Research on the Numerical Simulation of Internal Flow Field and Energy Efficiency of Ventilator

2015 ◽  
Vol 713-715 ◽  
pp. 602-605
Author(s):  
Zhu Jue Tong ◽  
Xiao Ling Wang ◽  
Kai Zhang ◽  
Shu Xing Wu
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Energy Efficiency ◽  
Flow Field ◽  
Three Dimensional ◽  
Internal Flow ◽  
Secondary Flows ◽  
Local Flow ◽  
Gap Flow ◽  
Computational Fluid Dynamics Cfd

In the present study, the effects of ventilator geometries on the its performance were numerically simulated using the computational fluid dynamics (CFD) program. For a certain type ventilator, three-dimensional inner flow field was derived firstly, such as local flow field at the meridional and rotary plane of ventilator, the gap flow between the impeller and air outlet, and the secondary flows in impeller channel were studied in detail, and some suggestions are given to improve the profile of velocity. The above results would be helpful to the optimization and modification of ventilator.

Numerical Simulation and Performance Prediction of Multistage Canned Motor Pump

2016 ◽  
Author(s):  
Bin Xia ◽  
Fan-Yu Kong ◽  
Yuxing Bai ◽  
Xiaohui Duan
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Performance Prediction ◽  
Three Dimensional ◽  
Internal Flow ◽  
Main Flow ◽  
Three Dimensional Model ◽  
Local Flow ◽  
And Performance ◽  
Canned Motor

Due to the advantages of high head and no leakage, multistage canned motor pump is widely used in oil industry, chemical industry, national defense and atomic energy. In order to meet the needs of the market, the multistage canned motor pump is designed. This paper introduced the hydraulic design and structural design. In order to optimizing the performance of the pump, this paper designed and used multistage canned motor pump DBP15–50×8 as the research object. Three-dimensional model of the main flow passage components is built and the mesh is generated respectively by using Pro/E and ICEM software, and we calculated the whole internal flow field of the pump that was selected by using ANSYS CFX14.0 software, achieving the pressure and velocity distribution in the pump and the internal details of flow in impeller and other main flow components. The post-processing showed the fluid in sliding bearing section rotates around the shaft, so the local flow is disorder. The comparison of the performance prediction and the experiment shows that the error is low. The cavitating turbulent flow in the flow field was numerically simulated by using the cavitation model. The cavitation phenomena didn’t occur in the experiments. The condition meets the result of numerical simulation.

Numerical Simulation and Vibration Analysis of Inner Flow Field for Lage-Sized Throttle Valve

2012 ◽  
Vol 233 ◽  
pp. 154-157
Author(s):  
Guo Qin Huang ◽  
Ying He ◽  
Jin Yu
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Flow Field ◽  
Vibration Analysis ◽  
Fluid Velocity ◽  
Three Dimensional ◽  
Control Valve ◽  
Flow Area ◽  
Throttle Valve ◽  
Computational Fluid Dynamics Cfd

Based on the computational fluid dynamics(CFD) technique, the three-dimensional inner flow field of a large-sized throttle valve was built and the dynamics characteristics of the control valve were analyzed. The results indicate that the main reason for the spool and valve vibration was the cavitations at the spool and the whirlpool flow at the outlet of the valve, and the fluid velocity rises as the decreasing of the flow area at the same opening. The research f indings will provide the theory basis for the later throttle valves development and optimization with littler vibration and higher efficiency.

Numerical simulation of three-dimensional airflow in a novel dual-feed rotor spinning box

2016 ◽  
Vol 88 (3) ◽  
pp. 237-253 ◽  
Author(s):  
Nicholus Tayari Akankwasa ◽  
Huiting Lin ◽  
Yuze Zhang ◽  
Jun Wang
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Three Dimensional ◽  
Internal Flow ◽  
Velocity Variation ◽  
Positive Pressure ◽  
Three Dimensional Model ◽  
Air Velocity ◽  
Rotor Spinning ◽  
Pressure Profiles

In order to regulate turbulence strength and determine airflow characteristics in a new dual-feed rotor spinning unit, the internal flow field is investigated. A computational fluid dynamics technique is employed to numerically study the three-dimensional model of the internal airflow in the new design. The effects of air velocity variation on turbulence strength, negative pressure, Re, and wall pressure distribution are investigated based on simulation data and previous studies. The results show that the turbulence strength and Re increased with increase in inlet air velocity. Pressure profiles inside the rotor varied significantly with positive pressure observed at the channel exits. Minimal inlet velocity maintains the flow field in the rotor interior below 100 m/s, which gives the ideal turbulence required to minimize yarn quality deterioration. The dual-feed rotor spinning unit showed more orderly streamline patterns with fewer vortices compared to the conventional one. The numerical simulation can provide insights on airflow studies and some guidelines for future prototyping and experiments to further improve the new design.

Numerical Simulation of Flow Process of Ammonium Persulfate Crystallizer

2014 ◽  
Vol 997 ◽  
pp. 396-400
Author(s):  
Yu Guang Fan ◽  
Ting Wei
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Three Dimensional ◽  
Ammonium Persulfate ◽  
Flow Process ◽  
Calculation Results ◽  
Crystallization Effect ◽  
Computational Fluid Dynamics Cfd ◽  
The Impact ◽  
Selection Of

The method of computational fluid dynamics (CFD) is used to three-dimensional numerical simulation for the fluid flow process of ammonium persulfate crystallizer. By using standard model, this paper respectively simulated the flow field within the crystallizer in the impeller installation height of 1.2 m while stirring speed is of 60 r/min, 100 r/min and 200 r/min; and simulated the impact of the flow field inside the crystallizer when the stirring speed of 100 r/min and impeller installation height respectively is of 0.7 m, 1.2 m and 1.7 m. That calculation results show that: the velocity gradient is mainly concentrated in the area of internal draft tube and paddle around. With the increase of impeller speed, the flow velocity of the fluid within the crystallizer corresponding increases; and the energy also gradually decreases from mixing impeller to the settlement zone with the loss of the installation height, and the kinetic energy in the bottom of the crystallizer is reduced. Considering the energy and crystallization effect, selection of mixing speed of 100 r/min or so and installation height of about 1.2 m is more appropriate.

The Numerical Simulation of the Flow Field in the Underground Hydrocyclone

2013 ◽  
Vol 655-657 ◽  
pp. 470-475
Author(s):  
Jing Chang Wang ◽  
Fu Lai Guo ◽  
Meng Hua Wu
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Field Distribution ◽  
Phase Distribution ◽  
Three Dimensional ◽  
Internal Flow ◽  
No Formation ◽  
The Media ◽  
Solid Liquid ◽  
Air Column

For preventing sand in underground oil, this paper structures a model of hydrocyclone with the inside cyclone and the outside one seriesing and describes how it works. By the TGrid procedures, the all of the hydrocyclone is meshed with the tetrahedral and the boundary conditions are determined. The methods of Three-dimensional numerical simulation in FLUENT are used to simulate the velocity field distribution, the pressure field distribution, the path lines of the separated medition characteristics of the separated medium and the phase distribution of the medium. The affect of the internal separated medition characteristics to the separated performance is analysed. Through the simulation, it is found that the spiral fin in the hydrocyclone can guide the fluid to produce a vortex flow to meet the purpose of separating the solid-liquid. There is no formation of the air column comparing with the conventional cyclone, so the internal flow field is more stable to conductive to the separation of the media. It provides a basis for the improvement of the cyclone.

scholarly journals Numerical investigations on effect of wear-ring clearance on performance of a submersible well pump

2017 ◽  
Vol 9 (7) ◽  
pp. 168781401770415 ◽  
Author(s):  
Weidong Shi ◽  
Xiongfa Gao ◽  
Qihua Zhang ◽  
Desheng Zhang ◽  
Daoxing Ye
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Computational Fluid Dynamics ◽  
Flow Field ◽  
Reverse Flow ◽  
Internal Flow ◽  
Experimental Results ◽  
Ring Size ◽  
Numerical Investigations ◽  
Calculation Results

A typical submersible well pump was investigated in this article. The whole flow field of submersible well pump was numerically simulated by computational fluid dynamics software. The influence of clearance of wear-rings on the external characteristic and internal flow field was analyzed through comparing the calculation results with experimental results. The result of the numerical simulation shows that changing clearance of front wear-ring has a greater impact on pump performances than changing clearance of back wear-ring, and the head and efficiency of pump decrease with the increase in the size of clearance. Especially when the size of clearance is larger than 0.5 mm, decreasing becomes more obvious. When the front and back wear-ring size of the clearance comes to 1.0 mm, the efficiency decreases from the highest point of 75.31% to 65.44% at rated flow, and the head of pump decreases about 3.5 m. When the size of clearance is 0.2 mm, reverse-flow will appear in the front shroud cavity of the impeller, and leakage from back wear-ring through the balance hole into the impeller, which has a little influence on the flow field of the impeller inlet.

Three-Dimensional Numerical Simulation of Fluid with Sparse Particles' Erosion to Pipelines

2013 ◽  
Vol 805-806 ◽  
pp. 1785-1789
Author(s):  
Chang Bin Wang ◽  
Miao Wang ◽  
Xiao Xu Li ◽  
Yu Liu ◽  
Jie Nan Dong
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Flow Model ◽  
Particle Distribution ◽  
Three Dimensional ◽  
Two Phase ◽  
Wear Area ◽  
Computational Fluid Dynamics Cfd ◽  
Set Up ◽  
Volume Method

A three dimensional fluid flow model was set up in this paper, based on the computational fluid dynamics (CFD) and the elasticity theory. Using the finite volume method, a 120° bend was taken as a research object to simulate the erosion to the wall of fluid with sparse particles, finally, to determine the most severe wear areas.At the same time, the distribution of two-phase flows pressure and velocity was analyzed in 45° and 90° bends, then tracked the trajectory of the particles. The results show that the 90°bend has the smallest wear area and particle distribution or combination property is the best.

Flow Analysis of Melted Urea in a Perforated Rotating Bucket

2013 ◽  
Vol 372 ◽  
pp. 340-345 ◽  
Author(s):  
Aadil Muhammad ◽  
Nejat Rahmanian ◽  
Rajashekhar Pendyala
Keyword(s):  
Fluid Dynamics ◽  
Mass Transfer ◽  
Flow Field ◽  
Flow Analysis ◽  
Internal Flow ◽  
Geometrical Model ◽  
Transfer Performance ◽  
Computational Fluid Dynamics Cfd ◽  
Rotating Bucket ◽  
Comprehensive Study

A comprehensive study of the internal flow field for the prilling application in a perforated rotating bucket has been carried out. Computational Fluid Dynamics (CFD) is used to investigate the flow field of urea melt inside the perforated rotating bucket. The bucket is mounted at the top of the prilling tower. In prilling process, urea melt is sprayed by the perforated rotating bucket to produce the urea droplets, which falls down due to gravity. These drops fall down through a cooling medium and solidify into prills. The velocity field in the bucket is very important to study, as it has great effect on the heat and mass transfer performance in prilling process. ANSYS 14.0 CFD package is used to simulate and Design Modeler and Catia V5 are used for geometrical model of the perforated prilling bucket. Velocity distribution on different planes are obtained and discussed.

A Numerical Study of Flow Field in a Hydrocyclone for Potash Ore Desliming

2013 ◽  
Vol 448-453 ◽  
pp. 3847-3850
Author(s):  
Da Li ◽  
Fang Qin Cheng ◽  
Jian Feng Li ◽  
Yun Shan Guan
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Computational Fluid Dynamics ◽  
Flow Field ◽  
Numerical Study ◽  
Numerical Approach ◽  
Basic Information ◽  
Feed Composition ◽  
Accurate Design ◽  
Computational Fluid Dynamics Cfd

Despite the widespread use of hydrocyclone in the process of potash ore desliming, its accurate design is often difficult because the feed composition is complicated and the viscosity is high in the brine system. In this study, a numerical approach based on computational fluid dynamics (CFD) was performed to describe the flow field. The numerical simulation of flow pattern in hydrocyclones for potash ore desliming was presented. Some basic information concerning the velocity and pressure distribution is given, and the results can be used as the fundamental basis for its design.

Numerical Simulation of Aerodynamic Performances of Wet Compression Compressor Cascade

2006 ◽  
Author(s):  
Qun Zheng ◽  
Yan Shao ◽  
Yinyong Zhang
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Droplet Diameter ◽  
Three Dimensional ◽  
Internal Flow ◽  
Compressor Cascade ◽  
Field Simulation ◽  
Aerodynamic Performances ◽  
Wet Compression ◽  
Two Phases

The thermodynamic analyses and actual applications of wet compression have demonstrated its benefits for power augment. An aerodynamic flow field simulation of the wet compression compressor cascade can give more information about the cascade internal flow patterns. In this paper, a stage of wet compression compressor is simulated with computational fluid dynamics software. Three dimensional, two phases flows are numerically investigated under different water injected amount, different water droplet diameter etc. The CFD results present the details of wet compression compressor cascade flows. And the flow fields of wet compression are compared with those of dry compression.

Sign in / Sign up

Export Citation Format

Share Document