Fabrication of Rice Husk Ash/Natural Rubber Composite

2011 ◽  
Vol 393-395 ◽  
pp. 92-96 ◽  
Author(s):  
Zong Qiang Zeng ◽  
He Ping Yu ◽  
Hong Chao Liu ◽  
Shuang Quan Liao ◽  
Zheng Peng
Keyword(s):  
Mechanical Properties ◽  
Rare Earth ◽  
Natural Rubber ◽  
Rice Husk ◽  
Coupling Agent ◽  
Rice Husk Ash ◽  
Testing Machine ◽  
Dynamic Mechanical Properties ◽  
Main Trend ◽  
Dynamic Mechanical

The preparation of rubber-based composite from agricultural by-product is the main trend to upgrade the performance of rubber and reduce the cost. In this work, the rice husk ash/natural rubber (RHA/NR) composites were prepared by latex mixing process using the RHA modified with rare earth coupling agent. The mechanical properties, dynamic mechanical properties, thermal stability and morphology of RHA/NR composites were analyzed by universal testing machine, dynamic mechanical analyzer, thermo gravimetric analyzer and scanning electron microscope. The results indicate that previous modification of RHA with rare earth coupling agent can improve the dispersion of RHA in NR matrix significantly and increase the interaction between RHA particles and NR matrix and thus upgrade the mechanical properties and anti-oxidative behaviors of RHA/NR composite. The RHA/NR composite of highest mechanical properties and anti-oxidative behaviors can be obtained with a RHA loading of 4 per hundred rubber.

Mechanical and dynamic mechanical properties of rice husk ash-filled natural rubber compounds

2002 ◽  
Vol 83 (11) ◽  
pp. 2331-2346 ◽  
Author(s):  
H. M. Da Costa ◽  
L. L. Y. Visconte ◽  
R. C. R. Nunes ◽  
C. R. G. Furtado
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Dynamic Mechanical Properties ◽  
Dynamic Mechanical ◽  
Rubber Compounds

scholarly journals Effect of Silane Treatment Methods on Physical Properties of Rice Husk Flour/Natural Rubber Composites

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Ladawan Srisuwan ◽  
Kasama Jarukumjorn ◽  
Nitinat Suppakarn
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Rice Husk ◽  
Treatment Method ◽  
Dynamic Mechanical Properties ◽  
Morphological Properties ◽  
Silane Treatment ◽  
Treatment Methods ◽  
Dynamic Mechanical ◽  
Rice Husk Flour

In this study, the effect of silane treatment methods on cure characteristics and mechanical, dynamic mechanical, and morphological properties of rice husk flour (RHF)/natural rubber (NR) composites was investigated. The RHF surface was pretreated with alkali solution and then treated with bis(triethoxysilylpropyl) tetrasulfide (TESPT) solution using the unwashing silane treatment method and washing silane treatment method. The expected difference between these two methods was the silane layers presented on the RHF surface. Unwashed TESPT-treated RHF (UW-ST) and washed TESPT-treated RHF (W-ST) were incorporated into NR to prepare RHF/NR composites. The TESPT molecules deposited on UW-ST and W-ST surfaces were confirmed by the additional peaks appeared in the FTIR spectra of UW-ST and W-ST. In addition, the decrement of decomposition temperatures and the changes in the residue amounts of UW-ST and W-ST proved the removal of the physisorbed silane layers after washing. The presence of TESPT molecules on the RHF surface enhanced compatibility and adhesion between RHF and NR matrix. This was confirmed by SEM micrographs of both UW-ST/NR and W-ST/NR composites. This result was also supported by the improvement of the mechanical and the dynamic mechanical properties of these two composites. According to mechanical properties of the NR composites, the washing silane treatment method was more effective than the unwashing silane treatment method for compatibility improvement between RHF and NR. The modulus, tensile strength, and tear strength of W-ST/NR composites can be enhanced without deterioration of their elongation at break.

scholarly journals Styrene–Acrylic Emulsion with “Transition Layer” for Damping Coating: Synthesis and Characterization

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1406
Author(s):  
Daoyuan Chen ◽  
Mingjin Ding ◽  
Zhixiong Huang ◽  
Yanbing Wang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Transition Layer ◽  
Testing Machine ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Latex Film ◽  
Seeded Emulsion Polymerization ◽  
Acrylic Emulsion ◽  
Dynamic Mechanical

In order to study the dynamic mechanical properties of styrene–acrylic latex with a core/shell structure, a variety of latexes were synthesized by semi-continuous seeded emulsion polymerization based on “particle design” with the same material. The latexes were characterized by rotary viscosimeter, dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), transmission electron microscope (TEM), dynamic mechanical analysis (DMA), and universal testing machine. The effects of difference at the glass transition temperature (Tg) of core and shell and the introduction of the “transition layer” on the damping and mechanical properties of latex film were studied. The results indicate that as the Tg of core and shell gets closer, the better the compatibility of core and shell, from phase separation to phase continuity. Furthermore, the introduction of the “transition layer” can effectively improve the tensile strength and tan δ (max) of the latex film. The tensile strength and maximum loss factor (f = 1 Hz) of latex with the “transition layer” increased by 36.73% and 29.11% respectively compared with the latex without the “transition layer”. This work provides a reference for the design of emulsion for damping coating.

Dynamic Mechanical Properties of Grafted Polypropylene Composites Reinforced with Acetylated Wheat Straw Fibers

2015 ◽  
Vol 1767 ◽  
pp. 139-143
Author(s):  
Ramón Sánchez ◽  
Jacobo Aguilar ◽  
Silvia Y. Martínez ◽  
Reyes J. Sanjuan ◽  
Gerardo A. Mejía ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Wheat Straw ◽  
Coupling Agent ◽  
Optical Microscope ◽  
Dynamic Mechanical Properties ◽  
Particle Sizes ◽  
Polypropylene Composites ◽  
Dynamic Mechanical ◽  
Twin Screw ◽  
Composite Pellets

ABSTRACTDynamic mechanical properties of polypropylene (PP) and grafted polypropylene (PP-g-MA) composites reinforced with acetylated wheat straw fibers (WSF) is reported in this work. The materials were prepared with different fiber particle sizes (40, 80 and 140 U.S. mesh) and at different fiber contents (5, 10 and 15 wt.%). The PP and PP-g-MA composites, where anhydride maleic (MA) was used as coupling agent, were obtained using a twin-screw extruder; whereas an injection-molding machine molded the composite pellets into testing specimens. To observe the morphology of the composites, micrographs were taken with an optical microscope. The Dynamic mechanical properties were analyzed using a torsional rheometer. The morphological analysis showed a high porous structure somehow similar to foamed materials. The storage modulus (G′) increased by increasing the fiber content, and decreased with fiber particle sizes for the PP composites. Meanwhile, the use of the coupling agent additive promoted a modulus increase due to higher fiber-polymer interaction, from better adhesion and chemical bonds formation between the fibers-coupling agent-PP.

scholarly journals Study on Dynamic Mechanical Properties and Constitutive Model Construction of TC18 Titanium Alloy

Metals ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 44 ◽  
Author(s):  
Changming Zhang ◽  
Anle Mu ◽  
Yun Wang ◽  
Hui Zhang
Keyword(s):  
Mechanical Properties ◽  
Titanium Alloy ◽  
Flow Stress ◽  
Yield Strength ◽  
Constitutive Model ◽  
Testing Machine ◽  
Dynamic Mechanical Properties ◽  
Stress Strain ◽  
Dynamic Mechanical ◽  
Different Temperatures

In order to investigate the static and dynamic mechanical properties of TC18 titanium alloy, the quasi-static stress–strain curve of TC18 titanium alloy under room temperature was obtained by DNS 100 electronic universal testing machine (Changchun Institute of Mechanical Science Co., Ltd., Changchun, China). Meanwhile, the flow stress–strain curves under different temperatures and strain rates are analyzed by split Hopkinson pressure bar (SHPB) device with synchronous assembly system. On the basis of the two experimental data, the JC constitutive model under the combined action of high temperature and impact load is established using the linear least squares method. The results show the following: the yield strength and flow stress of TC18 titanium alloy increase slowly with the increase of the strain rate, and the strain value corresponding to the yield strength is reduced. With the increase of strain, the flow stress increases at first and then decreases at different temperatures. The strain value corresponding to the transition point rises with the temperature increase, and the corresponding stress value remains basically unchanged. With the increase of experimental temperature, the flow stress shows a downward trend, and the JC constitutive model can predict the plastic flow stress well.

Sign in / Sign up

Export Citation Format

Share Document