scholarly journals Prediction of adsorption efficiencies of Ni (II) in aqueous solutions with perlite via artificial neural networks

2017 ◽  
Vol 43 (4) ◽  
pp. 26-32 ◽  
Author(s):  
Sinan Mehmet Turp
Keyword(s):  
Neural Network ◽  
Experimental Data ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Back Propagation ◽  
Data Sets ◽  
Adsorption Efficiency ◽  
Back Propagation Algorithm ◽  
Artificial Neural

AbstractThis study investigates the estimated adsorption efficiency of artificial Nickel (II) ions with perlite in an aqueous solution using artificial neural networks, based on 140 experimental data sets. Prediction using artificial neural networks is performed by enhancing the adsorption efficiency with the use of Nickel (II) ions, with the initial concentrations ranging from 0.1 mg/L to 10 mg/L, the adsorbent dosage ranging from 0.1 mg to 2 mg, and the varying time of effect ranging from 5 to 30 mins. This study presents an artificial neural network that predicts the adsorption efficiency of Nickel (II) ions with perlite. The best algorithm is determined as a quasi-Newton back-propagation algorithm. The performance of the artificial neural network is determined by coefficient determination (R2), and its architecture is 3-12-1. The prediction shows that there is an outstanding relationship between the experimental data and the predicted values.

scholarly journals New Method for Locker Door with Face Security System Using Backpropagation Algorithm

2018 ◽  
Vol 7 (2.13) ◽  
pp. 402
Author(s):  
Y Yusmartato ◽  
Zulkarnain Lubis ◽  
Solly Arza ◽  
Zulfadli Pelawi ◽  
A Armansah ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Pattern Recognition ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Human Brain ◽  
Back Propagation ◽  
The Face ◽  
Artificial Neural ◽  
Hidden Layer

Lockers are one of the facilities that people use to store stuff. Artificial neural networks are computational systems where architecture and operations are inspired by the knowledge of biological neurons in the brain, which is one of the artificial representations of the human brain that always tries to stimulate the learning process of the human brain. One of the utilization of artificial neural network is for pattern recognition. The face of a person must be different but sometimes has a shape similar to the face of others, because the facial pattern is a good pattern to try to be recognized by using artificial neural networks. Pattern recognition on artificial neural network can be done by back propagation method. Back propagation method consists of input layer, hidden layer and output layer.  

Back Propagation Method of Artificial Neural Networks for Finding the Position Control of Stanford Manipulator and Direct Kinematic Analysis of Elbow Manipulator

2018 ◽  
Vol 7 (1) ◽  
pp. 46 ◽  
Author(s):  
M. Sailaja ◽  
R. D. V. Prasad
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Inverse Kinematics ◽  
Back Propagation ◽  
Network Approach ◽  
Neural Network Approach ◽  
Artificial Neural ◽  
Direct Kinematics

Nowadays the robot technology is advancing rapidly and the use of robots in industries has been increasing. In designing a robot manipulator, kinematicsplays a vital role. The kinematic problem of manipulator control is divided into two types, direct kinematics and inverse kinematics. Robot inverse kinematics, which is important in robot path planning, is a fundamental problem in robotic control. Past solutions for this problem have been through the use of various algebraic or algorithmic procedures, which may be less accurate and time consuming. Artificial neural networks have the ability to approximate highly non-linear functions applied in robot control. The neural network approach deserves examination because of the fundamental properties of computation speed, and they can generalize untrained solutions. In the present work an attempt has been made to evaluate the problemof robot inverse kinematics of Stanford manipulator using artificial neural network approach. Finally two programs are written using C language to solve inverse kinematic problem of Stanford manipulator using Back propagation method of artificial neural network. In this network, the input layer has six nodes, the hidden layer has three nodes, and the output layer has two nodes. And also Elbow manipulator was modelled and its direct kinematics was analysed.

Use of Artificial Neural Networks for Calculating Elasticity Modulus of Construction Layers of Non-Rigid Road Surfacing Based on Natural Data

2020 ◽  
pp. 111-120
Author(s):  
М. М. М. Елшами ◽  
А. Н. Тиратурян ◽  
А. Н. Канищев
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Elastic Moduli ◽  
Back Propagation ◽  
Data Set ◽  
Artificial Neural ◽  
Instrumental Recording ◽  
Accuracy Of Prediction

Постановка задачи. Рассматриваются вопросы использования искусственных нейронных сетей при решении задач обработки результатов инструментальных регистраций чаш прогибов нежесткой дорожной одежды с использованием установок ударного нагружения FWD . Результаты. Проведен анализ и отмечены недостатки существующих методов обработки экспериментальных чаш прогибов, в частности метода обратного расчета модулей упругости слоев дорожных одежд, заключающиеся в длительном времени выполнения расчетов и неустойчивости получаемых результатов. Построена структура искусственной нейронной сети для определения модулей упругости слоев дорожной одежды. Обучение искусственной нейронной сети осуществлялось с использованием метода обратного распространения ошибки. Выводы. Разработанная нейронная сеть продемонстрировала хорошие результаты при обучении по тестовому набору данных, а также высокую точность прогнозирования модулей упругости слоев дорожных одежд. Statement of the problem. The article is devoted to the use of artificial neural networks in solving the problems of processing the results of instrumental recording of bowls of deflections of non-rigid road surfacing using FWD shock loading settings. Results. The analysis was carried out, the shortcomings of the existing processing methods were identified, in particular the backcalculation method, which involves a long calculation time, and the instability of the results obtained. The structure of the artificial neural network was designed to determine the elastic moduli of the pavement layers. Training of an artificial neural network was carried out using the method of back propagation of error. Conclusions. The developed neural network has shown good results in training on the test data set, as well as high accuracy of prediction of the elastic moduli of the pavement.

Artificial Neural Network Modelling for Waste

2011 ◽  
pp. 224-263 ◽  
Author(s):  
Eldon R. Rene ◽  
M. Estefanía López ◽  
María C. Veiga ◽  
Christian Kennes
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Wastewater Treatment ◽  
Back Propagation ◽  
Back Propagation Algorithm ◽  
Network Modelling ◽  
Waste Gas ◽  
Propagation Algorithm ◽  
Artificial Neural

Due to their inherent robustness, artificial neural network models have proven to be successful and have been used extensively in biological wastewater treatment applications. However, only recently, with the scientific advancements made in biological waste gas treatment systems, the application of neural networks have slowly gained the practical momentum for performance monitoring in this field. Simple neural models, after vigorous training and testing, are able to generalize the results of a wide range of operating conditions, with high prediction accuracy. This chapter gives a fundamental insight and overview of the process mechanism of different biological waste gas (biofilters, biotrickling filters, continuous stirred tank bioreactors and monolith bioreactors), and wastewater treatment systems (activated sludge process, trickling filter and sequencing batch reactors). The basic theory of artificial neural networks is explained with a clear understanding of the back propagation algorithm. A generalized neural network modelling procedure for waste treatment applications is outlined, and the role of back propagation algorithm network parameters is discussed. Anew, the application of neural networks for solving specific environmental problems is presented in the form of a literature review.

Prediction of Surface Roughness in High Speed Milling Process Using the Artificial Neural Networks

2007 ◽  
Vol 364-366 ◽  
pp. 713-718 ◽  
Author(s):  
Dong Woo Kim ◽  
Young Jae Shin ◽  
Kyoung Taik Park ◽  
Eung Sug Lee ◽  
Jong Hyun Lee ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Surface Roughness ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
High Speed ◽  
Back Propagation Algorithm ◽  
High Speed Milling ◽  
Artificial Neural ◽  
Cutting Path

The objective of this research was to apply the artificial neural network algorithm to predict the surface roughness in high speed milling operation. Tool length, feed rate, spindle speed, cutting path interval and run-out were used as five input neurons; and artificial neural networks model based on back-propagation algorithm was developed to predict the output neuron-surface roughness. A series of experiments was performed, and the results were estimated. The experimental results showed that the applied artificial neural network surface roughness prediction gave good accuracy in predicting the surface roughness under a variety of combinations of cutting conditions.

scholarly journals Application of artificial neural networks in the process of drying CPC

2020 ◽  
Vol 216 ◽  
pp. 01128
Author(s):  
Yunusov Bakhtiar
Keyword(s):  
Neural Network ◽  
Experimental Data ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Ethical Issues ◽  
Computing System ◽  
Powdered Cellulose ◽  
Neural Simulation ◽  
Artificial Neural

Training of artificial neural networks using the experimental data obtained in the process of drying of cotton powdered cellulose (CPC), have shown that, experiments can be conducted on the computers, which solves many of the practical and ethical issues. Therefore, arose and remain at the present time, the objective of neural simulation of processes and create a computing system (artificial neural network)

Relative density prognosis for directed energy deposition with the help of artificial neural networks

2021 ◽  
Vol 63 (1) ◽  
pp. 41-47
Author(s):  
Angelina Marko ◽  
Andreas Schafner ◽  
Julius Raute ◽  
Michael Rethmeier
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Relative Density ◽  
Process Parameters ◽  
Energy Deposition ◽  
Data Sets ◽  
Artificial Neural ◽  
Directed Energy

Abstract Additive manufacturing, and therefore directed energy deposition, is gaining more and more interest from industrial users. However, quality assurance for the components produced is still a challenge. Machine learning, especially using artificial neuronal networks, is a potential method for ensuring a high-quality standard. Based on process parameters and monitoring data, part quality can be predicted. A further advantage is the ability to constantly learn and adopt to slight process changes. First tests using artificial neural networks focus on the prediction of track geometry. The results show that even a small data set is enough to provide high accuracy in the predictions. In this work, an artificial neural network for the predictive analysis of relative density in laser powder cladding has been developed. A central composite experimental design is used to generate 19 data sets. Input variables are laser power, feed rate and powder mass flow. Cubes are built up where density is considered as a target value. Several neural networks are trained and evaluated with these data sets. Different topologies and initial weights are considered. The best network reaches a confidence level of around 90 % for the prediction of relative density based on the process parameters. Finally, the optimization of the generalization performance is investigated. To this purpose, methods of variation in error limit as well as cross-validation are applied. In this way, density is predictable by an artificial neural network with an accuracy of about 95 %.

FORECASTING THE INTENSITY OF SOLAR RADIATION BASED ON ARTIFICIAL NEURAL NETWORKS

2021 ◽  
Vol 43 (2) ◽  
pp. 60-67
Author(s):  
B.I. Basok ◽  
M.P. Novitska ◽  
V.P. Kravchenko
Keyword(s):  
Neural Network ◽  
Experimental Data ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Solar Radiation ◽  
Data Set ◽  
Advantages And Disadvantages ◽  
Database Evaluation ◽  
Artificial Neural

The paper considers short-term forecasting of the intensity of solar radiation in the city of Odessa based on an artificial neural network. The artificial neural network was trained on the experimental data of the ground weather station (Davis 6162EU), which is installed on the roof of the educational building of the Odessa National Polytechnic University. Modeling, validation, and testing of experimental data were performed using the MATLAB software package, namely Neural Network Toolbox. The Levenberg-Markwatt model is used in this work. The analyzed data set was divided into proportions of 70%, 15%, 15% for neural network training, its validation, and testing, respectively. The results which the trained neural network gave during forecasting within the framework of the database and outside it are given. The deviation between real and forecast data is analyzed. The root-mean-square error on December 26, 2016 was 13.03 W / m2, and on December 27, 2016 - 9.44 W / m2 when forecasting outside the database. Evaluation of the accuracy of an artificial neural network has shown its effectiveness in predicting the intensity of solar radiation. To predict parameters based on artificial neural networks, experimental data that describe a real system are needed. Artificial neural networks, like other approximation methods, have both advantages and disadvantages.

Damage Identification of Rock Mass with Artificial Neural Networks

2007 ◽  
Vol 353-358 ◽  
pp. 2325-2328
Author(s):  
Zi Chang Shangguan ◽  
Shou Ju Li ◽  
Mao Tian Luan
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Damage Identification ◽  
Back Propagation ◽  
Training Time ◽  
Marquardt Algorithm ◽  
Artificial Neural ◽  
High Degree

The inverse problem of rock damage detection is formulated as an optimization problem, which is then solved by using artificial neural networks. Convergence measurements of displacements at a few of positions are used to determine the location and magnitude of the damaged rock in the excavation disturbed zones. Unlike the classical optimum methods, ANN is able to globally converge. However, the most frequently used Back-Propagation neural networks have a set of problems: dependence on initial parameters, long training time, lack of problemindependent way to choose appropriate network topology and incomprehensive nature of ANNs. To identify the location and magnitude of the damaged rock using an artificial neural network is feasible and a well trained artificial neural network by Levenberg-Marquardt algorithm reveals an extremely fast convergence and a high degree of accuracy.

scholarly journals The Use of Artificial Neural Networks in Prediction of Congenital CMV Outcome from Sequence Data

2008 ◽  
Vol 2 ◽  
pp. BBI.S764 ◽  
Author(s):  
Ravit Arav-Boger ◽  
Yuval S. Boger ◽  
Charles B. Foster ◽  
Zvi Boger
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Sequence Data ◽  
Biological Significance ◽  
Data Sets ◽  
Artificial Neural ◽  
Cmv Disease ◽  
Congenital Cmv

A large number of CMV strains has been reported to circulate in the human population, and the biological significance of these strains is currently an active area of research. The analysis of complex genetic information may be limited using conventional phylogenetic techniques. We constructed artificial neural networks to determine their feasibility in predicting the outcome of congenital CMV disease (defined as presence of CMV symptoms at birth) based on two data sets: 54 sequences of CMV gene UL144 obtained from 54 amniotic fluids of women who contracted acute CMV infection during their pregnancy, and 80 sequences of 4 genes (US28, UL144, UL146 and UL147) obtained from urine, saliva or blood of 20 congenitally infected infants that displayed different outcomes at birth. When data from all four genes was used in the 20-infants’ set, the artificial neural network model accurately identified outcome in 90% of cases. While US28 and UL147 had low yield in predicting outcome, UL144 and UL146 predicted outcome in 80% and 85% respectively when used separately. The model identified specific nucleotide positions that were highly relevant to prediction of outcome. The artificial neural network classified genotypes in agreement with classic phylogenetic analysis. We suggest that artificial neural networks can accurately and efficiently analyze sequences obtained from larger cohorts to determine specific outcomes. The ANN training and analysis code is commercially available from Optimal Neural Informatics (Pikesville, MD).

Sign in / Sign up

Export Citation Format

Share Document