Study on General Industrial Solid Waste Situation and its Resource Utilization in Kunming in Recent Years

2015 ◽  
Vol 768 ◽  
pp. 740-745
Author(s):  
Cheng Qiu ◽  
Chun Li Ye ◽  
Li Yong Yang ◽  
Chang Bing Ye
Keyword(s):  
Solid Waste ◽  
Resource Utilization ◽  
Waste Treatment ◽  
Utilization Rate ◽  
Industrial Solid Waste ◽  
Solid Waste Generation ◽  
Solid Waste Treatment ◽  
Generation Capacity ◽  
Rapid Industrialization ◽  
Treatment And Disposal

With rapid industrialization, continuous economic development, increasing population and living standards, the amount of general industrial solid waste generated in Kunming has increased continuously from 2001 to 2011. In 2013, the total general industrial solid waste generation was 33.19 million tons, deceased by 9.59% over 2011. The disposal and comprehensive use amount of general industrial solid waste in Kunming has increased dramatically from 2001 to 2013, and the disposal and comprehensive use rate of industrial solid waste increased fast from 64.39% in 2002 to 97.68% in 2013,but the comprehensive use rate of general industrial solid waste has not increased largely. Kunming’s general industrial solid waste treatment capacity has obvious difference from generation capacity, the produced industrial solid waste each year has the utilization of nearly 40%, with about 60% of the solid waste we cannot use. The disposal and comprehensive use rate of general industrial solid waste is different in different region of Kunming. Although the resource utilization of general industrial solid waste has made some progress in Kunming, the technical level is still very low compared with developed region, specially, the comprehensive utilization rate of phosphogypsum and tailings was not beyond 17% in 2013. Thereafter, much still can be done to improve the treatment and disposal of industrial solid waste in Kunming.

Introduction to Solid Waste Pollution Control and Improvement

2013 ◽  
Vol 664 ◽  
pp. 236-239
Author(s):  
Zhen Min Chen ◽  
Hai Ying Zhang
Keyword(s):  
Solid Waste ◽  
Pollution Control ◽  
Waste Treatment ◽  
Basic Knowledge ◽  
Industrial Solid Waste ◽  
Fast Development ◽  
Solid Waste Treatment ◽  
Control Technologies ◽  
Treatment And Disposal ◽  
And Control

Solid Waste Pollution Control is one of the main special courses offered to students whose major is Environmental Engineering. It aims to let students know basic knowledge and control technologies of solid waste pollution, so that they can solve problems on solid waste treatment and disposal. With increasing generation of solid waste (municipal solid waste and industrial solid waste) in China, solid waste control becomes one of the focus environmental problems facing our country, which depends on efforts of environmental professionals. Solid waste control technology has seen a fast development in recent years. In order to keep up with solid waste control nowadays, it is necessary to develop this course to improve teaching effects. Based on analysis of the current conditions of this course, the paper offers a construction plan for the course in the following aspects: adjustment of the course teaching content, enrichment of teaching methods and teaching mode, preparation of test database and exercise database and suggestion of ways to increasing teaching effect of this course.

Fuzzy multi-criteria decision analysis for environmentally conscious solid waste treatment and disposal technology selection

2019 ◽  
Vol 57 ◽  
pp. 20-29 ◽  
Author(s):  
Manoj Govind Kharat ◽  
Shankar Murthy ◽  
Sheetal Jaisingh Kamble ◽  
Rakesh D. Raut ◽  
Sachin S. Kamble ◽  
...  
Keyword(s):  
Decision Analysis ◽  
Solid Waste ◽  
Waste Treatment ◽  
Technology Selection ◽  
Environmentally Conscious ◽  
Multi Criteria Decision Analysis ◽  
Solid Waste Treatment ◽  
Treatment And Disposal

Description of Municipal Solid Waste Treatment

2013 ◽  
Vol 663 ◽  
pp. 836-839
Author(s):  
Ping Cao ◽  
Wei Zhao ◽  
Wei Hong Xia
Keyword(s):  
Municipal Solid Waste ◽  
Solid Waste ◽  
Undergraduate Students ◽  
Waste Treatment ◽  
Environmental Engineering ◽  
Teaching Content ◽  
Treatment Technologies ◽  
Solid Waste Generation ◽  
Solid Waste Treatment ◽  
Test Database

Our country has seen a rapid growth of municipal solid waste generation, which requires proper treatment. Therefore, there’s a great need for professionals special in municipal solid waste treatment, which makes the course of Municipal Solid Waste Treatment necessary for undergraduate students majoring in Environmental Engineering. Municipal Solid Waste Treatment is one of the main special courses offered to students whose major is Environmental Engineering. Through learning of this course, the students could grasp basic treatment technologies of MSW, e.g. pulverizing, composting, incineration, pulverizing and etc. In order to keep up with solid waste treatment nowadays, it is necessary to develop this course to improve teaching effects. Firstly, this paper described the current conditions of this course. Secondly, it offers a construction plan in adjustment of the course teaching content, enrichment of teaching methods and teaching mode, preparation of test database and exercise database and suggestion of ways to increasing teaching effect of this course.

scholarly journals Preliminary Study of Solid Waste Treatment of Padang Beach Tourism Area, Padang City

2021 ◽  
Vol 4 (1) ◽  
pp. 31-34
Author(s):  
Rizki Aziz ◽  
Gloria Poppy Adfuza ◽  
Yaumal Arbi
Keyword(s):  
Solid Waste ◽  
Food Waste ◽  
Waste Treatment ◽  
Economic Value ◽  
Third Party ◽  
Yard Waste ◽  
Beach Tourism ◽  
Solid Waste Generation ◽  
Solid Waste Treatment ◽  
Preliminary Study

Preliminary study of the solid waste treatment of Padang Beach tourist area has done in order to analyze solid waste generation, composition, the potency of recycling, and to recommend the appropriate treatment system applies on the tourist area. The study revealed that daily waste generated as 18.648 L, the components of the waste dominated by food waste 84.215%, plastic 9.254%, paper 2.087%, and non-metal ferrous 1.945%. The potency of recycling of the waste was food waste 91.732%, plastic 88.074%, metals 78.947% and glass 75.758%. By this study it is recommended that waste that has economic value such as plastic, paper, and metal should be collected and sold to the third party, biodegradable waste such as food waste and yard waste should be composted, while others waste that has potency to produce handy craft such as seashell, coconut shell, and sachet packaging should be collected and processed, all treatment activities can be done at the recycling center that located in the tourist area.

scholarly journals CONSTRUCTION OF INDUSTRIAL SOLID WASTE TREATMENT COSTS OF THE MECHANICAL INDUSTRY IN HO CHI MINH CITY

2012 ◽  
Vol 15 (4) ◽  
pp. 48-62
Author(s):  
Tuan Ngoc Le ◽  
Linh Thi Thuy Nguyen
Keyword(s):  
Solid Waste ◽  
Hazardous Waste ◽  
Waste Treatment ◽  
Treatment Costs ◽  
Ho Chi Minh City ◽  
Treatment Level ◽  
Treatment Technology ◽  
Industrial Solid Waste ◽  
Hazardous Waste Treatment ◽  
Solid Waste Treatment

Survey results in 72 mechanical manufactures in Ho Chi Minh City, in conjunction with related studies show that the charge of industrial solid waste – hazardous waste treatment is operated in two forms: fixed or progressive based on the generated volume. Price of collection - transportation - storage - treatment - landfill for each waste composition is widely varying (5-20 times), depending on the agreement between production facilities and service units. Price is not yet able to handle the relationship with the treatment technology, treatment level to be achieved as well as the correlation to the transported distance and the extent of hazardous waste. Methodology for calculating the costs of industrial solid waste treatment by burning method is initially set. Treatment costs per ton of industrial solid waste of the mechanical industry are determined. The formulas are specifically built for each case of emissions, corresponding to different levels of load transportation.

Sign in / Sign up

Export Citation Format

Share Document