Finite Element Simulation of Temperature Field in Fused Deposition Modeling

2010 ◽  
Vol 97-101 ◽  
pp. 2585-2588 ◽  
Author(s):  
Liang Bo Ji ◽  
Tian Rui Zhou
Keyword(s):  
Finite Element ◽  
Temperature Field ◽  
Fused Deposition Modeling ◽  
Parametric Design ◽  
Three Dimensional ◽  
Physical Property ◽  
Acrylonitrile Butadiene Styrene ◽  
Element Model ◽  
Fused Deposition ◽  
Deposition Modeling

Taking into account temperature-dependent thermal conduction and heat capacity, based in the research on the physical property of the material of Acrylonitrile Butadiene Styrene (ABS), a three-dimensional transient thermal finite element model has been developed in Fused Deposition Modeling (FDM). The moving material of ABS by the sprayer on the mold equipment is simulated with the employment of ANSYS parametric design language (APDL) and latent heat is considered by using enthalpy. By the technique of element live and die on ANSYS software and using the nonlinear finite element method, several conclusions according to the simulation results were produced, first of all, the simulation result shows that the temperature field distribution likes an ellipse; secondly, comparing with the previous track, the latter one has larger heat affected region and larger inhomogeneous temperature distribution; the greatest temperature gradient takes place near the edges of deposited part where the sprayer scanning direction changes.

scholarly journals Novel Method for the Manufacture of Complex CFRP Parts Using FDM-based Molds

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2220
Author(s):  
Paul Bere ◽  
Calin Neamtu ◽  
Razvan Udroiu
Keyword(s):  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Acrylonitrile Butadiene Styrene ◽  
The Novel ◽  
Reinforced Polymers ◽  
Fused Deposition ◽  
Molded Parts ◽  
Deposition Modeling ◽  
Composite Tooling ◽  
Novel Method

Fibre-reinforced polymers (FRP) have attracted much interest within many industrial fields where the use of 3D printed molds can provide significant cost and time savings in the production of composite tooling. Within this paper, a novel method for the manufacture of complex-shaped FRP parts has been proposed. This paper features a new design of bike saddle, which was manufactured through the use of molds created by fused deposition modeling (FDM), of which two 3D printable materials were selected, polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS), and these molds were then chemically and thermally treated. The novel bike saddles were fabricated using carbon fiber-reinforced polymer (CFRP), by vacuum bag technology and oven curing, utilizing additive manufactured (AM) molds. Following manufacture the molded parts were subjected to a quality inspection, using non-contact three-dimensional (3D) scanning techniques, where the results were then statistically analyzed. The statistically analyzed results state that the main deviations between the CAD model and the manufactured CFRP parts were within the range of ±1 mm. Additionally, the weight of the upper part of the saddles was found to be 42 grams. The novel method is primarily intended to be used for customized products using CFRPs.

Mechanical and morphological investigations of 3D printed recycled ABS reinforced with bakelite–SiC–Al2O3

2019 ◽  
Vol 233 (17) ◽  
pp. 5933-5944 ◽  
Author(s):  
Rupinder Singh ◽  
Inderpreet Singh ◽  
Ranvijay Kumar
Keyword(s):  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Acrylonitrile Butadiene Styrene ◽  
Morphological Properties ◽  
Fused Deposition ◽  
Software Configuration ◽  
Twin Screw ◽  
Deposition Modeling ◽  
3D Printed ◽  
Commercial Applications

The utilization of thermosetting waste is a serious issue as it is not recycled commercially due to inherent molecular properties and high technology cost. This research details the study of the mechanical behavior and surface analysis with energy-dispersive X-ray spectroscopy and scanning electron microscope of three-dimensional printed parts of the waste thermosetting polymer, bakelite (BAK) as the reinforcement along with ceramic particles (SiC and Al2O3) in recycled thermoplastic acrylonitrile butadiene styrene matrix for sustainability. The process involves twin-screw extrusion for the preparation of filament, followed by 3D printing of functional prototypes on fused deposition modeling setup. The 3D printed parts prepared with fused deposition modeling were used for the testing of mechanical, thermal, and morphological properties. The results of the present study suggests that for commercial applications recycling of thermoplastic up to 10 wt% can be easily performed without a change in any hardware/ software configuration of the fused deposition modeling setup and the ceramic concentration in thermoplastic-thermosetting blends further led to better mechanical and surface properties.

scholarly journals Carbon Nanotube-Based Composite Filaments for 3D Printing of Structural and Conductive Elements

2021 ◽  
Vol 11 (3) ◽  
pp. 1272
Author(s):  
Bartłomiej Podsiadły ◽  
Piotr Matuszewski ◽  
Andrzej Skalski ◽  
Marcin Słoma
Keyword(s):  
Carbon Nanotubes ◽  
Fused Deposition Modeling ◽  
Supply Voltage ◽  
Acrylonitrile Butadiene Styrene ◽  
Structural Elements ◽  
Filling Fraction ◽  
Fused Deposition ◽  
Structural Electronics ◽  
Measured Sample ◽  
Deposition Modeling

In this publication, we describe the process of fabrication and the analysis of the properties of nanocomposite filaments based on carbon nanotubes and acrylonitrile butadiene styrene (ABS) polymer for fused deposition modeling (FDM) additive manufacturing. Polymer granulate was mixed and extruded with a filling fraction of 0.99, 1.96, 4.76, 9.09 wt.% of CNTs (carbon nanotubes) to fabricate composite filaments with a diameter of 1.75 mm. Detailed mechanical and electrical investigations of printed test samples were performed. The results demonstrate that CNT content has a significant influence on mechanical properties and electrical conductivity of printed samples. Printed samples obtained from high CNT content composites exhibited an improvement in the tensile strength by 12.6%. Measurements of nanocomposites’ electrical properties exhibited non-linear relation between the supply voltage and measured sample resistivity. This effect can be attributed to the semiconductor nature of the CNT functional phase and the occurrence of a tunnelling effect in percolation network. Detailed I–V characteristics related to the amount of CNTs in the composite and the supply voltage influence are also presented. At a constant voltage value, the average resistivity of the printed elements is 2.5 Ωm for 4.76 wt.% CNT and 0.15 Ωm for 9.09 wt.% CNT, respectively. These results demonstrate that ABS/CNT composites are a promising functional material for FDM additive fabrication of structural elements, but also structural electronics and sensors.

Development of three-dimensional printing filaments based on poly(lactic acid)/hydroxyapatite composites with potential for tissue engineering

2021 ◽  
pp. 002199832098856
Author(s):  
Marcela Piassi Bernardo ◽  
Bruna Cristina Rodrigues da Silva ◽  
Luiz Henrique Capparelli Mattoso
Keyword(s):  
Tissue Engineering ◽  
Lactic Acid ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Poly Lactic Acid ◽  
Scanning Calorimetry ◽  
Three Dimensional Printing ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
3D Printed

Injured bone tissues can be healed with scaffolds, which could be manufactured using the fused deposition modeling (FDM) strategy. Poly(lactic acid) (PLA) is one of the most biocompatible polymers suitable for FDM, while hydroxyapatite (HA) could improve the bioactivity of scaffold due to its chemical composition. Therefore, the combination of PLA/HA can create composite filaments adequate for FDM and with high osteoconductive and osteointegration potentials. In this work, we proposed a different approache to improve the potential bioactivity of 3D printed scaffolds for bone tissue engineering by increasing the HA loading (20-30%) in the PLA composite filaments. Two routes were investigated regarding the use of solvents in the filament production. To assess the suitability of the FDM-3D printing process, and the influence of the HA content on the polymer matrix, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were performed. The HA phase content of the composite filaments agreed with the initial composite proportions. The wettability of the 3D printed scaffolds was also increased. It was shown a greener route for obtaining composite filaments that generate scaffolds with properties similar to those obtained by the solvent casting, with high HA content and great potential to be used as a bone graft.

scholarly journals On the Post-Processing of 3D-Printed ABS Parts

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1559
Author(s):  
Mohammad Reza Khosravani ◽  
Jonas Schüürmann ◽  
Filippo Berto ◽  
Tamara Reinicke
Keyword(s):  
Surface Treatment ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Acrylonitrile Butadiene Styrene ◽  
Experimental Tests ◽  
Fracture Load ◽  
Post Processing ◽  
Fused Deposition ◽  
Dog Bone ◽  
3D Printed

Application of Additive Manufacturing (AM) has significantly increased in the past few years. AM also known as three-dimensional (3D) printing has been currently used in fabrication of prototypes and end-use products. Considering the new applications of additively manufactured components, it is necessary to study structural details of these parts. In the current study, influence of a post-processing on the mechanical properties of 3D-printed parts has been investigated. To this aim, Acrylonitrile Butadiene Styrene (ABS) material was used to produce test coupons based on the Fused Deposition Modeling (FDM) process. More in deep, a device was designed and fabricated to fix imperfection and provide smooth surfaces on the 3D-printed ABS specimens. Later, original and treated specimens were subjected to a series of tensile loads, three-point bending tests, and water absorption tests. The experimental tests indicated fracture load in untreated dog-bone shaped specimen was 2026.1 N which was decreased to 1951.7 N after surface treatment. Moreover, the performed surface treatment was lead and decrease in tensile strength from 29.37 MPa to 26.25 MPa. Comparison of the results confirmed effects of the surface modification on the fracture toughness of the examined semi-circular bending components. Moreover, a 3D laser microscope was used for visual investigation of the specimens. The documented results are beneficial for next designs and optimization of finishing processes.

Synthesis and properties of modified PBT for FDM

2017 ◽  
Vol 23 (4) ◽  
pp. 804-810 ◽  
Author(s):  
Shiqing Cao ◽  
Dandan Yu ◽  
Weilan Xue ◽  
Zuoxiang Zeng ◽  
Wanyu Zhu
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Fused Deposition Modeling ◽  
Complex Structure ◽  
Three Dimensional ◽  
Sebacic Acid ◽  
Wire Drawing ◽  
Content Type ◽  
Fused Deposition ◽  
Deposition Modeling

Purpose The purpose of this paper is to prepare a new modified polybutylene terephalate (MPBT) for fused deposition modeling (FDM) to increase the variety of materials compatible with printing. And the printing materials can be used to print components with a complex structure and functional mechanical parts. Design/methodology/approach The MPBT, poly(butylene terephalate-co-isophthalate-co-sebacate) (PBTIS), was prepared for FDM by direct esterification and subsequent polycondensation using terephthalic acid (PTA), isophthalic acid (PIA), sebacic acid (SA) and 1,4-butanediol (BDO). The effects of the content of PIA (20-40 mol%) on the mechanical properties of PBTIS were investigated when the mole per cent of SA (αSA) is zero. The effects of αSA (0-7mol%) on the thermal, rheological and mechanical properties of PBTIS were investigated at nPTA/nPIA = 7/3. A desktop wire drawing and extruding machine was used to fabricate the filaments, whose printability and anisotropy were tested by three-dimensional (3D) printing experiments. Findings A candidate content of PIA introducing into PBT was obtained to be about 30 per cent, and the Izod notched impact strength of PBTIS increased with the increase of αSA. The results showed that the PBTIS (nPTA/nPIA = 7/3, αSA = 3-5mol%) is suitable for FDM. Originality/value New printing materials with good Izod notched impact strength were obtained by introducing PIA and SA (nPTA/nPIA = 7/3, αSA = 3-5 mol%) into PBT and their anisotropy are better than that of ABS.

Influence of Part Orientation on the Surface Roughness in the Process of Fused Deposition Modeling

2021 ◽  
Vol 896 ◽  
pp. 29-37
Author(s):  
Ján Milde ◽  
František Jurina ◽  
Jozef Peterka ◽  
Patrik Dobrovszký ◽  
Jakub Hrbál ◽  
...  
Keyword(s):  
Surface Roughness ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Orientation Angle ◽  
Acrylonitrile Butadiene Styrene ◽  
Lower Surface ◽  
Geometrical Model ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Part Orientation

The article focused on the influence of part orientation on the surface roughness of cuboid parts during the process of fabricating by FDM technology. The components, in this case, is simple cuboid part with the dimensions 15 mm x 15mm x 30 mm. A geometrical model is defined that considers the shape of the material filaments after deposition, to define a theoretical roughness profile, for a certain print orientation angle. Five different print orientations in the X-axis of the cuboid part were set: 0°, 30°, 45°, 60°, and 90°. According to previous research in the field of FDM technology by the author, the internal structure (infill) was set at the value of 70%. The method of 3D printing was the Fused Deposition Modeling (FDM) and the material used in this research was thermoplastic ABS (Acrylonitrile butadiene styrene). For each setting, there were five specimens (twenty five prints in total). Prints were fabricated on a Zortrax M200 3D printer. After the 3D printing, the surface “A” was investigated by portable surface roughness tester Mitutoyo SJ-210. Surface roughness in the article is shown in the form of graphs (Fig.7). Results show increase in part roughness with increasing degree of part orientation. When the direction of applied layers on the measured surface was horizontal, significant improvement in surface roughness was observed. Findings in this paper can be taken into consideration when designing parts, as they can contribute in achieving lower surface roughness values.

Fracture assessment of polycarbonate parts produced by fused deposition modeling in the out-of-plane printing direction – effect of raster angle

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Iman Sedighi ◽  
Majid R. Ayatollahi ◽  
Bahador Bahrami ◽  
Marco A. Pérez-Martínez ◽  
Andrés A. Garcia-Granada
Keyword(s):  
Fracture Toughness ◽  
Finite Element ◽  
Fracture Behavior ◽  
Fused Deposition Modeling ◽  
Mode I ◽  
Content Type ◽  
Fused Deposition ◽  
Out Of Plane ◽  
Deposition Modeling ◽  
Fracture Tests

Purpose The purpose of this paper is to study the Mode I fracture behavior of polycarbonate (PC) parts produced using fused deposition modeling (FDM). The focus of this study is on samples printed along the out-of-plane direction with different raster angles. Design/methodology/approach Tensile and Mode I fracture tests were conducted. Semi-circular bend specimens were used for the fracture tests, which were printed in four different raster patterns of (0/90), (15/−75) (30/−60) and (45/−45). Moreover, the finite element method (FEM) was used to determine the applicability of linear elastic fracture mechanics (LEFM) for the printed PC parts. The fracture toughness results, as well as the fracture path and the fracture surfaces, were studied to describe the fracture behavior of the samples. Findings Finite element results confirm that the use of LEFM is allowed for the tested PC samples. The fracture toughness results show that changing the direction of the printed rasters can have an effect of up to 50% on the fracture toughness of the printed parts, with the (+45/−45) and (0/90) orientations having the highest and lowest resistance to crack propagation, respectively. Moreover, except for the (0/90) orientation, the other samples have higher crack resistance compared to the bulk material. The fracture toughness of the tested PC depends more on the toughness of the printed sample, rather than its tensile strength. Originality/value The toughness and the energy absorption capability of the printed samples (with different raster patterns) were identified as the main properties affecting the fracture toughness of the AM PC parts. Because the fracture resistance of almost all the samples was higher than that of the base material, it is evident that by choosing the right raster patterns for 3D-printed parts, very high resistance to crack growth may be obtained. Also, using FEM and comparing the size of the plastic zones, it was concluded that, although the tensile curves show nonlinearity, LEFM is still applicable for the printed parts.

scholarly journals USE OF FUSED DEPOSITION MODELING PROCESS IN INVESTMENT PRECISION CASTING AND RISK OF USING SELECTIVE LASER SINTERING PROCESS

2012 ◽  
pp. 226-230
Author(s):  
SIVADASAN M ◽  
N.K SINGH ◽  
ANOOP KUMAR SOOD
Keyword(s):  
Fused Deposition Modeling ◽  
Selective Laser Sintering ◽  
Thermal Response ◽  
Acrylonitrile Butadiene Styrene ◽  
Laser Sintering ◽  
Precision Casting ◽  
Fused Deposition ◽  
Rp Process ◽  
Deposition Modeling ◽  
Metallic Parts

Investment Castings (IC) is one of the most economical ways to produce intricate metallic parts when forging, forming and other casting processes tend to fail. However, high tooling cost and long lead time associated with the fabrication of metal moulds for producing IC wax (sacrificial) patterns result in cost justification problems for customized single casting or small-lot production. Generating pattern using rapid prototyping (RP) process may be one of the feasible alternatives. For this purpose present study assessed the suitability of the fused deposition modeling (FDM) process for creating sacrificial IC patterns by studying FDM fabricated part thermal response at various temperatures. A series of experiments with RP patterns are conducted and a set of test castings are also made in steel for establishing feasibility. The build material used is acrylonitrile butadiene styrene (ABS). As an annexe to this work a concurrent attempt is also made to quantify the risk in using Selective Laser Sintering patterns for Investment Castings. Authors hope this work might establish applicability of ABS in IC and also lead the investigations to theoretically tone down the shell cracking tendency with Selective Laser Sintering patterns when Proprietary Duraform is used as the build material.

Sign in / Sign up

Export Citation Format

Share Document