Studies on Liquefaction Failure Forms and its Damage to Engineering

2014 ◽  
Vol 1065-1069 ◽  
pp. 1540-1546
Author(s):  
Xiao Ling Chen ◽  
Xiao Yan Wang ◽  
Dong Li

The liquefaction failure forms are reviewed, including foundation strength failure, sand boil, seismic settlement, large ground displacement and flow slide. Taking pile foundations and buried pipeline as examples, there suggested some measures to reduce hazards of liquefaction.

2011 ◽  
Vol 99-100 ◽  
pp. 410-413
Author(s):  
Ai Ping Tang ◽  
Ai Hua Wen ◽  
Li Hua Gai ◽  
Ru Hong Zhong

This paper deals with an isolation design methods of buried segment pipeline for large ground displacement in earthquake. The buried pipeline is always damaged due to the strong shaking and earthquake-induced large or permant ground displacement and deformation (PGD), including liquefaction, rock and soil slope failure, fault and fissure. Based on the seismic response analysis for buried segment pipeline, the isolation mechanism and an equipment for resisting ground displacement trigged by liquefaction and fault is presented in this paper. Some related parameters to isolation system like stiffness and damp of isolator, soil types and its displacement, depth of pipeline, are discussed for developing a reliable isolation system fitting the buried segment pipeline.


2002 ◽  
pp. 103-112 ◽  
Author(s):  
Kiyoshi SATO ◽  
Masaaki MATSUMOTO ◽  
Shiro TAKADA ◽  
Yasuo OGAWA

2017 ◽  
Vol 14 (1) ◽  
pp. 53
Author(s):  
Arwan Apriyono ◽  
Sumiyanto Sumiyanto ◽  
Nanang Gunawan Wariyatno

Gunung Tugel is an area that located Patikraja Region, Southern Banyumas. Thetopography of the area is mostly mountainous with a slope that varies from flat to steep. Thiscondition makes to many areas of this region potentially landslide. In 2015, a landslideoccurred in Jalan Gunung Tugel. The Landslide occurred along 70 meters on the half of theroad and causing traffic Patikraja-Purwokerto disturbed. To repair the damage of the road andavoid further landslides, necessary to analyze slope stability. This study is to analyze landslidereinforcement that occurred at Gunung Tugel and divides into 3 step. The first step is fieldinvestigation to determine the condition of the location and dimensions of landslides. Thesecond step is to know the soil parameters and analyzes data were obtained from the field. Andthe final step is analyzed of the landslide reinforcement by using data obtained from thepreceding step. In this research, will be applied three variations of reinforcement i.e. retainingwall, pile foundation and combine both of pile foundations and retaining wall. Slope stabilityanalysis was conducted using limit equilibrium method. Based on the analysis conducted onthe three variations reinforcement, combine both of pile foundations and retaining wall morerecommended. Application of and combine both of pile foundations and retaining wall is themost realistic option in consideration of ease of implementation at the field. From thecalculations have been done, in order to achieve stable conditions need retaining wall withdimensions of 2 meters high with 2,5 meters of width. DPT is supported by two piles of eachcross-section with 0.3 meters of diameter along 10 meters with 1-meter in space. Abstrak: Gunung Tugel adalah salah satu daerah yang terletak di Kecamatan PatikrajaKabupaten Banyumas bagian selatan. Kondisi topografi daerah tersebut sebagian besar berupapegunungan dengan kemiringan yang bervariasi dari landai sampai curam. Hal inimenyebabkan banyak daerah di wilayah Gunung Tugel yang berpotensi terjadi bencana tanahlongsor. Pada tahun 2015, peristiwa longsor kembali terjadi di ruas Jalan Gunung Tugel.Kelongsoran yang terjadi sepanjang 70 meter pada separuh badan jalan tersebut menyebabkanarus lalu lintas patikraja-purwokerto menjadi terganggu. Untuk memperbaiki kerusakan jalandan mencegah kelongsoran kembali, diperlukan analisis perkuatan tanah terhadap lerengtersebut. Studi analisis penanggulangan kelongsoran jalan yang terjadi di Gunung Tugel inidilakukan dengan tiga tahapan. Tahapan pertama adalah investigasi lapangan untukmengetahui kondisi lokasi dan dimensi longsor serta mengambil sampel tanah di lapangan.Tahap kedua adalah melakukan pengujian parameter tanah dan analisis data yang diperolehdari lapangan. Tahapan yang terakhir adalah analisis penanggulangan longsor denganmenggunakan data yang diperoleh dari tahapan sebelumnya. Pada penelitan ini, akanditerapkan tiga variasi perkuatan lereng yaitu dinding penahan tanah (DPT), turap dan DPTyang dikombinasikan dengan pondasi tiang. Analisis stabilitas lereng dilakukan dengan metodekeseimbangan batas. Berdasarkan hasil analisis yang dilakukan terhadap ketiga variasiperkuatan, DPT dengan kombinasi tiang pancang lebih direkomendasikan. Penerapan DPTyang dikombinasikan dengan minipile merupakan pilihan yang paling realistis denganpertimbangan tingkat kemudahan pelaksanaan di lapangan. Dari perhitungan yang telahdilakukan, untuk mencapai kondisi stabil diperlukan DPT dengan dimensi tinggi 2 meterdengan lebar bawah 2,5 meter. DPT tersebut ditopang oleh dua tiang tiap penampangmelintang dengan diameter 0,3 meter sepanjang 10 meter dengan jarak antar tiang 1 meter.kata kunci: tanah longsor, perkuatan tanah, metode keseimbangan batas


2008 ◽  
Vol 1 (1) ◽  
pp. 37-46
Author(s):  
Satoshi TAMATE ◽  
Yasuo TOYOSAWA ◽  
Seiji TAKANASHI ◽  
Kazuya ITOH ◽  
Naoaki SUEMASA ◽  
...  

Author(s):  
Ruslan V. Aginey ◽  
◽  
Rustem R. Islamov ◽  
Alexey A. Firstov ◽  
Elmira A. Mamedova ◽  
...  

Existing methods for estimating the bending stresses of buried pipeline section based on the survey data for the depth of the axis of the pipeline from the ground surface are characterized by a large error between the real values of the bending stress and the values of the bending stress obtained from the calculation results based on the survey data. The purpose of this study is to improve the methodology for calculating the bending stresses of buried pipeline section based on the results of determining the depth of the axis of the pipeline from the ground surface, taking into account the design features of the pipeline and the used search equipment. Mathematical models are proposed that allow for the set value of the maximum error in determining bending stresses for a particular pipeline to choose the optimal measurement step before the survey, which will allow to reduce the error. Explanations are given on the choice of the maximum step of the study based on the strength characteristics of the pipeline. A calculation is provided that confirms the adequacy of the developed mathematical models and the possibility of their application in practice.


Sign in / Sign up

Export Citation Format

Share Document