Preparation of CdO Nanowires from CdO2 Nanoparticles

2014 ◽  
Vol 1035 ◽  
pp. 321-324 ◽  
Author(s):  
Jing Li ◽  
Yan Chen ◽  
Yong Cai Zhang ◽  
Jin Gui Duan
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Deionized Water ◽  
Mixed Solution ◽  
X Ray Diffraction ◽  
Step Method ◽  
X Ray ◽  
Solvothermal Treatment ◽  
Transmission Electron

A two-step method was developed for the preparation of CdO nanowires from CdO2 nanoparticles, that is, first, Cd(OH)2 nanowires were synthesized via solvothermal treatment of CdO2 nanoparticles in the mixed solution of deionized water and toluene at 180 °C for 24 h; second, CdO nanowires were obtained by thermolysis of the Cd(OH)2 nanowires in air at 300 °C for 3 h. The obtained products were characterized by powder X-ray diffraction and transmission electron microscopy.

Efficient improvement in non-enzymatic glucose detection induced by the hollow prism-like NiCo2S4 electrocatalyst

2021 ◽  
Author(s):  
Dandan Chu ◽  
Li Yan ◽  
Qiwen Chen ◽  
Xue-Qiang Chu ◽  
Danhua Ge ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Glucose Detection ◽  
X Ray Diffraction ◽  
Step Method ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

The hollow prism-like NiCo2S4 mateials (NiCo2S4 HNPs) were successfully fabricated by a two-step method. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and a powder X-ray diffraction (XRD) confirmed the...

Study on the Morphology and Phases of Cu-Se Powders Synthesized by Hydrothermal Co-Reduction

2010 ◽  
Vol 29-32 ◽  
pp. 1824-1827
Author(s):  
Ke Gao Liu ◽  
Bo Pang ◽  
Zhi Gang Wang ◽  
Bin Xu
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Deionized Water ◽  
Experimental Results ◽  
Side Length ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Lower Temperature ◽  
Co Reduction

Cu-Se compound powders are synthesized by hydrothermal co-reduction from CuSO4•5H2O and SeO2 in deionized water at 120～200 °C. The phases and morphology of the products were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM) respectively. Experimental results show that, the CuSe phase can be synthesized at 120,150,180 and 200 °C, however, the purity phases become more with the temperature decreasing. It indicates that the reaction is more incomplete at lower temperature. Hexagonal flakes with side length 100～400 nm can be observed in the products at 150,180 and 200 °C, among which only the product prepared at 180 °C has the hexagonal flakes with good dispersity and homogeneous size with 200 nm length.

Synthesis of Hollow Sphere CdSe from CdCl2 Aqueous Solution Containing Ethylenediamine

2007 ◽  
Vol 336-338 ◽  
pp. 2037-2040
Author(s):  
Moon Hee Choi ◽  
Yoon Bok Lee ◽  
In Bae Kim ◽  
Young Seok Kim ◽  
Young Mok Rhyim ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Hollow Sphere ◽  
Morphological Difference ◽  
Molar Ratio ◽  
Mixed Solution ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Sodium Selenosulfate

Cadmium selenide (CdSe) of hollow sphere with 30-50nm in diameter have been prepared form the mixed solution of cadmium chloride (CdCl2), sodium selenosulfate(Na2SeSO3) and ethylenediamine (H2NCH2CH2NH2) at room temperature. The hollow sphere of CdSe was characterized by transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). The molar ratio of EDA to Cd2+ ions in this system was important factor on controlled synthesis in the self-encapsulated morphology. Based on the observation on morphological difference with molar ratio of EDA to Cd2+ ion, the possible mechanism for the formation of CdSe hollow sphere was discussed.

A High Resolution Study of G.P. Zones in Aluminum - 4.2 at % Silver

1982 ◽  
Vol 40 ◽  
pp. 722-723 ◽  
Author(s):  
R. Gronsky
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Computer Simulations ◽  
Structural Characteristics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Resolution Study

The phenomenon of clustering in Al-Ag alloys has been extensively studied since the early work of Guinierl, wherein the pre-precipitation state was characterized as an assembly of spherical, ordered, silver-rich G.P. zones. Subsequent x-ray and TEM investigations yielded results in general agreement with this model. However, serious discrepancies were later revealed by the detailed x-ray diffraction - based computer simulations of Gragg and Cohen, i.e., the silver-rich clusters were instead octahedral in shape and fully disordered, atleast below 170°C. The object of the present investigation is to examine directly the structural characteristics of G.P. zones in Al-Ag by high resolution transmission electron microscopy.

scholarly journals Quartz Crystallite Size and Moganite Content as Indicators of the Mineralogical Maturity of the Carboniferous Chert: The Case of Cherts from Eastern Asturias (Spain)

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 611
Author(s):  
Celia Marcos ◽  
María de Uribe-Zorita ◽  
Pedro Álvarez-Lloret ◽  
Alaa Adawy ◽  
Patricia Fernández ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Crystallite Size ◽  
Archaeological Sites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Infrared And Raman Spectroscopy ◽  
First Time ◽  
Geological Formations

Chert samples from different coastal and inland outcrops in the Eastern Asturias (Spain) were mineralogically investigated for the first time for archaeological purposes. X-ray diffraction, X-ray fluorescence, transmission electron microscopy, infrared and Raman spectroscopy and total organic carbon techniques were used. The low content of moganite, since its detection by X-ray diffraction is practically imperceptible, and the crystallite size (over 1000 Å) of the quartz in these cherts would be indicative of its maturity and could potentially be used for dating chert-tools recovered from archaeological sites. Also, this information can constitute essential data to differentiate the cherts and compare them with those used in archaeological tools. However, neither composition nor crystallite size would allow distinguishing between coastal and inland chert outcrops belonging to the same geological formations.

Multi-scale Investigation of Heterogeneous Swift Heavy Ion Tracks in Stannate Pyrochlore

2021 ◽  
Author(s):  
Eric O'Quinn ◽  
Cameron Tracy ◽  
William F. Cureton ◽  
Ritesh Sachan ◽  
Joerg C. Neuefeind ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Heavy Ion ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structural Modifications ◽  
Multi Scale ◽  
Ion Tracks ◽  
Swift Heavy Ion ◽  
Transmission Electron

Er2Sn2O7 pyrochlore was irradiated with swift heavy Au ions (2.2 GeV), and the induced structural modifications were systematically examined using complementary characterization techniques including transmission electron microscopy (TEM), X-ray diffraction...

Detonation Synthesis of Nano-Size Materials

1995 ◽  
Vol 418 ◽  
Author(s):  
J. Forbes ◽  
J. Davis ◽  
C. Wong
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Nucleation And Growth ◽  
Detonation Synthesis ◽  
X Ray Diffraction ◽  
Crystalline Materials ◽  
X Ray ◽  
Transmission Electron ◽  
Nano Size

AbstractThe detonation of explosives typically creates 100's of kbar pressures and 1000's K temperatures. These pressures and temperatures last for only a fraction of a microsecond as the products expand. Nucleation and growth of crystalline materials can occur under these conditions. Recovery of these materials is difficult but can occur in some circumstances. This paper describes the detonation synthesis facility, recovery of nano-size diamond, and plans to synthesize other nano-size materials by modifying the chemical composition of explosive compounds. The characterization of nano-size diamonds by transmission electron microscopy and electron diffraction, X-ray diffraction and Raman spectroscopy will also be reported.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Sign in / Sign up

Export Citation Format

Share Document