Preparation of ZnO Nanopowders by One-Step Hydrothermal Synthesis

2011 ◽  
Vol 412 ◽  
pp. 21-24
Author(s):  
Yan Xiang Wang ◽  
Jian Sun ◽  
Xiao Yan Li
Keyword(s):  
Polyethylene Glycol ◽  
Raw Materials ◽  
Zno Nanorods ◽  
Synthesis Temperature ◽  
Soft Template ◽  
Peg 400 ◽  
Zno Nanosheets ◽  
Length Width ◽  
One Step ◽  
Soft Templates

In the paper, ZnO nanopowders were synthesized by using zinc acetate and sodium hydroxide as raw materials. The influences of different soft templates and synthesis temperature on the properties of ZnO nanopowders were investigated. The results showed that: when using the polyethylene glycol (PEG (400)) or polyvinyl alcohol (PVA) as soft template, the ZnO nanoparticles with the diameter about 100nm were obtained, whereas the ZnO nanorods which the length and diameter were 300nm and 150nm respectively were obtained without soft template. When the synthesis temperature was 220°C and 70°C, the ZnO nanorods were obtained. When the temperature was 100°C, the ZnO nanosheets were produced, and the length, width and thickness of ZnO nanosheets were about 800 nm, 500nm and 80nm, respectively. When the temperature was 90°C, the ZnO nanosheets composed with nanorods were prepared.

One-Step Hydrothermal Synthesis and Characterization of ZnO Nanopowders

2011 ◽  
Vol 110-116 ◽  
pp. 1928-1933 ◽  
Author(s):  
Yan Xiang Wang ◽  
Xiao Yan Li ◽  
Jian Sun ◽  
Yao Hui Hu
Keyword(s):  
Hydrothermal Synthesis ◽  
Raw Materials ◽  
Zno Nanorods ◽  
Synthesis Temperature ◽  
Molar Concentration ◽  
Zno Nanosheets ◽  
Length Width ◽  
One Step ◽  
Lower Temperature

In the paper, ZnO nanopowders were synthesized by one-step hydrothermal synthesis using zinc acetate and sodium hydroxide as raw materials. The influences of molar concentration of NaOH and synthesis temperature on the properties of ZnO nanopowders were investigated. XRD and FSEM were used to characterize ZnO nanopowders. The results showed that; when the molar concentration of NaOH was 0.05 mol/L, 1mol/L and 2mol/L, ZnO micrometer powders were obtained. When the molar concentration of NaOH was 4mol/L, ZnO nanorods or nanosheets were obtained with different reaction temperature. When the temperature was 220°C, ZnO nanorods with the length of 500nm and diameter of 100nm, were synthesised. Pure ZnO nanopowders can be obtained at lower temperature of 100°C by using one-step hydrothermal synthesis. When the synthesis temperature was 100°C and the molar concentration of NaOH was 4mol/L, ZnO nanosheets were produced. The length, width and thickness of ZnO nanosheets were about 800 nm, 500nm and 80nm, respectively.

LiFePO4/C Cathode Materials Prepared by One-Step Fast Carbothermal Method Using Fe2O3 as Raw Materials

2013 ◽  
Vol 773 ◽  
pp. 709-713
Author(s):  
Bao Hua Rong ◽  
Yan Wen Lu ◽  
Qing Lin Chen ◽  
Kun Tang ◽  
Xue Wen Liu ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Raw Materials ◽  
Synthesis Temperature ◽  
Cycle Performance ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Sintering Atmosphere ◽  
X Ray ◽  
One Step ◽  
Carbothermal Method

LiFePO4/C was successfully synthesized by one-step solid-state reaction using Fe2O3, LiH2PO4 and sucrose as raw materials. The effect of synthesis temperature and sintering atmosphere on the electrochemical performance were investigated. LiFePO4/C materials were characterized by differential scanning calorimetry and thermogravimetry, X-ray diffraction, scanning electron microscopy and XPS. The results show that the synthesis temperature between 750 °C and 800 °C were appropriate and the reductive ambience can enhance the electrochemical performance effectively especially at high rates. The precursor calcined at 750°C for 5h in a N2+5%H2 atmosphere exhibited the highest discharge capacity of 155 mAh/g at 0.1C and 141 mAh/g at 1C and showed the best cycle performance.

One Step to Prepare Ag/PPy Composites with Different Soft Templates

2013 ◽  
Vol 742 ◽  
pp. 158-161
Author(s):  
Mei Li ◽  
Hong Wei Teng ◽  
Wen Guang Li ◽  
Jun Liu ◽  
Ying Kai Liu
Keyword(s):  
Sodium Dodecyl Sulfate ◽  
Sulfonic Acid ◽  
Resistivity Measurement ◽  
Sodium Dodecyl ◽  
Soft Template ◽  
Naphthalene Sulfonic Acid ◽  
One Step ◽  
Polymerization Method ◽  
Soft Templates

Ag/PPy composites were prepared in β-naphthalene sulfonic acid (β-NSA) or sodium dodecyl sulfate (SDS) aqueous solutions with AgNO3 as oxidant. β-NSA or SDS acted as dopant and soft template in the process of preparing polypyrrole (PPy) by in situ oxidizing polymerization method. SEM, TEM, FTIR, XRD and Four-Point Probes Resistivity Measurement System were tested respectively and results indicated that the obtained Ag/PPy composites displayed different morphology,structure and conducting characteristic.

A Simple Approach to the One-Pot Three Component Synthesis of 4Hpyrimido [2,1-b] benzothiazole Derivatives Using Polyethylene Glycol (PEG-400)

2015 ◽  
Vol 12 (3) ◽  
pp. 197-204 ◽  
Author(s):  
Prabhakar Rairala ◽  
Bandi Yadagiri ◽  
Rajashaker Bantu ◽  
Vijayacharan Guguloth ◽  
Lingaiah Nagarapu
Keyword(s):  
Polyethylene Glycol ◽  
Simple Approach ◽  
One Pot ◽  
Benzothiazole Derivatives ◽  
Peg 400 ◽  
The One

Extraction of polyethylene glycols with dicarbolide solutions in nitrobenzene

1990 ◽  
Vol 55 (8) ◽  
pp. 1959-1967 ◽  
Author(s):  
Petr Vaňura ◽  
Pavel Selucký
Keyword(s):  
Polyethylene Glycol ◽  
Molecular Mass ◽  
Extraction Constant ◽  
Metal Extraction ◽  
Polyethylene Glycols ◽  
Relative Molecular Mass ◽  
Published Data ◽  
Average Molecular Mass ◽  
Peg 400 ◽  
Extraction Constants

The extraction of polyethylene glycol of average molecular mass 400 (PEG 400) with dicarbolide solution in nitrobenzene and of longer-chain polyethylene glycol, of average molecular mass 1 500 (PEG 1 500), with chlorinated dicarbolide solution in nitrobenzene was studied. During the extraction of PEG 400, the polyethylene glycol solvates the Horg+ ion in the organic phase giving rise to the HLorg+ species (L is polyethylene glycol). The obtained value of the extraction constant Kex(HLorg+) = 933 is consistent with published data of metal extraction. Extraction of PEG 1 500 was treated applying the simplified assumption that the thermodynamic behaviour of PEG 1 500 is the same as that of n molecules of polyethylene glycol with relative molecular mass 1 500/n, each solvating one cation. For this model, the value of n = 3.2 ± 1.1 and the values of the extraction constants of the HL1/n,org+ and HL2/n,org+ species were obtained by using the adapted program LETAGROP. This value of n is consistent with published extraction data in the presence of polyethylene glycol with a relative molecular mass from 200 to 1 000.

Soft template-mediated coupling construction of sandwiched mesoporous PPy/Ag nanoplates for rapid and selective NH3 sensing

2021 ◽  
Vol 9 (13) ◽  
pp. 8308-8316
Author(s):  
Facai Wei ◽  
Yonghui Zhong ◽  
Hao Luo ◽  
Yong Wu ◽  
Jianwei Fu ◽  
...  
Keyword(s):  
Chemical Sensing ◽  
Liquid Interface ◽  
Soft Template ◽  
One Step ◽  
Construction Strategy ◽  
Sensing Performance

We propose a facile soft template-mediated coupling construction strategy for one-step fabrication of sandwiched mesoporous PPy/Ag nanoplates at the liquid interface, and the hybrid showed great chemical sensing performance for NH3 gas.

A One-Step Synthesis of Monoprotected Polyethylene Glycol Ethers

2000 ◽  
Vol 65 (18) ◽  
pp. 5843-5845 ◽  
Author(s):  
Neal N. Reed ◽  
Kim D. Janda
Keyword(s):  
Polyethylene Glycol ◽  
Glycol Ethers ◽  
One Step

ChemInform Abstract: Polyethylene Glycol (PEG-400): A Mild and Efficient Reaction Medium for One-Pot Synthesis of 3-Hydroxy-3-(pyridin-2-ylmethyl)indolin-2-ones.

ChemInform ◽  
2013 ◽  
Vol 44 (42) ◽  
pp. no-no
Author(s):  
M. Raghu ◽  
M. Rajasekhar ◽  
B. Chandra Obula Reddy ◽  
C. Suresh Reddy ◽  
B. V. Subba Reddy
Keyword(s):  
Polyethylene Glycol ◽  
Reaction Medium ◽  
One Pot ◽  
Peg 400 ◽  
One Pot Synthesis

Synthesis and Application of Itaconic Acid Water-Coke Slurry Dispersant

2017 ◽  
Vol 896 ◽  
pp. 167-174 ◽  
Author(s):  
Zhi Yuan Yang ◽  
Zhuo Yue Meng ◽  
Zhi Hua Li ◽  
Si Tong Wang
Keyword(s):  
Surface Tension ◽  
Polyethylene Glycol ◽  
Itaconic Acid ◽  
High Performance ◽  
Ph Value ◽  
Raw Materials ◽  
Esterification Reaction ◽  
Solution Ph ◽  
Powder Surface ◽  
Coke Powder

Polyethylene glycol (PEG-200) and itaconic acid (IA) were used as raw materials to compound macromer through esterification reaction. A new type of specialized water-coke slurry dispersant was synthesized by copolymerization of microware, sodium methallyl sulfonate (SMAS) and maleic anhydride (MA). The experiment showed that the concentration of slurry could be reached to 63% with the dosage of 0.2%, and the apparent viscosity was 1140.3 mPa∙s. Through the analysis of the infrared, the dispersant was confirmed to have polyethylene glycol branched chain and hydrophilic functional groups such as carboxyl or sulfonic group. When the concentration of dispersant was 30 g/L, the surface tension of water could be decreased from 72.70 mN/m to 45.50 mN/m. Furthermore, when the solution pH value was 9, the Zeta potential of semi-coke powder surface could also be decreased from-13.38 mV to-25 mV with the addition of dispersant. Thus, this dispersant could increase electronegativity of semi-coke powder surface, enhance steric-hindrance effect and prevent the phenomenon of powder flocculation and gather. Meantime, it also could reinforce the semi-coke hydrophilic by reducing the surface tension of water effectively. And then, the high performance water-coke slurry could be obtained.

Sign in / Sign up

Export Citation Format

Share Document