The Implementation of Skyhook Control for Semi-Active Suspension Based on Vi-CarRealTime

2015 ◽  
Vol 713-715 ◽  
pp. 748-751 ◽  
Author(s):  
Bo Wei Bi ◽  
Fang Xiao
Keyword(s):  
Control Strategy ◽  
Ride Comfort ◽  
Active Suspension ◽  
Vehicle Model ◽  
Control Range ◽  
Control Signals ◽  
Suspension Control ◽  
Automobile Suspension ◽  
Simulation Results ◽  
Damper Control

The research of semi active suspension control strategy once was a hot point in the field of automobile suspension [2, 3], but it is difficult to achieve for most of them. I choose VI-CarRealTime to build vehicle model based on ADAMS vehicle model. Kalman Filter designed based on 1/2 vehicle model supply control signals for controller. Considering characteristics of CDC damper, Skyhook control strategy is applied for simulation, the simulation results show that, Skyhook Control can improve vehicle ride comfort in CDC damper control range.

Comprehensive Analysis for Influence of Controllable Damper Time Delay on Semi-Active Suspension Control Strategies

2017 ◽  
Vol 139 (3) ◽  
Author(s):  
Yechen Qin ◽  
Feng Zhao ◽  
Zhenfeng Wang ◽  
Liang Gu ◽  
Mingming Dong
Keyword(s):  
Time Delay ◽  
Dynamic Characteristics ◽  
Ride Comfort ◽  
Hybrid Control ◽  
Sliding Mode ◽  
Control Strategies ◽  
Active Suspension ◽  
Test System ◽  
Suspension Control ◽  
Simulation Results

This paper presents a comprehensive comparison and analysis for the effect of time delay on the five most representative semi-active suspension control strategies, and refers to four unsolved problems related to semi-active suspension performance and delay mechanism that existed. Dynamic characteristics of a commercially available continuous damping control (CDC) damper were first studied, and a material test system (MTS) load frame was used to depict the velocity-force map for a CDC damper. Both inverse and boundary models were developed to determine dynamic characteristics of the damper. In addition, in order for an improper damper delay of the form t+τ to be corrected, a delay mechanism of controllable damper was discussed in detail. Numerical simulation for five control strategies, i.e., modified skyhook control SC, hybrid control (HC), COC, model reference sliding mode control (MRSMC), and integrated error neuro control (IENC), with three different time delays: 5 ms, 10 ms, and 15 ms was performed. Simulation results displayed that by changing control weights/variables, performance of all five control strategies varied from being ride comfort oriented to being road handling oriented. Furthermore, increase in delay time resulted in deterioration of both ride comfort and road handling. Specifically, ride comfort was affected more than road handling. The answers to all four questions were finally provided according to simulation results.

Based on Single Neuron PID Control of Vehicle Active Suspension System

2013 ◽  
Vol 380-384 ◽  
pp. 528-531 ◽  
Author(s):  
Xiao Feng Liu ◽  
Xin Hua Xie
Keyword(s):  
Control Strategy ◽  
Pid Control ◽  
Single Neuron ◽  
Ride Comfort ◽  
Control Strategies ◽  
Active Suspension ◽  
Vital Role ◽  
Suspension System ◽  
Suspension Control ◽  
Single Neuron Pid

Relative to the passive suspension, automotive active suspension car driving more ride comfort and stability, has a vital role to further improve the performance of the vehicle. For such a typically complex active suspension system research, the key issue is the selection of control strategies. The problems in the currently active suspension control strategy, the principle of a simple, effective, this paper, a single neuron PID control strategy used in the automotive active suspension system. The results show that compared with other control strategies, single neuron PID control strategy is reliable, has more advantages.

Study on a Control Method Used in the Semi-Active Suspension

2011 ◽  
Vol 128-129 ◽  
pp. 1025-1030
Author(s):  
Yun Tang Zhao ◽  
Si Zhong Chen ◽  
Zhan Zong Feng
Keyword(s):  
Control Strategy ◽  
Ride Comfort ◽  
Control Method ◽  
Active Suspension ◽  
The Other ◽  
Isolation Effect ◽  
Suspension Spring ◽  
Simulation Results ◽  
Active Damper ◽  
The Ideal

A new control method used in the semi-active suspension is studied. The force generated by the semi-active damper can be divided into two parts, one is the uncontrollable force, and the other is the controllable force. In order to make the sprung mass have the ideal isolation effect, the controllable force should be equal to the sum of the uncontrollable force and the force generated by the suspension spring. But the controllable force is limited by many constraints. Therefore, the control strategy can be concluded. The simulation results show that the ride comfort and handling stability are both improved by the control method.

scholarly journals Active Suspension Control Strategy of Multi-Axle Emergency Rescue Vehicle Based on Inertial Measurement Unit

Sensors ◽  
2021 ◽  
Vol 21 (20) ◽  
pp. 6877
Author(s):  
Qinghe Guo ◽  
Dingxuan Zhao ◽  
Xiaolong Zhao ◽  
Zhenxing Li ◽  
Xiaobo Shi
Keyword(s):  
Control Strategy ◽  
Parallel Mechanism ◽  
Inertial Measurement Unit ◽  
Ride Comfort ◽  
Active Suspension ◽  
Vehicle Body ◽  
Measurement Unit ◽  
Inertial Measurement ◽  
Suspension Control ◽  
Pneumatic Suspension

Active suspension control strategies are a top priority in active suspension system. The current research on active suspension control strategies is mostly focused on two-axle vehicles, and there is less research investigating multi-axle vehicles. Additionally, their effective implementation is dependent on accurate mathematical models, and most of them adopt force feedback control, which is vulnerable to external interference. To solve these problems, this paper proposes an active suspension control strategy based on Inertial Measurement Unit. The multi-axle emergency rescue vehicle is made to be equivalent to a 3-degrees-of-freedom parallel mechanism by using the method of grouping and interconnecting the suspension units of the whole vehicle. The attitude change of the vehicle body was transformed into the servo actuator’s displacement by solving the inverse solution of the parallel mechanism position and the action of the servo actuator was driven in reverse according to the displacement obtained. In this way, the vehicle body attitude can be compensated, and the ride comfort and the handling stability of the vehicle can be improved. To verify the effectiveness of the control strategy proposed, the three-axle six vehicle was taken as the research object, the position inverse solution of its equivalent 3-degrees-of-freedom parallel mechanism was deduced, and a high-pass filter was designed. The three-axle vehicle experiment platform integrating active suspension and hydro-pneumatic suspension was built, and the gravel road and slope road experiments were carried out and the results compared with those obtained with hydro-pneumatic suspension. The experiment results showed that, compared with hydro-pneumatic suspension, the active suspension control strategy based on Inertial Measurement Unit proposed in this paper can not only stabilize the body attitude, but also effectively suppress body vibration, improving the ride comfort and handling stability of the vehicle significantly.

Tire Force Control Strategy for Semi Active Magnetorheological Damper Suspension System Using Quarter Heavy Vehicle Model

2015 ◽  
Vol 789-790 ◽  
pp. 957-961
Author(s):  
Syabillah Sulaiman ◽  
Pakharuddin Mohd Samin ◽  
Hishamuddin Jamaluddin ◽  
Roslan Abd Rahman ◽  
Saiful Anuar Abu Bakar
Keyword(s):  
Simulation Model ◽  
Control Strategy ◽  
Force Control ◽  
Mr Damper ◽  
Magnetorheological Damper ◽  
Vehicle Suspension ◽  
Heavy Vehicle ◽  
Vehicle Model ◽  
Tire Force ◽  
Simulation Results

This paper proposed semi active controller scheme for magnetorheological (MR) damper of a heavy vehicle suspension known as Tire Force Control (TFC). A reported algorithm in the literature to reduce tire force is Groundhook (GRD). Thus, the objective of this paper is to investigate the effectiveness of the proposed TFC algorithm compared to GRD. These algorithms are applied to a quarter heavy vehicle models, where the objective of the proposed controller is to reduce unsprung force (tire force). The simulation model was developed and simulated using MATLAB Simulink software. The use of semi active MR damper using TFC is analytically studied. Ride test was conducted at three different speeds and three bump heights, and the simulation results of TFC and GRD are compared and analysed. The results showed that the proposed controller is able to reduced tire force significantly compared to GRD control strategy.

A new semi-active suspension control strategy through LPV technique

2008 ◽  
Vol 16 (12) ◽  
pp. 1519-1534 ◽  
Author(s):  
C. Poussot-Vassal ◽  
O. Sename ◽  
L. Dugard ◽  
P. Gáspár ◽  
Z. Szabó ◽  
...  
Keyword(s):  
Control Strategy ◽  
Active Suspension ◽  
Suspension Control

scholarly journals Active Vehicle Suspension with Anti-Roll System Based on Advanced Sliding Mode Controller

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5560
Author(s):  
Jarosław Konieczny ◽  
Marek Sibielak ◽  
Waldemar Rączka
Keyword(s):  
Ride Comfort ◽  
Sliding Mode ◽  
Synthesis Method ◽  
Active Suspension ◽  
Vehicle Suspension ◽  
Sliding Mode Controller ◽  
Energy Consumption Optimization ◽  
Suspension Control ◽  
Vertical Displacements ◽  
Linear Regulators

In the paper authors consider the active suspension of the wheeled vehicle. The proposed controller consists of a sliding mode controller used to roll reduction and linear regulators with quadratic performance index (LQRs) for struts control was shown. The energy consumption optimization was taken into account at the stage of strut controllers synthesis. The studied system is half of the active vehicle suspension using hydraulic actuators to increase the ride comfort and keeping safety. Instead of installing additional actuators in the form of active anti-roll bars, it has been decided to expand the active suspension control algorithm by adding extra functionality that accounts for the roll. The suggested algorithm synthesis method is based on the object decomposition into two subsystems whose controllers can be synthesized separately. Individual suspension struts are controlled by actuators that use the controllers whose parameters have been calculated with the LQR method. The mathematical model of the actuator applied in the work takes into account its nonlinear nature and the dynamics of the servovalve. The simulation tests of the built active suspension control system have been performed. In the proposed solution, the vertical displacements caused by uneven road surface are reduced by controllers related directly to suspension strut actuators.

scholarly journals Variable damping control strategy of a semi-active suspension based on the actuator motion state

2019 ◽  
Vol 39 (3) ◽  
pp. 787-802 ◽  
Author(s):  
Mingde Gong ◽  
Hao Chen
Keyword(s):  
Control Strategy ◽  
Ride Comfort ◽  
Active Suspension ◽  
Suspension System ◽  
Heavy Vehicles ◽  
Damping Force ◽  
Damping Control ◽  
Motion State ◽  
Variable Damping ◽  
Work First

A semi-active suspension variable damping control strategy for heavy vehicles is proposed in this work. First, a nine-degree-of-freedom model of a semi-active suspension of heavy vehicles and a stochastic road input mathematical model are established. Second, using a 1/6 vehicle as an example, a semi-active suspension system with damping that can be adjusted actively is designed using proportional relief and throttle valves. The damping dynamic characteristics of the semi-active suspension system and the time to establish the damping force are studied through a simulation. Finally, a variable damping control strategy based on an actuator motion state is proposed to adjust the damping force of the semi-active suspension system actively and therefore satisfy the vibration reduction requirements of different roads. Results show that the variable damping control suspension can substantially improve vehicle ride comfort and handling stability in comparison with a passive suspension.

Sign in / Sign up

Export Citation Format

Share Document