Finite Element Analysis of Wind Vibration Control Effect for Single Transmission Tower

2014 ◽  
Vol 670-671 ◽  
pp. 1116-1120
Author(s):  
Wen Ping Xie ◽  
Dong Zhou Xia ◽  
Wei Jun Yang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Vibration Control ◽  
Practical Significance ◽  
Engineering Practice ◽  
Transmission Tower ◽  
Analysis Model ◽  
Control Effect ◽  
Element Analysis ◽  
Wind Vibration

Three-dimensional finite element analysis model of transmission tower is established by using ANSYS software. According to the characteristics of the tower, wind vibration control effect of transmission tower is to be studied through seven different kinds of distribution of MR dampers condition, then get the dynamic response in different position of the tower body and tower top. The analysis results show that:: Through using of different damper layout, it can reduce vibration of the tower, especially the third scheme which is tower head lower half part edge member bar plus dampers had the most significant vibration reduction effect. Research results can be reference for engineering design and engineering practice, it also has a certain theoretical and practical significance.

The Study of Sheer Lag Effect by the Influence of Strengthened Story

2013 ◽  
Vol 788 ◽  
pp. 511-515
Author(s):  
Shuai Ma ◽  
Fu Ma
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Linear Analysis ◽  
Structure Design ◽  
Practical Significance ◽  
Analysis Model ◽  
Element Analysis ◽  
Finite Element Analysis Model ◽  
Lag Effect ◽  
Strengthened Story

In this paper,a brief and effective finite element analysis model is established though using the ETABS.The influence of strengthened story’s quantity and location to the Sheer Lag Effect through the elastic linear analysis was researched.The variation of the Sheer Lag Effect in the process of the changing quantity and location of strengthened story and so on are discussed.The influence relation of strengthened story by the Sheer Lag Effect is analyzed,which has the important practical significance to reality structure design.

Modeling and experimental verification on directivity of an electret cell array loudspeaker

2012 ◽  
Vol 24 (3) ◽  
pp. 326-333 ◽  
Author(s):  
Yu-Chi Chen ◽  
Wen-Ching Ko ◽  
Han-Lung Chen ◽  
Hsu-Ching Liao ◽  
Wen-Jong Wu ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Digital Control System ◽  
Analysis Model ◽  
Cell Array ◽  
Element Analysis ◽  
Finite Element Analysis Model ◽  
The Finite Element Analysis ◽  
Directivity Characteristics

We propose a model to give us a method to investigate the characteristic three-dimensional directivity in an arbitrarily configured flexible electret-based loudspeaker. In recent years, novel electret loudspeakers have attracted much interest due to their being lightweight, paper thin, and possessing excellent mid- to high-frequency responses. Increasing or decreasing the directivity of an electret loudspeaker makes it excellent for adoption to many applications, especially for directing sound to a particular area or specific audio location. Herein, we detail a novel electret loudspeaker that possesses various directivities and is based on various structures of spacers instead of having to use multichannel amplifiers and a complicated digital control system. In order to study the directivity of an electret loudspeaker based on an array structure which can be adopted for various applications, the horizontal and vertical polar directivity characteristics as a function of frequency were simulated by a finite-element analysis model. To validate the finite-element analysis model, the beam pattern of the electret loudspeaker was measured in an anechoic room. Both the simulated and experimental results are detailed in this article to validate the various assertions related to the directivity of electret cell-based smart speakers.

Finite Element Analysis of Main Stand of Ф140 Pipe Rolling Mill and Split Casting

2013 ◽  
Vol 690-693 ◽  
pp. 2327-2330
Author(s):  
Ming Bo Han ◽  
Li Fei Sun
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Rolling Mill ◽  
Analysis Model ◽  
Element Analysis ◽  
Pipe Rolling ◽  
Full Load ◽  
Finite Element Software ◽  
Theoretical Position ◽  
Technical Requirements

By using finite element software, the paper establishes the main stand analysis model of the Ф140 pipe rolling mill and provides the model analysis of main stand in cases of full load. Verify the design of main stand fully comply with the technical requirements .In this paper, it provides the theoretical position of split casting and welding method using electric slag welding.

Finite Element Analysis for the Collapse Accident of a 110kV Transmission Tower

2014 ◽  
Vol 986-987 ◽  
pp. 927-930
Author(s):  
Yi Zhu ◽  
Bo Li ◽  
Hao Wang ◽  
Kun Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cross Section ◽  
Strong Wind ◽  
Transmission Tower ◽  
Element Analysis ◽  
Straight Line ◽  
The Finite Element Analysis

Put the finite element analysis of line tower coupling modeling to the collapse of a 110 kV line straight-line tower, study the effect of strong wind on transmission tower and wire. The results show that under the action of strong wind, the material specification selected by the part of the rods on the type of tower is lower, cross section is smaller, the principal material of tower will be instable and flexional under the compression, resulting in tower collapsed.

Wear analysis of eco-friendly non-asbestos friction-lining material applied in an automotive drum brake: Experimental and finite-element analysis

2021 ◽  
pp. 135065012110167
Author(s):  
Dinesh Shinde ◽  
Mukesh Bulsara ◽  
Jeet Patil
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Surface Wear ◽  
Analysis Model ◽  
Element Analysis ◽  
Finite Element Analysis Model ◽  
Drum Brake ◽  
Wear Analysis ◽  
Lining Material ◽  
Friction Lining

Brake friction lining material is the critical element of a braking system, since it provides friction resistance to the rotating drum for controlling automobiles. The present study involves wear analysis of newly developed eco-friendly non-asbestos friction lining material for automotive drum brake applications using experimental study, finite-element analysis, and microstructural investigations. Theoretical interpretation of braking force at different automobile speeds was derived using fundamentals. Specimen drum brake liner with eco-friendly material compositions was produced using an industrial hot compression molding process at one of the manufacturer. The surface wear of the liner was measured using an effective and accurate method. Furthermore, a finite-element analysis model was developed considering actual operating conditions and various components of the drum brake system. The model was elaborated for various result outcomes, including Von-Mises stresses and total deformation of components of the drum brake, and further used to estimate the surface wear of the friction lining material in terms of transverse directional deformation. Finally, microstructural analysis of the friction lining material was carried out using scanning electron microscopy and energy dispersive spectroscopy. From the results, it is seen that the developed friction lining material is wear resistant. The finite-element analysis model can be effectively utilized to study the tribological characteristics of friction lining materials.

3D FEA Modeling of Hard Turning

2002 ◽  
Vol 124 (2) ◽  
pp. 189-199 ◽  
Author(s):  
Y. B. Guo ◽  
C. R. Liu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Geometric Model ◽  
Friction Model ◽  
Dominant Factor ◽  
Analysis Model ◽  
Element Analysis ◽  
Plastic Properties ◽  
Fea Model ◽  
Model Predictions

A practical explicit 3D finite element analysis model has been developed and implemented to analyze turning hardened AISI 52100 steels using a PCBN cutting tool. The finite element analysis incorporated the thermo-elastic-plastic properties of the work material in machining. An improved friction model has been proposed to characterize tool-chip interaction with the friction coefficient and shear flow stresses determined by force calibration and material tests, respectively. A geometric model has been established to simulate a 3D turning. FEA Model predictions have reasonable accuracy for chip geometry, forces, residual stresses, and cutting temperatures. FEA model sensitivity analysis indicates that the prediction is consistent using a suitable magnitude of material failure strain for chip separation, the simulation gives reasonable results using the experimentally determined material properties, the proposed friction model is valid and the sticking region on the tool-chip interface is a dominant factor of model predictions.

scholarly journals Finite element analysis of T-joint of mechanical connecting channels

2020 ◽  
Vol 12 (12) ◽  
pp. 168781402097774
Author(s):  
Jiawei Wang ◽  
Fachao Li ◽  
Zibo Chen ◽  
Baishu Li ◽  
Jue Zhu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Rail Transit ◽  
Force Analysis ◽  
Analysis Model ◽  
Element Analysis ◽  
Finite Element Analysis Model ◽  
Before And After ◽  
Design Software

This paper studies the force and deformation of the connecting channel in Ningbo rail transit construction, which firstly used the mechanical shield method. Steel-concrete composite structural segments are used in the T-joint of connecting channel. The cutting part of the segments are replaced by the concrete and fiberglass instead of reinforced concrete. Basing on a variety of three-dimensional design software and ABAQUS finite element analysis software, a refined finite element analysis model of the special segments is established. By considering the influence of curved joint bolts, the force analysis of the special segments under the structural state before and after construction is performed. According to the analysis and comparison of the deformation of the segments with and without the bolts, it is concluded that the steel-concrete segments can withstand the pressure of the soil before and after the construction. Suggestions for the safety of the design and construction of the segments are put forward.

Sign in / Sign up

Export Citation Format

Share Document