Preparation of Polyaniline Supported TiO2 Photocatalyst and its Photocatalytic Property

2011 ◽  
Vol 356-360 ◽  
pp. 524-528 ◽  
Author(s):  
Chun Ling Yu ◽  
Rui Xue Wu ◽  
Ying Huan Fu ◽  
Xiao Li Dong ◽  
Hong Chao Ma
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Process ◽  
Photocatalytic Property ◽  
Visible Spectrum ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
Anthraquinone Dye ◽  
X Ray ◽  
Transmission Electron ◽  
Uv Visible

A polyaniline supported titanium dioxide photocatalyst was prepared by an impregnation-hydrothermal process and characterized by powder X-ray diffraction, transmission electron microscopy and UV-visible spectroscopy. It was found that the TiO2 nanoparticles were well dispersed on the surface of the polyaniline and the photocatalyst has a stronger absorption compared with that of pure TiO2 over the whole of the visible spectrum. The photocatalyst exhibited higher photocatalytic activity than pure TiO2 for the photodegradation of solutions of the anthraquinone dye, reactive brilliant blue KN-R, under visible light irradiation.

A Facile Method for the Synthesis of Silver Nanoparticles in the Presence of Sodium Phosphate

2011 ◽  
Vol 109 ◽  
pp. 174-177 ◽  
Author(s):  
Yu Li Shi ◽  
Qi Zhou ◽  
Li Yun Lv ◽  
Wang Hong
Keyword(s):  
Electron Microscopy ◽  
Silver Nanoparticles ◽  
Sodium Phosphate ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Stabilizing Agents ◽  
Transmission Electron ◽  
Silver Nps ◽  
Uv Visible

A facile method for the synthesis of silver nanoparticles (NPs) has been developed by using sodium phosphate (Na3PO4) as stabilizing agents and glucose the reducing agent, respectively. The obtained silver NPs have been characterized by X-ray diffraction (XRD), UV-visible spectroscopy (UV-vis) and transmission electron microscopy (TEM). It was found that in the presence of sodium phosphate, silver NPs with different morphologies and sizes were obtained. The formation mechanism of diverse silver NPs was studied preliminarily.

Study on integration of aluminum-doped zinc oxide (AZO) thin films with graphene oxide (GO)

2018 ◽  
Vol 32 (19) ◽  
pp. 1840044
Author(s):  
Aditya Dalal ◽  
Animesh Mandal ◽  
Shubhada Adhi ◽  
Kiran Adhi
Keyword(s):  
Thin Films ◽  
Raman Spectroscopy ◽  
Graphene Oxide ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Aluminum Doped Zinc Oxide ◽  
Uv Visible

Aluminum (0.5 at.%)-doped ZnO (AZO) thin films were deposited by pulsed laser deposition technique (PLD) in oxygen ambient of 10[Formula: see text] Torr. The deposited thin films were characterized by x-ray diffraction (XRD), photoluminescence (PL), Raman spectroscopy and uv–visible spectroscopy (UV–vis). Next, graphene oxide (GO) was synthesized by Hummers method and was characterized by XRD, UV–vis spectroscopy, Raman spectroscopy and transmission electron microscopy (TEM). Thereafter, GO solution was drop-casted on AZO thin films. These films were then characterized by Raman Spectroscopy, UV–vis spectroscopy and PL. Attempt is being made to comprehend the modifications in properties brought about by integration.

Synthesis of ZnO with Different Morphology and its Photocatalytic Property

2011 ◽  
Vol 110-116 ◽  
pp. 547-552 ◽  
Author(s):  
Yu Xin Wang ◽  
Jing Xu ◽  
Xing Guo Cheng ◽  
Hong Fang Xu ◽  
Li Jun Liu
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Photocatalytic Property ◽  
Zno Nanostructures ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Zno Nanomaterials ◽  
Scanning Electron

ZnO nanostructures with different morphology have been successfully fabricated by a simple relative low temperature approach at 90 °C for 5 h without surfactant assistance. These structures can be easily tailed using varied concentrations of sodium hydroxide (NaOH) and different amounts of the hydrazine hydrate (N2H4·H2O). X-ray diffraction (XRD) result proves the formation of ZnO with wurtzite structure. Microstructure as revealed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicates that the rod-like and chrysanthemum-like ZnO nanostructures contain many radial nanorods, which grow along the [0001] direction. Furthermore, the as-prepared ZnO nanomaterials exhibit high activity on the photo-catalytic degradation of typical persistent organic pollutants (POPs), indicating that they are promising as semiconductor photo-catalysts.

scholarly journals The High Photocatalytic Activity of SnO2Nanoparticles Synthesized by Hydrothermal Method

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Pham Van Viet ◽  
Cao Minh Thi ◽  
Le Van Hieu
Keyword(s):  
Photocatalytic Activity ◽  
Hydrothermal Method ◽  
High Photocatalytic Activity ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Uv Illumination ◽  
Transmission Electron ◽  
Uv Visible ◽  
Tin Oxide Nanoparticles

Tin oxide nanoparticles (SnO2NPs) were prepared at low temperature by hydrothermal method. Synthesized SnO2NPs were confirmedviacharacterization techniques such as UV-visible spectroscopy (UV-vis), X-ray diffraction (XRD), and Transmission Electron Microscope (TEM). The synthesized nanoparticles were in the size of 3 nm and they have high photocatalytic activity. The result showed that SnO2NPs degraded 88.88% MB solution after 30 minutes of UV illumination and reached 90.0% for 120 minutes (2 hours) of UV illumination. Moreover, they degraded 79.26% MB solution after 90 minutes (1.5 hours) under assisted sunlight illumination.

Ordered Mesoporous SBA-15 for Controlled Release of Water-Insolube Drug

2011 ◽  
Vol 236-238 ◽  
pp. 1873-1876 ◽  
Author(s):  
Jun Jie Tao ◽  
Yun Qiang Xu ◽  
Guo Wei Zhou ◽  
Cui Cui Wu ◽  
Hong Bin Song ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Controlled Release ◽  
Hydrothermal Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Mesoscopic Structure ◽  
Ordered Mesoporous ◽  
Adsorption Desorption ◽  
Phosphate Buffered Saline

Ordered mesoporous SBA-15 was synthesized through hydrothermal process under acidic condition. The material was characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), small-angle X-ray diffraction (SAXRD), and N2 adsorption-desorption. The results indicated that SBA-15 has 2-dimensional hexagonal p6mm mesoscopic structure and well-ordered parallel mesochannel. The as-obtained mesoporous silica was used for controlled release of water-insolube drug emodin. The loading capacity could achieve 6.64 mg/g, and the release profiles that studied in phosphate buffered saline (PBS, pH = 7.4) showed that released amount of emodin was 95.8 % after 48 h.

Mixed-Solvothermal Preparation of Mace-Like CdS Nanocrystals

2012 ◽  
Vol 502 ◽  
pp. 164-168
Author(s):  
Ling Xu ◽  
Han Mei Hu ◽  
Hai Yan Xu
Keyword(s):  
Electron Microscopy ◽  
Large Scale ◽  
Volume Ratio ◽  
X Ray Diffraction ◽  
Visible Absorption ◽  
X Ray ◽  
Transmission Electron ◽  
Cds Nanostructures ◽  
Uv Visible ◽  
Solvothermal Preparation

Novel mace-like (wolf-teeth clubs) CdS nanostructures were successfully prepared on a large scale using CdCl2•2.5H2O and NH2CSNH2 as starting materials through a convenient mixed-solvothermal route. The as-synthesized products were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectrometry (EDX), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and UV-visible absorption spectroscopy. The experimental results reveal that the morphology of CdS products was greatly affected by the volume ratio of anhydrous ethanol and distilled water. The possible mechanism for the formation of mace-like CdS nanostructures is simply discussed.

Hydrothermal Synthesis and Electrocatalytic Property for H2O2 Reduction of Co3O4 Nanocubes

2011 ◽  
Vol 311-313 ◽  
pp. 477-480
Author(s):  
Zhi Ai Yang ◽  
Li Jin Feng ◽  
Xia Wang ◽  
Rong Ma ◽  
Jian Ping Sun ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Process ◽  
Linear Sweep Voltammetry ◽  
Average Crystallite Size ◽  
X Ray Diffraction ◽  
Linear Sweep ◽  
Electrocatalytic Property ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Subscript textThe Co3O4 nanocubes were synthesized by hydrothermal process. The products are characterized in detail by multiform techniques: scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and energy-dispersive X-ray analysis. The results show that the products are uniform nanocubes with an average crystallite size about 20-40 nm. Electrocatalytic property of the prepared Co3O4 nanocubes was characterized by linear sweep voltammetry. LSV results indicate that Co3O4 nanocubes exhibit a remarkable electrocatalytic activity for the H2O2 reduction.

Biosynthesis of silver nanoparticles using lavender leaf and their applications for catalytic, sensing, and antioxidant activities

2016 ◽  
Vol 5 (6) ◽  
Author(s):  
Brajesh Kumar ◽  
Kumari Smita ◽  
Luis Cumbal
Keyword(s):  
Silver Nanoparticles ◽  
Leaf Extract ◽  
Antioxidant Activities ◽  
Present Report ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Transmission Electron ◽  
Red Color ◽  
Uv Visible

AbstractThe present report summarizes an eco-friendly approach for the biosynthesis of silver nanoparticles (AgNPs) using the leaf extract of lavender. Initially, the synthesis of AgNPs was visually observed by the appearance of a wine red color. The optical property, morphology, and structure of as-synthesized AgNPs were characterized by UV-visible spectroscopy, dynamic light scattering, transmission electron microscopy, and X-ray diffraction analyses. All characterization data revealed the formation of crystalline and spherical AgNPs (Ag/Ag

Optical and Structural Properties of PVP/Bi2S3 Nanoparticles by Chemical Method

2013 ◽  
Vol 678 ◽  
pp. 248-252
Author(s):  
K. Kavi Rasu ◽  
Dhandapani Vishnushankar ◽  
V. Veeravazhuthi
Keyword(s):  
Electron Microscopy ◽  
Diffraction Spectrum ◽  
X Ray Diffraction ◽  
Sem Images ◽  
X Ray ◽  
Ir Studies ◽  
Transmission Electron ◽  
Ft Ir ◽  
Crystalline Nature ◽  
Uv Visible

Bismuth sulfide (Bi2S3) and Polyvinyl pyrrolidone (PVP) encapsulated Bi2S3 Nanoparticles are synthesized from aqueous solutions at room temperature. Synthesized samples are subjected to UV-Visible Spectroscopy, X-Ray Diffraction (XRD), Scanning electron microscopy (SEM), Energy Dispersive Analysis of X-ray (EDAX), Transmission Electron Microscopy (TEM) and FT-IR studies and their results are compared. X-ray diffraction spectrum reveals the crystalline nature of the synthesized samples. Grain size value of PVP/ Bi2S3 nanoparticles show a decrease when compared to Bi2S3 nanoparticles and this ensures the good encapsulant effect of PVP on Bi2S3 nanoparticles. SEM images show that all the particles in the synthesized sample are nearly equal in size. From the TEM image we conclude that the particle size lies between 30nm to 70nm. Finally the samples are subjected to EDAX studies for determining their composition.

Hydrothermal Synthesis and Photocatalytic Properties of TiO2/SnS2 Nanocomposite

2014 ◽  
Vol 898 ◽  
pp. 23-26
Author(s):  
Jing Li ◽  
Wei Sun ◽  
Wei Min Dai ◽  
Yong Cai Zhang
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance ◽  
Photocatalytic Property ◽  
Deionized Water ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Chloride Pentahydrate

TiO2/SnS2 nanocomposite was synthesized via hydrothermal treatment of tin (IV) chloride pentahydrate, thioacetamide and TiO2 nanotubes in deionized water at 150 °C for 3 h. The structure, composition and optical property of the as-synthesized nanocomposite were characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, transmission electron microscopy and UV-vis diffuse reflectance spectra, and its photocatalytic property was tested in the reduction of aqueous Cr6+ under visible-light (λ > 420 nm) irradiation. It was observed that TiO2 nanotubes exhibited no photocatalytic activity, whereas TiO2/SnS2 nanocomposite exhibited photocatalytic activity in the reduction of aqueous Cr6+ under visible-light (λ > 420 nm) irradiation.

Sign in / Sign up

Export Citation Format

Share Document