam ◽  
Element Method

Freezing and thawing damage is one of the major problems of concrete dams in cold climate. Cracking and splitting are the most common results of freezing and thawing deterioration in concrete dam. The cracking problem owing to freezing and thawing was investigated by making sue of finite element methods. The interpretation of the mechanism of failure was also given. In order to compute the thermal stress fields of concrete dam caused by freezing and thawing, the temperature changes versus seasons is determined according to measured data. The temperature fields of concrete dam versus seasons are simulated by using finite element method. Basing on the computational results of the temperature fields of concrete dam, the thermal stress fields are calculated numerically. The researches show that the first principal stress of concrete dam at downstream surface can exceed the tensile strength of concrete material. The numerical simulation results of fractured regions of concrete dam agreed with practical observed data.

Sign in / Sign up

Export Citation Format

Share Document