Removal of Pollutants from High Polychlorinated Biphenyl Level Contaminated Soil at Different Thermal Treated Time

2011 ◽  
Vol 356-360 ◽  
pp. 1034-1041
Author(s):  
Hai Long Wu ◽  
Sheng Yong Lu ◽  
Xiao Dong Li ◽  
Jian Hua Yan
Keyword(s):  
Removal Efficiency ◽  
Flue Gas ◽  
Polychlorinated Biphenyl ◽  
Solid Phase ◽  
Heating Temperature ◽  
Heating Time ◽  
Gaseous Pollutants ◽  
Treatment Technology ◽  
Volatile Organic ◽  
Quartz Tube Furnace

High contaminated level of polychlorinated biphenyl (PCBs) in soil could not be easily removed by routine method. Since thermal treatment technology becomes a promising method especially for removal of volatile organic compounds, it has not yet been widespread in China for some technical and economic reasons. Experiments were conducted in a horizontal quartz tube furnace with nitrogen as the unique carrier gas, and heating temperature was set at 500oC with retention time of flue gas desorbed from soil was about 1 min. It has been found that total removal efficiency of PCBs from soil increased with the heating time was prolonged. Thermal treated time of 60 min seems suitable for the removal of PCBs, with the removal efficiency of 95.8% in solid phase. It has also been concluded that the removal mechanism of PCBs from soil endures dechlorination and destruction reactions with anticipation of catalytic metals. Normal gaseous pollutants desorbed from soil were also studied, H2O evaporation was favored with at the beginning of thermal process; after H2O evaporation, the organic matters began to decompose; when the thermal treated time was longer than 20 min, the desorption of the normal gaseous pollutants were almost finished (except for NH3).

A Novel Method for the Analysis of Volatile Organic Compounds (VOCs) from Red Flour Beetle Tribolium castaneum (H.) using Headspace-SPME Technology

2020 ◽  
Vol 16 (4) ◽  
pp. 404-412 ◽  
Author(s):  
Ihab Alnajim ◽  
Manjree Agarwal ◽  
Tao Liu ◽  
YongLin Ren
Keyword(s):  
Volatile Organic Compounds ◽  
Organic Compounds ◽  
Tribolium Castaneum ◽  
Solid Phase ◽  
Chemical Signals ◽  
Red Flour Beetle ◽  
Specific Chemical ◽  
Flour Beetle ◽  
Volatile Organic ◽  
Spme Fibre

Background: The red flour beetle, Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae) is one of the world’s most serious stored grain insect pests. A method of early and rapid identification of red flour beetle in stored products is urgently required to improve control options. Specific chemical signals identified as Volatile Organic Compounds (VOCs) that are released by the beetle can serve as biomarkers. Methods: The Headspace Solid Phase Microextraction (HS-SPME) technique and the analytical conditions with GC and GCMS were optimised and validated for the determination of VOCs released from T. castaneum. Results: The 50/30 μm DVB/CAR/PDMS SPME fibre was selected for extraction of VOCs from T. castaneum. The efficiency of extraction of VOCs was significantly affected by the extraction time, temperature, insect density and type of SPME fibre. Twenty-three VOCs were extracted from insects in 4 mL flask at 35 ± 1°C for four hours of extraction and separated and identified with gas chromatography-mass spectroscopy. The major VOCs or chemical signals from T. castaneum were 1-pentadecene, p-Benzoquinone, 2-methyl- and p-Benzoquinone, 2-ethyl. Conclusion: This study showed that HS-SPME GC technology is a robust and cost-effective method for extraction and identification of the unique VOCs produced by T. castaneum. Therefore, this technology could lead to a new approach in the timely detection of T. castaneum and its subsequent treatment.

scholarly journals Study on Ultra-High Temperature Contact Solution Treatment of Al–Zn–Mg–Cu Alloys

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 842
Author(s):  
Wenming Jin ◽  
Jianhao Yu ◽  
Zhiqiang Zhang ◽  
Hongjie Jia ◽  
Mingwen Ren
Keyword(s):  
Heating Temperature ◽  
Solution Treatment ◽  
Strengthening Mechanism ◽  
Heating Time ◽  
Solution Time ◽  
Solution Temperature ◽  
Second Phase ◽  
Total Strength ◽  
Cu Alloys ◽  
Short Heating Time

Contact solution treatment (CST) of Al–Zn–Mg–Cu alloys can shorten solution time to within 40 s in comparison with 1800 s with traditional solution treatment using a heating furnace. Heating temperature is the key factor in solution treatment. Considering the short heating time of CST, the ultra-high solution temperature over 500 °C of Al–Zn–Mg–Cu alloys was studied in this work. The effects of solution temperatures on the microstructures and the mechanical properties were investigated. The evolution of the second phases was explored and the strengthening mechanisms were also quantitatively evaluated. The results showed that solution time could be reduced to 10 s with the solution temperature of 535 °C due to the increasing dissolution rate of the second phase and the tensile strength of the aged specimen could reach 545 MPa. Precipitation strengthening was the main strengthening mechanism, accounting for 75.4% of the total strength. Over-burning of grain boundaries occurred when the solution temperature increased to 555 °C, leading to the deterioration of the strength.

scholarly journals The Stool Volatile Metabolome of Pre-Term Babies

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3341
Author(s):  
Alessandra Frau ◽  
Lauren Lett ◽  
Rachael Slater ◽  
Gregory R. Young ◽  
Christopher J. Stewart ◽  
...  
Keyword(s):  
Early Life ◽  
Solid Phase ◽  
Mass Spectrometry Data ◽  
Gas Chromatography Mass Spectrometry ◽  
Mass Spectral ◽  
Branched Chain Fatty Acids ◽  
Volatile Organic ◽  
Stool Samples ◽  
Branched Chain ◽  
Mixed Modelling

The fecal metabolome in early life has seldom been studied. We investigated its evolution in pre-term babies during their first weeks of life. Multiple (n = 152) stool samples were studied from 51 babies, all <32 weeks gestation. Volatile organic compounds (VOCs) were analyzed by headspace solid phase microextraction gas chromatography mass spectrometry. Data were interpreted using Automated Mass Spectral Deconvolution System (AMDIS) with the National Institute of Standards and Technology (NIST) reference library. Statistical analysis was based on linear mixed modelling, the number of VOCs increased over time; a rise was mainly observed between day 5 and day 10. The shift at day 5 was associated with products of branched-chain fatty acids. Prior to this, the metabolome was dominated by aldehydes and acetic acid. Caesarean delivery showed a modest association with molecules of fungal origin. This study shows how the metabolome changes in early life in pre-term babies. The shift in the metabolome 5 days after delivery coincides with the establishment of enteral feeding and the transition from meconium to feces. Great diversity of metabolites was associated with being fed greater volumes of milk.

PFAS removal from wastewater by in-situ formed ferric nanoparticles: Solid phase loading and removal efficiency

2021 ◽  
Vol 9 (4) ◽  
pp. 105452
Author(s):  
Jianhua Zhang ◽  
Hongjiao Pang ◽  
Stephen Gray ◽  
Shaoheng Ma ◽  
Zongli Xie ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Solid Phase

Numerical Simulation and Process Optimization of Automotive Friction Materials in Warm Pressing Forming

2013 ◽  
Vol 788 ◽  
pp. 57-60
Author(s):  
Chun Cao ◽  
Chun Dong Zhu ◽  
Chen Fu
Keyword(s):  
Process Optimization ◽  
Heating Temperature ◽  
Maximum Energy ◽  
Heating Time ◽  
Product Performance ◽  
Forming Process ◽  
Friction Materials ◽  
Forming Technology ◽  
The Relationship ◽  
Temperature Heating

Warm pressing forming technology has been gradually applied to the forming of automotive friction materials. How to ensure product performance to achieve the target at the same time achieve the maximum energy saving is the research focus of this study. In this paper, by using finite element method, the field of automotive friction materials in warm pressing forming was analyzed, reveals the relationship between the temperature field and the heating temperature/heating time. Furthermore, the energy consumption was analyzed and compared it with hot pressing forming process. The results will have significant guiding to the process optimization in warm pressing forming.

scholarly journals Characterization of Volatile Organic Compounds in Mango Ginger (Curcuma amada Roxb.) from Myanmar

Metabolites ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 21
Author(s):  
Yanhang Chen ◽  
Musavvara Kh. Shukurova ◽  
Yonathan Asikin ◽  
Miyako Kusano ◽  
Kazuo N. Watanabe
Keyword(s):  
Solid Phase ◽  
Species Variation ◽  
Mango Ginger ◽  
Food Industries ◽  
Curcuma Amada ◽  
Alternative Medicines ◽  
Flight Mass Spectrometry ◽  
Volatile Organic ◽  
Loss Of Appetite

Curcuma amada Roxb. (Zingiberaceae), commonly known as mango ginger because its rhizome and foliar parts have a similar aroma to mango. The rhizome has been widely used in food industries and alternative medicines to treat a variety of internal diseases such as cough, bronchitis, indigestion, colic, loss of appetite, hiccups, and constipation. The composition of the volatile constituents in a fresh rhizome of C. amada is not reported in detail. The present study aimed to screen and characterize the composition of volatile organic compound (VOC) in a fresh rhizome of three C. amada (ZO45, ZO89, and ZO114) and one C. longa (ZO138) accessions originated from Myanmar. The analysis was carried out by means of headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography-time-of-flight-mass spectrometry (GC-TOF-MS). As a result, 122 VOCs were tentatively identified from the extracted 373 mass spectra. The following compounds were the ten most highly abundant and broadly present ones: ar-turmerone, α-zingiberene, α-santalene, (E)-γ-atlantone, cuparene, β-bisabolene, teresantalol, β-sesquiphellandrene, trans-α-bergamotene, γ-curcumene. The intensity of ar-turmerone, the sesquiterpene which is mainly characterized in C. longa essential oil (up to 15.5–27.5%), was significantly higher in C. amada accession ZO89 (15.707 ± 5.78a) compared to C. longa accession ZO138 (0.300 ± 0.08b). Cis-α-bergamotene was not detected in two C. amada accessions ZO45 and ZO89. The study revealed between-species variation regarding identified VOCs in the fresh rhizome of C. amada and C. longa.

Sign in / Sign up

Export Citation Format

Share Document