Transfer Zone Characteristics in No. II Fault Zone and its Control on Petroleum, TaZhong Area

2011 ◽  
Vol 356-360 ◽  
pp. 3009-3015
Author(s):  
Yu Hang Zhang ◽  
Xing Yan Li ◽  
Zhi Feng Yan

According to interpreted cautiously with 2D and 3D seismic profiles, the typical transfer zone was identified in No.Ⅱ fault zone of TaZhong area, near the TaZhong 46 well of central uplift belt in Tarim basin. Discussed the transfer zone characteristic on the basis of seismic interpretation, it’s clearly triangle transfer zone and caused by strike-slip affection. Using structural analysis method, it is indicated that the transfer zone composed by thrusting-detachment faults. According to structural evolution analysis, the transfer zone had been affecting constantly by transpression during the caledonian-late hercynian, Analyzing geologic setting and regional geology characteristic, TaZhong No.Ⅱ fault zone are sinistral transpression strike-slip fault. Analysis the control action of transfer zone’s for trap, reservoir, hydrocarbon migration and sedimentary, the Transfer zone have the advantage target for oil and gas exploration.

2021 ◽  
Author(s):  
Huang Zhen ◽  
Yang Bo ◽  
Li Guoying ◽  
Ren Jian ◽  
Wang Xiaoling

Abstract Laizhouwan sag in Bohai Bay basin is a fault basin controlled by extensional fault depression and strike slip pull apart, which is an important oil and gas exploration area in Bohai Bay. Exploration practice shows that the prediction of high quality reservoir is the core problem of exploration in this area. Based on the analysis of drilling, seismic data and structural physical simulation in Laizhouwan depression, this paper analyzes the structural deformation under the stress field of strike slip extensional superposition, and points out the dynamic source controlled sand model in the strike slip extensional superposition area. Firstly, The structural response of "pressure relief settlement, pressure boosting uplift" under the mechanism of strike slip extension stress superposition stress is the root cause of block uplift drop alternation transformation. As a result, the southern slope zone of Laizhouwan depression shows the structural pattern of early uplift and late uplift in the East and early uplift and late uplift in the west, forming a "seesaw" structural evolution pattern. Secondly, the unique paleogeomorphology controls the orderly distribution of sedimentary system in time and space. In the Paleocene, the east uplifted, forming a local provenance system. In the denudation area above the slope break developed fracture weathering shell type reservoirs, and the subsidence area under the slope break developed fan delta deposits; In the early Eocene, the relatively flat platform palaeogeomorphology was developed, which created favorable conditions for the development of mixed sedimentary body of lacustrine carbonate and delta; At the end of Eocene, the West was pressurized and uplifted, the East was released and subsided, and the braided river delta sediments of Western provenance were developed. Under the guidance of this recognition, the hidden dynamic provenance was successfully identified in the study area.


2020 ◽  
Vol 27 (1) ◽  
pp. petgeo2019-144
Author(s):  
Ziyi Wang ◽  
Zhiqian Gao ◽  
Tailiang Fan ◽  
Hehang Zhang ◽  
Lixin Qi ◽  
...  

The SB1 strike-slip fault zone, which developed in the north of the Shuntuo Low Uplift of the Tarim Basin, plays an essential role in reservoir formation and hydrocarbon accumulation in deep Ordovician carbonate rocks. In this research, through the analysis of high-quality 3D seismic volumes, outcrop, drilling and production data, the hydrocarbon-bearing characteristics of the SB1 fault are systematically studied. The SB1 fault developed sequentially in the Paleozoic and formed as a result of a three-fold evolution: Middle Caledonian (phase III), Late Caledonian–Early Hercynian and Middle–Late Hercynian. Multiple fault activities are beneficial to reservoir development and hydrocarbon filling. In the Middle–Lower Ordovician carbonate strata, linear shear structures without deformation segments, pull-apart structure segments and push-up structure segments alternately developed along the SB1 fault. Pull-apart structure segments are the most favourable areas for oil and gas accumulation. The tight fault core in the centre of the strike-slip fault zone is typically a low-permeability barrier, whilst the damage zones on both sides of the fault core are migration pathways and accumulation traps for hydrocarbons, leading to heterogeneity in the reservoirs controlled by the SB1 fault. This study provides a reference for hydrocarbon exploration and development of similar deep-marine carbonate reservoirs controlled by strike-slip faults in the Tarim Basin and similar ancient hydrocarbon-rich basins.


2021 ◽  
Author(s):  
Adam J. Cawood ◽  
David A. Ferrill ◽  
Alan P. Morris ◽  
David Norris ◽  
David McCallum ◽  
...  

<p>The Orphan Basin on the eastern edge of the Newfoundland continental margin formed as a Mesozoic rift basin prior to continental breakup associated with the opening of the North Atlantic. Few exploration wells exist in the basin, and until recently regional interpretations have been based on sparse seismic data coverage - because of this the structural evolution of the Orphan Basin has historically not been well understood. Key uncertainties include the timing and amount of rift-related extension, dominant extension directions, and the structural styles that accommodated progressive rift development in the basin.     </p><p>Interpretation of newly acquired modern broadband seismic data and structural restoration of three regional, WNW-ESE oriented cross-sections across the Orphan Basin and Flemish Cap provide new insights into rift evolution and structural style in the area. Our results show that major extension in the basin occurred between 167 Ma and 135 Ma, with most extension occurring prior to 151 Ma. We show that extension after 135 Ma largely occurred east of Flemish Cap due to a shift in the locus of rifting from the Orphan Basin to east of Flemish Cap. We find no evidence for discrete rifting events in the Orphan Basin, as has been suggested by other authors.  Kinematic restoration and associated heave measurements for the Orphan Basin show that extension was both widespread and relatively evenly distributed across the basin from Middle-Late Jurassic to Early Cretaceous.</p><p>We provide evidence for more widespread deposition of Jurassic strata throughout the Orphan Basin than previously interpreted, and show that Jurassic deposition was controlled by the occurrence and displacement of crustal-scale extensional detachment faults.  Structure in the three regional cross sections is dominated by large-scale, shallowly dipping extensional detachment faults. These faults mainly dip to the northwest and control the geometry and position of extensional basins – grabens and half-grabens – which occur at a range of scales. Stacked detachment surfaces, hyperextension, and attenuation of the crust are observed in central and eastern parts of the Orphan Basin. Zones of extreme crustal attenuation (to ca. 3.7 km) are interpreted to be coincident with large-displacement (up to 60 km) low-angle detachments. Results from crustal area balancing suggest that up to 41% of extension is not recognized through structural seismic interpretation, which we attribute to subseismic-scale ductile and brittle deformation, and uncertainties in the identification of detachment surfaces or complex structural configurations (e.g., overprinting of early extensional deformation).</p><p>Rifting style in the central, northern, and eastern parts of the Orphan Basin is dominated by low-angle detachment faulting with maximum extension perpendicular to the incipient rift axis. In contrast, structural geometries in the southwestern part of the basin are suggestive of transtensional deformation, and interplay of normal and strike-slip faulting.  Results from map-based interpretation show that strike-slip faults within this transtensional zone are associated with displacement transfer between half-grabens of opposing polarity, rather than regional strike-slip displacement.  These structures are interpreted as contemporaneous and kinematically linked to displacement along low-angle detachment surfaces elsewhere, and are not attributed to distinct episodes of oblique extension.       </p>


2017 ◽  
Vol 17 (12) ◽  
pp. 2335-2350 ◽  
Author(s):  
Sonja H. Wadas ◽  
David C. Tanner ◽  
Ulrich Polom ◽  
Charlotte M. Krawczyk

Abstract. In November 2010, a large sinkhole opened up in the urban area of Schmalkalden, Germany. To determine the key factors which benefited the development of this collapse structure and therefore the dissolution, we carried out several shear-wave reflection-seismic profiles around the sinkhole. In the seismic sections we see evidence of the Mesozoic tectonic movement in the form of a NW–SE striking, dextral strike-slip fault, known as the Heßleser Fault, which faulted and fractured the subsurface below the town. The strike-slip faulting created a zone of small blocks ( < 100 m in size), around which steep-dipping normal faults, reverse faults and a dense fracture network serve as fluid pathways for the artesian-confined groundwater. The faults also acted as barriers for horizontal groundwater flow perpendicular to the fault planes. Instead groundwater flows along the faults which serve as conduits and forms cavities in the Permian deposits below ca. 60 m depth. Mass movements and the resulting cavities lead to the formation of sinkholes and dissolution-induced depressions. Since the processes are still ongoing, the occurrence of a new sinkhole cannot be ruled out. This case study demonstrates how S-wave seismics can characterize a sinkhole and, together with geological information, can be used to study the processes that result in sinkhole formation, such as a near-surface fault zone located in soluble rocks. The more complex the fault geometry and interaction between faults, the more prone an area is to sinkhole occurrence.


2020 ◽  
Author(s):  
Levent Tosun ◽  
Elif Çakır ◽  
Bora Uzel ◽  
Ökmen Sümer ◽  
Atilla Arda Özacar ◽  
...  

&lt;p&gt;The present tectonic framework of the Western Anatolia has been dominated by two major deformations. The first one is the product of the slab-edge processes related to the convergence between Eurasian and African plates along with the Aegean-Cyprean subduction system since the Oligocene, and the second one is the westwards escape of Anatolian Block along the North Anatolian Fault Zone (NAFZ) since the late Miocene. The first one resulted in a widespread extensional deformation in the Western Anatolia and the Aegean region and is associated with slab-detachment and slab-tear processes that gave rise to the development of dynamic topography and various core-complexes (e.g., Cyclades and Menderes). Recent studies have shown that the deferential extensional strain between the core complexes in the region has been accommodated by strike-slip dominated transfer zones, the &amp;#304;zmir-Bal&amp;#305;kesir Transfer Zone (&amp;#304;BTZ), which developed (sub)parallel to the extension direction and accommodate differential extension and rotational deformation in the region. The second one gave way to the development of a complex strike-slip deformation pattern and an array of pull-apart basin complexes throughout the northern margin of the Anatolian Block. The NAFZ and &amp;#304;BTZ interact around the Bal&amp;#305;kesir-Bursa region resulting in a very peculiar deformation style due to partitioning of strain between these major structures.&lt;br&gt;This study aims at unraveling how the strain partitioning operates between &amp;#304;BTZ and NAFZ and to reveal the kinematic constraints that produced the present tectonic scheme in the region. The geometry and kinematics of the faults are determined by analyzing 2773 fault slip data obtained from 49 sites evenly distributed throughout the study area. The preliminary results show that the &amp;#304;zmir-Bal&amp;#305;kesir Transfer Zone localized after Miocene with the decoupling of strike-slip faults, and to the episodic exhumation of the metamorphic core complexes. The focal mechanism solutions of the recent earthquakes support this decoupling and manifest the seismic activity of the &amp;#304;BTZ. This study is supported by a T&amp;#252;bitak Project, Grant Number of 117R011.&lt;/p&gt;


2019 ◽  
Vol 7 (1) ◽  
pp. T1-T19 ◽  
Author(s):  
RenHai Pu ◽  
KunBai Li ◽  
Machao Dong ◽  
ZiCheng Cao ◽  
Pengye Xu

The eastern part of Tazhong area in the Tarim Basin consists of three sets of vertical strike-slip faults oriented in north–northeast (36°azimuth), east–northeast (68° azimuth), and west–northwest (126°azimuth) directions that cut the strata from Cambrian to Carboniferous. The fault belts indicate significant horizon upwarp and downwarp deformations and variations in their stratigraphic thickness on seismic profiles. Through detailed interpretation of the 3D seismic data, we consider that these phenomena reflect the different stress properties and active stages of the faults. The horizon upwarp and downwarp within the fault belts correlated respectively to the decrease and increase in stratigraphic thickness within the fault belts in comparison to the coeval counterpart of the bilateral fault blocks. For the same fault, different stratigraphic intervals express different types of horizon deformation and thickness changes. The horizon downwarp and the contemporaneous stratigraphic thickening inside the fault belts suggest the transtensional actions of the fault. The horizon upwarp and the contemporaneous thinning within the fault belts suggest transpressional actions of the fault. Based on this, we inferred the active periods of the three sets of strike-slip faults. The north–northeast-striking faults were formed in the late Ordovician Sangtamu Formation. This set of faults experienced four stages, i.e., sinistral transpression, sinistral transtension, static, and transtension. The east–northeast and west–northwest-striking faults initiated in the mid-Cambrian period as coupled transtension. Activity ceased in the west–northwest faults after the mid-Cambrian and in the east–northeast faults during the late Ordovician. The three sets of strike-slip faults all affect the formation of the hydrothermal dissolution reservoirs that are distributed in the Ordovician carbonate rocks.


2020 ◽  
Vol 17 (6) ◽  
pp. 956-966
Author(s):  
Longjun Qiu ◽  
Zhaoxi Chen ◽  
Yalei Liu

Abstract Kwanza basin, located on the west coast of Africa and the east side of the South Atlantic Ocean, has the potential for deep-water oil and gas exploration. Previous studies have shown that the pre-salt system within the area has high potential for oil and gas storage. However, due to the shielding effect of the evaporating salt rock during the Aptian period, the quality of seismic reflection profiles of the pre-salt layers is poor. This means that the pre-salt sequences, the main fault, the scale and distribution pattern of the rift are not clear. To clarify the pre-salt regional structure pattern and further guide pre-salt exploration, we carried out a series of analyses and target processing of seismic and gravity data. Further, combining other available geological and lithology data as well as a tectonic model, we put forward a new understanding of the pre-salt structure of Kwanza basin. The research shows that the Kwanza basin can be divided into three uplift belts below the salt layer, which are distributed in the NW–SE trending direction. The three key profiles illustrate the distribution of uplift and depression in detail. The explained structural highs distributed in the outer Kwanza basin may be related to oil and gas reservoir. This study could provide the geophysical basis for the re-interpretation of the pre-salt seismic sequence, the strategic selection of pre-salt oil and gas and the next exploration deployment.


2011 ◽  
Vol 186 (3) ◽  
pp. 963-970 ◽  
Author(s):  
Yaron Finzi ◽  
Elizabeth H. Hearn ◽  
Vladimir Lyakhovsky ◽  
Lutz Gross

2020 ◽  
Author(s):  
Jun Wei Pang ◽  
Jyr-Ching Hu

&lt;p&gt;Zagros foreland basin is the most important oil-gas foreland basin in the world. At least 60 oil and gas fields have been found. Therefore, research in this area will enrich the petroleum geological information of the foreland basin as an important basis for oil and gas exploration. First, we conduct 2D restoration of Lorestan salient in North Zagros Mountain Belt with 2DMove to test the rationality of the equilibrium profile and understand the structural evolution of the Lorestan salient. Base on the 2D restoration, faults evolved in the ways of in-sequence and out-of-sequence, many faults have breached the cover layer from basement then produced anticline, in the earlier stage of deformation. Anaran anticline and Kabir Kuh anticline caused by the thrusts that displacement along the thrust are 5769 m and 11496 m, respectively. The Vardalan, Dareh Baneh and Naft Anticline also produced by the basement thrust later, this result suggest that surface topography and anticline are highly associated with basement thrust. Second, using the Move2017-Surface to establish the 3D structural model to observe the lateral variation of the strata, some strata have lateral variation, the Mishan formation is absent in the NW but gradually appear to the SE and the Triassic carbonates thickness decreases from almost 1000 m in the southwest to 200 m in the northeast. This reduction in thickness may associated with late Triassic normal faulting and erosion. Third, we project the earthquake on the cross section to understanding the relation between earthquake distribution and tectonic patterns. Based on the analysis of seismicity and geological profiles, earthquake focal mechanisms are mostly reverse faulting with NW&amp;#8211;SE strikes and the distribution is over whole horizontal Zagros belt but concentrated in depth of 5~16 km. In addition, larger magnitude earthquakes mainly distribute in southwest Lorestan, it implies that it is the main regime of active tectonics.&lt;/p&gt;


2019 ◽  
Vol 26 (3) ◽  
pp. 373-385 ◽  
Author(s):  
Manzar Fawad ◽  
Nazmul Haque Mondol ◽  
Irfan Baig ◽  
Jens Jahren

Rock physics analyses of data from a wildcat well 7117/9-1 drilled in the Senja Ridge area, located in the Norwegian Barents Sea, reveal changes in stiffness within the fine-grained Paleogene Sotbakken Group sediments, caused by the transformation of opal-A to opal-CT, and opal-CT to quartz. These changes manifest as flat spots on 2D seismic profiles. These flat spots were mistaken as hydrocarbon–water contacts, which led to the drilling of well 7117/9-1. Rock physics analyses on this well combined with a second well (7117/9-2) drilled further NW and updip on the Senja Ridge indicate overpressure within the opal-CT-rich zones overlying the opal-CT to quartz transformation zones in the two wells. The absence of opal-A–opal-CT and opal-CT–quartz flat spots on seismic in the second well is attributed to differences in the temperature and timing of uplift. Amplitude v. angle (AVA) modelling indicates both the opal-A–opal-CT and opal-CT–quartz interface points plot on the wet trend, whereas modelled gas–brine, oil–brine and gas–oil contacts fall within quadrant-I. These findings will be useful in understanding the nature of compaction of biogenic silica-rich sediments where flat spots could be misinterpreted as hydrocarbon-related contacts in oil and gas exploration.


Sign in / Sign up

Export Citation Format

Share Document