Numerical and Experimental Investigation of Pulsed Laser Welding of Hastelloy C-276 Alloy Sheets

2010 ◽  
Vol 154-155 ◽  
pp. 1468-1471 ◽  
Author(s):  
Yu Quan Guo ◽  
Dong Ming Guo ◽  
Guang Yi Ma ◽  
Dong Jiang Wu
Keyword(s):  
Finite Element ◽  
Parametric Design ◽  
Laser Beam Welding ◽  
Three Dimensional ◽  
Pulsed Laser ◽  
Element Model ◽  
Butt Joint ◽  
Heat Of Fusion ◽  
Pulsed Laser Beam Welding ◽  
Cross Section Profile

In this paper, a three-dimensional finite element model is developed to compute thermal phenomena of 0.5 mm thick Hastelloy C-276 alloy sheets during pulsed laser beam welding (PLBW). Temperature-dependent thermal properties of Hastelloy C-276 alloy, effect of latent heat of fusion, and the convective and radiative boundary conditions are taken into account in the model. The space-time temperature distributions in a butt-joint weld produced by the PLBW process are predicted from the beginning of welding to the final cooling. The heat input to the model is assumed to be a double ellipsoid heat source. The finite element calculations are performed by using ANSYS code with the parametric design capabilities. Experiments were carried out to determine the temperature evolution during welding and to measure the cross section profile of the weld bead. By comparing the simulation results with the corresponding experimental findings, it is found that they are in a good agreement. The validity and applicability of the numerical simulation model are confirmed.

Finite Element Simulation of Temperature Field in Fused Deposition Modeling

2010 ◽  
Vol 97-101 ◽  
pp. 2585-2588 ◽  
Author(s):  
Liang Bo Ji ◽  
Tian Rui Zhou
Keyword(s):  
Finite Element ◽  
Temperature Field ◽  
Fused Deposition Modeling ◽  
Parametric Design ◽  
Three Dimensional ◽  
Physical Property ◽  
Acrylonitrile Butadiene Styrene ◽  
Element Model ◽  
Fused Deposition ◽  
Deposition Modeling

Taking into account temperature-dependent thermal conduction and heat capacity, based in the research on the physical property of the material of Acrylonitrile Butadiene Styrene (ABS), a three-dimensional transient thermal finite element model has been developed in Fused Deposition Modeling (FDM). The moving material of ABS by the sprayer on the mold equipment is simulated with the employment of ANSYS parametric design language (APDL) and latent heat is considered by using enthalpy. By the technique of element live and die on ANSYS software and using the nonlinear finite element method, several conclusions according to the simulation results were produced, first of all, the simulation result shows that the temperature field distribution likes an ellipse; secondly, comparing with the previous track, the latter one has larger heat affected region and larger inhomogeneous temperature distribution; the greatest temperature gradient takes place near the edges of deposited part where the sprayer scanning direction changes.

Finite Element Analysis for the Mega Columns for XRL West Kowloon Terminus

2013 ◽  
Vol 405-408 ◽  
pp. 1139-1143
Author(s):  
Wei Su ◽  
Ying Sun ◽  
Shi Qing Huang ◽  
Ren Huai Liu
Keyword(s):  
Finite Element ◽  
Stress Distribution ◽  
Parametric Design ◽  
Three Dimensional ◽  
Element Model ◽  
Von Mises Stress ◽  
Element Analysis ◽  
Dimensional Finite Element ◽  
Von Mises ◽  
Three Dimensional Finite Element

Using ANSYS parametric design language, a three-dimensional finite element model is developed to analyze the stress distribution and the strength of the mega columns for XRL West Kowloon Terminus. The detailed von Mises stress distribution in each column, vertical stiffener plates and the diaphragm plates is obtained. From the analysis, the phenomenon of stress concentration is obvious in both upper and lower diaphragm plates. The local value of von Mises stress in them is higher than the yield stress value, which must be avoided by more detailed local structural design.

A Sensitivity Study of Structure Behavior of Strengthened Beams for Buried High-Pressure Steel Bifurcation

2011 ◽  
Vol 413 ◽  
pp. 133-137 ◽  
Author(s):  
Yu Ting Lu ◽  
Zhen Zhong Shen ◽  
Li Qun Xu
Keyword(s):  
Finite Element ◽  
High Pressure ◽  
Parametric Design ◽  
Three Dimensional ◽  
Element Model ◽  
Sensitivity Study ◽  
Hydropower Station ◽  
Complex Structures ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

As one of the key structures of hydropower underground projects, buried high-pressure steel bifurcations have complex structures and undefined force states. Based on practical condition of the buried high-pressure steel bifurcation of Sandaowan Hydropower Station, a nonlinear three-dimensional finite element model with parametric design language is established to analyze the changing law of the stress of the lining affected by the dimension of the strengthened beams. It is proposed that to increase the height of the strengthened beams can be reduce the phenomenon of stress concentration effectively in the bifurcation, which can be served as a theory reference for the engineering design and construction.

Torsional Analysis of a Steel Cord-Rubber Tire Belt Structure

1996 ◽  
Vol 24 (4) ◽  
pp. 339-348 ◽  
Author(s):  
R. M. V. Pidaparti
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Composite Structures ◽  
Three Dimensional ◽  
Element Model ◽  
Torsional Stiffness ◽  
Element Analysis ◽  
Rubber Belt ◽  
Steel Cord ◽  
Torsional Analysis

Abstract A three-dimensional (3D) beam finite element model was developed to investigate the torsional stiffness of a twisted steel-reinforced cord-rubber belt structure. The present 3D beam element takes into account the coupled extension, bending, and twisting deformations characteristic of the complex behavior of cord-rubber composite structures. The extension-twisting coupling due to the twisted nature of the cords was also considered in the finite element model. The results of torsional stiffness obtained from the finite element analysis for twisted cords and the two-ply steel cord-rubber belt structure are compared to the experimental data and other alternate solutions available in the literature. The effects of cord orientation, anisotropy, and rubber core surrounding the twisted cords on the torsional stiffness properties are presented and discussed.

Finite Element Analysis of Nonuniformity of Tires with Imperfections5

2007 ◽  
Vol 35 (3) ◽  
pp. 226-238 ◽  
Author(s):  
K. M. Jeong ◽  
K. W. Kim ◽  
H. G. Beom ◽  
J. U. Park
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Radial Force ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Dimensional Finite Element ◽  
Force Variation ◽  
Three Dimensional Finite Element

Abstract The effects of variations in stiffness and geometry on the nonuniformity of tires are investigated by using the finite element analysis. In order to evaluate tire uniformity, a three-dimensional finite element model of the tire with imperfections is developed. This paper considers how imperfections, such as variations in stiffness or geometry and run-out, contribute to detrimental effects on tire nonuniformity. It is found that the radial force variation of a tire with imperfections depends strongly on the geometrical variations of the tire.

scholarly journals Comparison of Tooth- and Bone-Borne Appliances on the Stress Distributions and Displacement Patterns in the Facial Skeleton in Surgically Assisted Rapid Maxillary Expansion—A Finite Element Analysis (FEA) Study

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1152
Author(s):  
Rafał Nowak ◽  
Anna Olejnik ◽  
Hanna Gerber ◽  
Roman Frątczak ◽  
Ewa Zawiślak
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Rapid Maxillary Expansion ◽  
Stress Distributions ◽  
Maxillary Expansion ◽  
Facial Skeleton ◽  
Element Analysis ◽  
Maxillary Constriction

The aim of this study was to compare the reduced stresses according to Huber’s hypothesis and the displacement pattern in the region of the facial skeleton using a tooth- or bone-borne appliance in surgically assisted rapid maxillary expansion (SARME). In the current literature, the lack of updated reports about biomechanical effects in bone-borne appliances used in SARME is noticeable. Finite element analysis (FEA) was used for this study. Six facial skeleton models were created, five with various variants of osteotomy and one without osteotomy. Two different appliances for maxillary expansion were used for each model. The three-dimensional (3D) model of the facial skeleton was created on the basis of spiral computed tomography (CT) scans of a 32-year-old patient with maxillary constriction. The finite element model was built using ANSYS 15.0 software, in which the computations were carried out. Stress distributions and displacement values along the 3D axes were found for each osteotomy variant with the expansion of the tooth- and the bone-borne devices at a level of 0.5 mm. The investigation showed that in the case of a full osteotomy of the maxilla, as described by Bell and Epker in 1976, the method of fixing the appliance for maxillary expansion had no impact on the distribution of the reduced stresses according to Huber’s hypothesis in the facial skeleton. In the case of the bone-borne appliance, the load on the teeth, which may lead to periodontal and orthodontic complications, was eliminated. In the case of a full osteotomy of the maxilla, displacements in the buccolingual direction for all the variables of the bone-borne appliance were slightly bigger than for the tooth-borne appliance.

Reduction of Free-Edge Stress Concentration

1985 ◽  
Vol 52 (4) ◽  
pp. 801-805 ◽  
Author(s):  
P. R. Heyliger ◽  
J. N. Reddy
Keyword(s):  
Finite Element ◽  
Stress Concentration ◽  
Finite Element Model ◽  
Three Dimensional ◽  
Element Model ◽  
Free Edge ◽  
Shear Stresses ◽  
Normal Stresses ◽  
Interlaminar Shear ◽  
Three Dimensional Elasticity

A quasi-three dimensional elasticity formulation and associated finite element model for the stress analysis of symmetric laminates with free-edge cap reinforcement are described. Numerical results are presented to show the effect of the reinforcement on the reduction of free-edge stresses. It is observed that the interlaminar normal stresses are reduced considerably more than the interlaminar shear stresses due to the free-edge reinforcement.

Sign in / Sign up

Export Citation Format

Share Document