Mechanics Analysis of Long Jump by Means of the Theory of Artificial Neural Networks

2014 ◽  
Vol 1014 ◽  
pp. 106-109
Author(s):  
Qun Long Wang

Takeoff is extremely important to long jump. The paper analyzes the mechanics characteristics of takeoff for long jump by means of the theory of neural network. It firstly discusses some importantly influencing factors for long jump in theory. On the basis of description of the theory of Artificial Neural Network, the back propagation network is applied to model the long jump. The results show that an excellent performance of long jump is depend on a rapid run-up speed and the rhythm of the final two steps.

Author(s):  
Asma Elyounsi ◽  
Hatem Tlijani ◽  
Mohamed Salim Bouhlel

Traditional neural networks are very diverse and have been used during the last decades in the fields of data classification. These networks like MLP, back propagation neural networks (BPNN) and feed forward network have shown inability to scale with problem size and with the slow convergence rate. So in order to overcome these numbers of drawbacks, the use of higher order neural networks (HONNs) becomes the solution by adding input units along with a stronger functioning of other neural units in the network and transforms easily these input units to hidden layers. In this paper, a new metaheuristic method, Firefly (FFA), is applied to calculate the optimal weights of the Functional Link Artificial Neural Network (FLANN) by using the flashing behavior of fireflies in order to classify ISA-Radar target. The average classification result of FLANN-FFA which reached 96% shows the efficiency of the process compared to other tested methods.


2010 ◽  
Vol 61 (4) ◽  
pp. 235-240 ◽  
Author(s):  
Perumal Chandrasekar ◽  
Vijayarajan Kamaraj

Detection and Classification of Power Quality Disturbancewaveform Using MRA Based Modified Wavelet Transfrom and Neural Networks In this paper, the modified wavelet based artificial neural network (ANN) is implemented and tested for power signal disturbances. The power signal is decomposed by using modified wavelet transform and the classification is carried by using ANN. Discrete modified wavelet transforms based signal decomposition technique is integrated with the back propagation artificial neural network model is proposed. Varieties of power quality events including voltage sag, swell, momentary interruption, harmonics, transient oscillation and voltage fluctuation are used to test the performance of the proposed approach. The simulation is carried out by using MATLAB software. The simulation results show that the proposed scheme offers superior detection and classification compared to the conventional approaches.


2017 ◽  
Vol 43 (4) ◽  
pp. 26-32 ◽  
Author(s):  
Sinan Mehmet Turp

AbstractThis study investigates the estimated adsorption efficiency of artificial Nickel (II) ions with perlite in an aqueous solution using artificial neural networks, based on 140 experimental data sets. Prediction using artificial neural networks is performed by enhancing the adsorption efficiency with the use of Nickel (II) ions, with the initial concentrations ranging from 0.1 mg/L to 10 mg/L, the adsorbent dosage ranging from 0.1 mg to 2 mg, and the varying time of effect ranging from 5 to 30 mins. This study presents an artificial neural network that predicts the adsorption efficiency of Nickel (II) ions with perlite. The best algorithm is determined as a quasi-Newton back-propagation algorithm. The performance of the artificial neural network is determined by coefficient determination (R2), and its architecture is 3-12-1. The prediction shows that there is an outstanding relationship between the experimental data and the predicted values.


2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Aminmohammad Saberian ◽  
H. Hizam ◽  
M. A. M. Radzi ◽  
M. Z. A. Ab Kadir ◽  
Maryam Mirzaei

This paper presents a solar power modelling method using artificial neural networks (ANNs). Two neural network structures, namely, general regression neural network (GRNN) feedforward back propagation (FFBP), have been used to model a photovoltaic panel output power and approximate the generated power. Both neural networks have four inputs and one output. The inputs are maximum temperature, minimum temperature, mean temperature, and irradiance; the output is the power. The data used in this paper started from January 1, 2006, until December 31, 2010. The five years of data were split into two parts: 2006–2008 and 2009-2010; the first part was used for training and the second part was used for testing the neural networks. A mathematical equation is used to estimate the generated power. At the end, both of these networks have shown good modelling performance; however, FFBP has shown a better performance comparing with GRNN.


1997 ◽  
Vol 5 (1) ◽  
pp. 19-25 ◽  
Author(s):  
Maha Hana ◽  
W.F. McClure ◽  
T.B. Whitaker ◽  
M.W. White ◽  
D.R. Bahler

Classification of flue-cured and Burley tobacco types with artificial neural networks (ANNs) were studied. Burley tobacco was further classified as either grown in the USA or grown outside the USA. The input data were in the form of near infrared (NIR) spectra, each spectrum containing 19 points. The number of flue-cured and Burley samples were 654 and 959, respectively. The number of native and non-native tobacco samples were 266 and 267, respectively. The models selected for this research were a quadratic classifier, a back-propagation network and a linear network. The results of the calibration model and the true performance for classifying tobacco species were (100%, 100%), (99.38%, 99.39%) and (95.19%, 99.26%) for the quadratic classifier, back-propagation network and linear network, respectively. The identification of native tobacco and its true performance were (100%, 100%) using a quadratic classifier, (89.12%, 88.46%) using a back-propagation network and (80.68%, 79.62%) using a linear network.


2011 ◽  
Vol 121-126 ◽  
pp. 1363-1366
Author(s):  
Shi Lei Zhang ◽  
Shao Feng Chen ◽  
Huan Ding Wang ◽  
Wei Wang

Based on the artificial neural network, the parameters of a steel truss are identified. And the finite element model of truss is corrected. In order to improve the efficiency of model updating by artificial neural networks, the momentum is introduced into the back propagation algorithm. Based on the theory of probability and mathematical statistics, the expectation confidence interval of the measured deflections and strains is obtained. In this way, the samples to train the neural network are optimized. The numerical results show that the back propagation neural network proposed on this paper is able to correct the finite element model of the truss effectively.


2011 ◽  
Vol 52-54 ◽  
pp. 2105-2110 ◽  
Author(s):  
Ing Jiunn Su ◽  
Chia Chih Tsai ◽  
Wen Tsai Sung

Artificial neural networks (ANNs) are one of the most recently explored advanced technologies which show promise in the factory monitoring area. This paper focuses on two particular network models, back-propagation network (BPN) and general regression neural network (GRNN). The prediction accuracy of these two models is evaluated using a practical application situation in a monitor factory. GRNN emerged as a variant of the artificial neural network. Its principal advantages are that it can quickly learn and rapidly converge to the optimal regression surface with large number of data sets. According the simulation results we can show that GRNN is an effective way to considerably improve the predictive ability of BPN.


2020 ◽  
Vol 39 (3) ◽  
pp. 942-952
Author(s):  
O.T. Badejo ◽  
O.T. Jegede ◽  
H.O. Kayode ◽  
O.O. Durodola ◽  
S.O. Akintoye

Water current modelling and prediction techniques along coastal inlets have attracted growing concern in recent years. This is largely so because water current component continues to be a major contributor to movement of sediments, tracers and pollutants, and to a whole range of offshore applications in engineering, environmental observations, exploration and oceanography. However, most research works are lacking adequate methods for developing precise prediction models along the commodore channel in Lagos State. This research work presents water current prediction using Artificial Neural Networks (ANNs). The Back Propagation (BP) technique with feed forward architecture and optimized training algorithm known as Levenbergq-Marquardt was used to develop a Neural Network Water Current Prediction model-(NNWLM) in a MATLAB programming environment. It was passed through model sensitivity analysis and afterwards tested with data from the Commodore channel (Lagos Lagoon). The result revealed prediction accuracy ranging from 0.012 to 0.045 in terms of Mean Square Error (MSE) and 0.80 to 0.83 in terms of correlation coefficient (R-value). With this high performance, the Neural network developed in this work can be used as a veritable tool for water current prediction along the Commodore channel and in extension a wide variety of coastal engineering and development, covering sediment management program: dredging, sand bypassing, beach-contingency plans, and protection of beaches vulnerable to storm erosion and monitoring and prediction of long-term water current variations in coastal inlets. Keywords: Artificial Neural Network, Commodore Channel, Coastal Inlet, Water Current, Back Propagation.


2018 ◽  
Vol 7 (2.13) ◽  
pp. 402
Author(s):  
Y Yusmartato ◽  
Zulkarnain Lubis ◽  
Solly Arza ◽  
Zulfadli Pelawi ◽  
A Armansah ◽  
...  

Lockers are one of the facilities that people use to store stuff. Artificial neural networks are computational systems where architecture and operations are inspired by the knowledge of biological neurons in the brain, which is one of the artificial representations of the human brain that always tries to stimulate the learning process of the human brain. One of the utilization of artificial neural network is for pattern recognition. The face of a person must be different but sometimes has a shape similar to the face of others, because the facial pattern is a good pattern to try to be recognized by using artificial neural networks. Pattern recognition on artificial neural network can be done by back propagation method. Back propagation method consists of input layer, hidden layer and output layer.  


Author(s):  
M. Sailaja ◽  
R. D. V. Prasad

Nowadays the robot technology is advancing rapidly and the use of robots in industries has been increasing. In designing a robot manipulator, kinematicsplays a vital role. The kinematic problem of manipulator control is divided into two types, direct kinematics and inverse kinematics. Robot inverse kinematics, which is important in robot path planning, is a fundamental problem in robotic control. Past solutions for this problem have been through the use of various algebraic or algorithmic procedures, which may be less accurate and time consuming. Artificial neural networks have the ability to approximate highly non-linear functions applied in robot control. The neural network approach deserves examination because of the fundamental properties of computation speed, and they can generalize untrained solutions. In the present work an attempt has been made to evaluate the problemof robot inverse kinematics of Stanford manipulator using artificial neural network approach. Finally two programs are written using C language to solve inverse kinematic problem of Stanford manipulator using Back propagation method of artificial neural network. In this network, the input layer has six nodes, the hidden layer has three nodes, and the output layer has two nodes. And also Elbow manipulator was modelled and its direct kinematics was analysed.


Sign in / Sign up

Export Citation Format

Share Document