Effect of Solid Solution on the Microstructure and Performance of Nuclear Power Slot Wedge Copper Alloy

2011 ◽  
Vol 415-417 ◽  
pp. 1107-1113
Author(s):  
Yu Song Xu ◽  
Na Na Lin ◽  
Ya Li Jiao
Keyword(s):  
Copper Alloy ◽  
Nuclear Power ◽  
Solution Treatment ◽  
Hot Extrusion ◽  
Fracture Morphology ◽  
Scientific Basis ◽  
Heating Process ◽  
Power Generator ◽  
And Performance ◽  
Nuclear Power Generator

According to the working conditions of the nuclear power generator slot wedge and the principle of the heat treatment, CuCo2BeZr copper alloy was strengthened by a series of heating process test, finally acquired a good performance of the nuclear power slot wedge. The results show that, after the process of hot extrusion deformation of 85.5% and solution treatment at (940±10 )°C for 2h, then aging at 540 °C for 4h, the composition, microstructure, fracture morphology and tensile properties of CuCo2BeZr copper alloy, as the material of nuclear power generator, could meet the conditions of working continuously in high temperature enviroment.The research of CuCo2BeZr copper alloy provide scientific basis for analyzing the inner mechanism of the failure and predicting the working life of the nuclear power slot wedge material.

Rancang Bangun Alat Olahan Minyak Kelapa

2016 ◽  
Vol 10 (1) ◽  
pp. 70-77
Author(s):  
Jantri Sirait ◽  
Sulharman Sulharman
Keyword(s):  
Electric Motor ◽  
Performance Test ◽  
Production Capacity ◽  
Coconut Oil ◽  
Heating Time ◽  
Design Tool ◽  
Coconut Milk ◽  
Heating Process ◽  
And Performance ◽  
Time Required

Has done design tool is a tool of refined coconut oil coconut grater, squeezer coconut milk and coconut oil heating, with the aim to streamline the time of making coconut oil and coconut oil increase production capacity. The research method consists of several stages, among others; image creation tool, procurement of materials research, cutting the material - the material framework of tools and performance test tools. The parameters observed during the performance test tools is time grated coconut, coconut milk bleeder capacity, the capacity of the boiler and the heating time of coconut oil. The design tool consists of three parts, namely a tool shaved coconut, coconut milk wringer and coconut milk heating devices. Materials used for the framework of such tools include iron UNP 6 meters long, 7.5 cm wide, 4 mm thick, while the motor uses an electric motor 0.25 HP 1430 rpm and to dampen the rotation electric motor rotation used gearbox with a ratio of round 1 : 60. the results of the design ie the time required for coconut menyerut average of 297 seconds, coconut milk wringer capacity of 5 kg of processes and using gauze pads to filter coconut pulp, as well as the heating process takes ± 2 hours with a capacity of 80 kg , The benefits of coconut oil refined tools are stripping time or split brief coconut average - average 7 seconds and coconut shell can be used as craft materials, processes extortion coconut milk quickly so the production capacity increased and the stirring process coconut oil mechanically.ABSTRAKTelah dilakukan rancang bangun alat olahan minyak kelapa yaitu alat pemarut kelapa, pemeras santan kelapa dan pemanas minyak kelapa, dengan tujuan untuk mengefisiensikan waktu pembuatan minyak kelapa serta meningkatkan kapasitas produksi minyak kelapa. Metode penelitian terdiri dari beberapa tahapan antara lain; pembuatan gambar alat, pengadaan bahan-bahan penelitian, pemotongan bahan - bahan rangka alat dan uji unjuk kerja alat. Parameter yang diamati pada saat uji unjuk kerja alat adalah waktu parut kelapa, kapasitas pemeras santan kelapa, kapasitas tungku pemanas serta waktu pemanasan minyak kelapa. Rancangan alat terdiri dari tiga bagian yaitu alat penyerut kelapa, alat pemeras santan kelapa dan alat pemanas santan kelapa. Bahan yang dipergunakan untuk rangka alat tersebut  yaitu besi UNP panjang 6 meter, lebar 7,5 cm, tebal 4 mm, sedangkan untuk motor penggerak menggunakan motor listrik 0,25 HP 1430 rpm dan untuk meredam putaran putaran motor listrik dipergunakan gearbox  dengan perbandingan putaran 1 : 60. Hasil dari rancangan tersebut yaitu waktu yang dibutuhkan untuk menyerut kelapa rata-rata 297 detik, kapasitas alat pemeras santan kelapa 5 kg sekali proses dan menggunakan kain kassa untuk menyaring ampas kelapa, serta Proses pemanasan membutuhkan waktu ± 2 jam dengan kapasitas 80 kg. Adapun keunggulan alat olahan minyak kelapa ini adalah waktu pengupasan atau belah kelapa singkat rata – rata 7 detik dan tempurung kelapa dapat digunakan sebagai bahan kerajinan, proses pemerasan santan kelapa cepat sehingga kapasitas produksi meningkat dan proses pengadukan minyak kelapa secara mekanis. Kata kunci : penyerut, pemeras, pemanas,minyak kelapa,olahan minyak kelapa.

scholarly journals BRAIN AND EYE AS POTENTIAL TARGETS FOR IONIZING RADIATION IMPACT. Part І. THE CONSEQUENCES OF IRRADIATION OF THE PARTICIPANTS OF THE LIQUIDATION OF THE CHORNOBYL ACCIDENT

2020 ◽  
Vol 25 ◽  
pp. 90-129
Author(s):  
K. Loganovsky ◽  
◽  
P. Fedirko ◽  
K. Kuts ◽  
D. Marazziti ◽  
...  
Keyword(s):  
Ionizing Radiation ◽  
Neurodegenerative Diseases ◽  
Nuclear Power ◽  
Radiation Effects ◽  
Radiation Risk ◽  
International Studies ◽  
Neurocognitive Deficit ◽  
Radiation Induced ◽  
And Performance ◽  
Medical Radiology

Background.Exposure to ionizing radiation could affect the brain and eyes leading to cognitive and vision impairment, behavior disorders and performance decrement during professional irradiation at medical radiology, including interventional radiological procedures, long-term space flights, and radiation accidents. Objective. The objective was to analyze the current experimental, epidemiological, and clinical data on the radiation cerebro-ophthalmic effects. Materials and methods. In our analytical review peer-reviewed publications via the bibliographic and scientometric bases PubMed / MEDLINE, Scopus, Web of Science, and selected papers from the library catalog of NRCRM – the leading institution in the field of studying the medical effects of ionizing radiation – were used. Results. The probable radiation-induced cerebro-ophthalmic effects in human adults comprise radiation cataracts, radiation glaucoma, radiation-induced optic neuropathy, retinopathies, angiopathies as well as specific neurocognitive deficit in the various neuropsychiatric pathology including cerebrovascular pathology and neurodegenerative diseases. Specific attention is paid to the likely stochastic nature of many of those effects. Those prenatally and in childhood exposed are a particular target group with a higher risk for possible radiation effects and neurodegenerative diseases. Conclusions. The experimental, clinical, epidemiological, anatomical and pathophysiological rationale for visual system and central nervous system (CNS) radiosensitivity is given. The necessity for further international studies with adequate dosimetric support and the follow-up medical and biophysical monitoring of high radiation risk cohorts is justified. The first part of the study currently being published presents the results of the study of the effects of irradiation in the participants of emergency works at the Chornobyl Nuclear Power Plant (ChNPP). Key words: ionizing radiation, cerebroophthalmic effects, neurocognitive deficit, radiation accident, radiation cataracts, macular degeneration.

Accelerated Discovery and Design of Nano-Material Applications in Nuclear Power by Using High Performance Scientific Computing

2015 ◽  
pp. 83-118
Author(s):  
Liviu Popa-Simil
Keyword(s):  
Nuclear Power ◽  
High Performance ◽  
Scientific Computing ◽  
Material Behavior ◽  
Nano Materials ◽  
Macro Scale ◽  
Material Systems ◽  
Nano Material ◽  
And Performance

The accelerated development of nano-sciences and nano-material systems and technologies is made possible through the use of High Performance Scientific Computing (HPSC). HPSC exploration ranges from nano-clusters to nano-material behavior at mezzo-scale and specific macro-scale products. These novel nano-materials and nano-technologies developed using HPSC can be applied to improve nuclear devices' safety and performance. This chapter explores the use of HPSC.

scholarly journals Analysis and Mitigation of Subsynchronous Resonance in a Korean Power Network with the First TCSC Installation

Energies ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2847 ◽  
Author(s):  
Minh-Quan Tran ◽  
Minh-Chau Dinh ◽  
Seok-Ju Lee ◽  
Jea-In Lee ◽  
Minwon Park ◽  
...  
Keyword(s):  
Power Systems ◽  
Nuclear Power ◽  
Operating Conditions ◽  
Power Generator ◽  
Subsynchronous Resonance ◽  
Thyristor Controlled Series Capacitor ◽  
Electrical Damping ◽  
Svr Controller ◽  
System Configurations ◽  
Series Capacitor

This paper presents a detailed analysis results of the effect of a thyristor-controlled series capacitor (TCSC) on subsynchronous resonance (SSR), which was first applied to a Korean power system. First, the TCSC parameters were calculated, the structure of TCSC with synchronous voltage reversal (SVR) controller was presented, and the torsional characteristics of Hanul nuclear power generator rotor were studied to investigate the natural frequency and mode shape. The test signal method was used to determine the electrical damping in the frequency range of SSR operation through an electromagnetic transient analysis program in various system configurations. The SSR phenomenon was analyzed by comparing the electrical and mechanical damping of a conventional fixed series capacitor (FSC), and the case of a TCSC installed, and the effectiveness of the TCSC without any risk of SSR was demonstrated. As a result, when installing FSC, SSR occurred under sensitive operating conditions, but SSR was prevented in the case of TCSC compensation with SVR. The results obtained in this study can be effectively applied to the installation of TCSC in real power systems.

Beta-titanium biomedical alloy: effect of thermal processing on mechanical properties

2012 ◽  
Vol 57 (3) ◽  
pp. 753-757 ◽  
Author(s):  
K.V. Sudhakar ◽  
K. Konen ◽  
K. Floreen
Keyword(s):  
Mechanical Properties ◽  
Titanium Alloy ◽  
Testing Machine ◽  
Solution Treatment ◽  
High Strength ◽  
Fracture Morphology ◽  
Beta Titanium Alloy ◽  
Beta Titanium ◽  
Digital Microscope ◽  
Aging Conditions

A new β-titanium alloy (Ti-3Al-5V-6Cr-3Mo-3Zr) was investigated as a function of heat treatment to evaluate its mechanical properties. The cold drawn beta-titanium alloy was subjected to β-annealing as well as solution treatment and aging treatments. The mechanical properties were evaluated using MTS Landmark-servo hydraulic Universal Testing Machine. The beta-titanium alloy demonstrated an excellent combination of strength and ductility for both β-annealing and solution treatment and aging conditions. The influence of thermal treatments on microstructure was studied with HiRox digital microscope. The fracture morphology investigated revealed predominantly cup and cone/dimpled fracture surface features demonstrating excellent toughness in addition to high strength and low stiffness that are suitable for biomedical applications.

scholarly journals Importance of Advanced Planning of Manufacturing for Nuclear Industry

2016 ◽  
Vol 7 (2) ◽  
pp. 42-49
Author(s):  
Nick Shykinov ◽  
Robert Rulko ◽  
Dariusz Mroz
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Regulatory Compliance ◽  
Pressure Vessels ◽  
Nuclear Industry ◽  
Project Schedule ◽  
Nuclear Facilities ◽  
Project Completion ◽  
Advanced Planning ◽  
And Performance

Abstract In the context of energy demands by growing economies, climate changes, fossil fuel pricing volatility, and improved safety and performance of nuclear power plants, many countries express interest in expanding or acquiring nuclear power capacity. In the light of the increased interest in expanding nuclear power the supply chain for nuclear power projects has received more attention in recent years. The importance of the advanced planning of procurement and manufacturing of components of nuclear facilities is critical for these projects. Many of these components are often referred to as long-lead items. They may be equipment, products and systems that are identified to have a delivery time long enough to affect directly the overall timing of a project. In order to avoid negatively affecting the project schedule, these items may need to be sourced out or manufactured years before the beginning of the project. For nuclear facilities, long-lead items include physical components such as large pressure vessels, instrumentation and controls. They may also mean programs and management systems important to the safety of the facility. Authorized nuclear operator training, site evaluation programs, and procurement are some of the examples. The nuclear power industry must often meet very demanding construction and commissioning timelines, and proper advanced planning of the long-lead items helps manage risks to project completion time. For nuclear components there are regulatory and licensing considerations that need to be considered. A national nuclear regulator must be involved early to ensure the components will meet the national legal regulatory requirements. This paper will discuss timing considerations to address the regulatory compliance of nuclear long-lead items.

Sign in / Sign up

Export Citation Format

Share Document