Study of Sol-Gel Auto-Combustion Method Prepare Ni0.6-xZn0.4MgxFe2O4

2012 ◽  
Vol 463-464 ◽  
pp. 1052-1056
Author(s):  
Ai Xiang Zeng ◽  
Jun Yuan
Keyword(s):  
Crystal Structure ◽  
Zinc Ferrite ◽  
Single Phase ◽  
Sol Gel ◽  
Combustion Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nickel Zinc ◽  
Auto Combustion ◽  
Scanning Electron

Ni0.6-xZn0.4MgxFe2O4were synthesized by sol-gel auto-combustion method with Zn(NO3.) 2 •6H2O. , Ni(NO3.) )2•6H2O. , Mg(NO3.) )2•6H2O. , Fe(NO3.) )3•9H2O. , COOO2. and NH3•H2O. X-ray diffraction (XRD) analysises show that the sample is single phase and the doping of magnesium makes no difference to nickel-zinc ferrite’s crystal structure; nickel-zinc ferrite has formed after auto-combustion. Scanning electron microscope analysises show that after sintered the sample’s size is more even and the doping of magnesium makes the size smaller and more even too.

scholarly journals Y3+ substituted Sr-hexaferrites: sol-gel synthesis, structural, magnetic and electrical characterization

Cerâmica ◽  
2019 ◽  
Vol 65 (374) ◽  
pp. 274-281 ◽  
Author(s):  
S. S. Satpute ◽  
S. R. Wadgane ◽  
S. R. Kadam ◽  
D. R. Mane ◽  
R. H. Kadam
Keyword(s):  
Electron Microscopy ◽  
Sol Gel ◽  
Electrical Characterization ◽  
Combustion Method ◽  
Hexagonal Structure ◽  
Strontium Hexaferrite ◽  
X Ray Diffraction ◽  
X Ray ◽  
Morphological Studies ◽  
Auto Combustion

Abstract Y3+ substituted strontium hexaferrites having chemical composition SrYxFe12-xO19 (x= 0.0, 0.5, 1.0, 1.5) were successfully synthesized by sol-gel auto-combustion method. The structural and morphological studies of prepared samples were investigated by using X-ray diffraction technique, energy dispersive X-ray spectroscopy, field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy. The X-ray diffraction pattern confirmed the single-phase hexagonal structure of yttrium substituted strontium ferrite and the lattice parameters a and c increased with the substitution of Y3+ ions. The crystallite size also varied with x content from 60 to 80 nm. The morphology was studied by FE-SEM, and the grain size of nanoparticles ranged from 44 to 130 nm. The magnetic properties were investigated by using vibrating sample magnetometer. The value of saturation magnetization decreased from 49.60 to 35.40 emu/g. The dielectric constant decreased non-linearly whereas the electrical dc resistivity increased with the yttrium concentration in strontium hexaferrite.

scholarly journals Green synthesis and characterization of hexaferrite strontium-perovskite strontium photocatalyst nanocomposites

2020 ◽  
Vol 43 (1) ◽  
pp. 26-42 ◽  
Author(s):  
Zahra Hajian Karahroudi ◽  
Kambiz Hedayati ◽  
Mojtaba Goodarzi
Keyword(s):  
Magnetic Properties ◽  
Green Synthesis ◽  
Sol Gel ◽  
Synthesis Method ◽  
Combustion Method ◽  
Lemon Juice ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion

AbstractThis study presents a preparation of SrFe12O19– SrTiO3 nanocomposite synthesis via the green auto-combustion method. At first, SrFe12O19 nanoparticles were synthesized as a core and then, SrTiO3 nanoparticles were prepared as a shell for it to manufacture SrFe12O19–SrTiO3 nanocomposite. A novel sol-gel auto-combustion green synthesis method has been used with lemon juice as a capping agent. The prepared SrFe12O19–SrTiO3 nanocomposites were characterized by using several techniques to characterize their structural, morphological and magnetic properties. The crystal structures of the nanocomposite were investigated via X-ray diffraction (XRD). The morphology of SrFe12O19– SrTiO3 nanocomposite was studied by using a scanning electron microscope (SEM). The elemental composition of the materials was analyzed by an energy-dispersive X-ray (EDX). Magnetic properties and hysteresis loop of nanopowder were characterized via vibrating sample magnetometer (VSM) in the room temperature. Fourier transform infrared spectroscopy (FTIR) spectra of the samples showed the molecular bands of nanoparticles. Also, the photocatalytic behavior of nanocomposites has been checked by the degradation of azo dyes under irradiation of ultraviolet light.

Study on optical and magnetic properties of FexNi1-xMn2O4 materials

2021 ◽  
Vol 66 (1) ◽  
pp. 57-64
Author(s):  
Hang Pham Vu Bich ◽  
Yen Nguyen Hai ◽  
Mai Phung Thi Thanh ◽  
Dung Dang Duc ◽  
Hung Nguyen Manh ◽  
...  
Keyword(s):  
Single Phase ◽  
Sol Gel ◽  
Vibrating Sample Magnetometer ◽  
Raman Scattering Spectrum ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scattering Spectrum ◽  
Diffraction Diagram ◽  
Optical And Magnetic Properties ◽  
Scanning Electron

In this study, we present the process of synthesis FexNi1-xMn2O4 (x = 0; 0.1; 0.3; 0.5; 0.7; 0.9; 1) by method sol-gel. Scanning electron microscope results shows that the particle size is about 50 nm. The X-ray diffraction diagram shows that the samples are single phase, changing structure clearly as the x ratio increases from 0 to 1. The lattice constant, the bond length also changes with x-value as shown on the Raman scattering spectrum. The results of the vibrating sample magnetometer show that the magnetism of the material FexNi1-xMn2O4 changes with the value of x and reaches a maximum in the range x from 0.5 to 0.7.

Nanocrystalline Barium Zirconium Titanate Synthesized by the Sonochemical Process

2013 ◽  
Vol 802 ◽  
pp. 119-123
Author(s):  
Supamas Wirunchit ◽  
Rangson Muanghlua ◽  
Supamas Wirunchit ◽  
Wanwilai Vittayakorn ◽  
Naratip Vittayakorn
Keyword(s):  
Crystal Structure ◽  
Electron Microscopy ◽  
Reaction Time ◽  
Single Phase ◽  
Zirconium Titanate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Large Particles ◽  
Barium Zirconium Titanate ◽  
Scanning Electron

Nanocrystalline barium zirconium titanate, BaZr0.4Ti0.6O3, was synthesized successfully via the sonochemical process. The effects of reaction time on the precipitation of Ba(Zr,Ti)O3 particles were investigated briefly. The crystal structure as well as molecular vibrations and morphology were investigated. X-ray diffraction indicated that the powders exhibited a single phase perovskite structure, without the presence of pyrochlore or unwanted phases at the reaction time of 60 min. Nanocrystals were formed before being oriented and aggregated into large particles in aqueous solution under ultrasonic irradiation. A scanning electron microscopy (SEM) photograph showed the BZT powder as spherical in shape with uniform nanosized features.

Crystal Structure of BiFeO3 Synthesized Using the Hydrothermal Processing

2014 ◽  
Vol 602-603 ◽  
pp. 947-950
Author(s):  
Zhen Wang ◽  
Hai Yan Chen ◽  
Lin Qiang Gao ◽  
Xin Zou
Keyword(s):  
Crystal Structure ◽  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Single Phase ◽  
Hydrothermal Processing ◽  
Optimal Conditions ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

BiFeO3 nanoparticles were successfully synthesized by a hydrothermal method by a mineralizer (KNO3). Structural characterization was performed by thermal analysis, powder X-ray diffraction (XRD) and scanning electron microscopy (TEM).The results showed that the products were perovskite structure BiFeO3 powders. Optimal conditions for the synthesis of single-phase BiFeO3 ceramics were obtained.

FABRICATION AND CHARACTERISTICS OF ALN NANOWIRES

2001 ◽  
Vol 15 (30) ◽  
pp. 1455-1458 ◽  
Author(s):  
H. CHEN ◽  
X. K. LU ◽  
S. Q. ZHOU ◽  
X. H. HAO ◽  
Z. X. WANG
Keyword(s):  
Crystal Structure ◽  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Single Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Sublimation Method ◽  
Scanning Electron

Single phase AlN nanowires are fabricated by a sublimation method. They were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), typical selected area electron diffraction (SAED) and high-resolution transmission electron microscopy (HRTEM). The SEM and TEM images show that most of the nanowires have diameters of about 10–60 nm. The crystal structure of AlN nanowires revealed by XRD, SAED and HRTEM shows the AlN nanowires have a wurtzite structure.

scholarly journals Structural, Optical, and Catalytic Properties of MgCr2O4 Spinel-Type Nanostructures Synthesized by Sol–Gel Auto-Combustion Method

Catalysts ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1476
Author(s):  
Vasyl Mykhailovych ◽  
Andrii Kanak ◽  
Ştefana Cojocaru ◽  
Elena-Daniela Chitoiu-Arsene ◽  
Mircea Nicolae Palamaru ◽  
...  
Keyword(s):  
Tartaric Acid ◽  
Catalytic Properties ◽  
Spinel Phase ◽  
Sol Gel ◽  
Combustion Method ◽  
Temperature Treatment ◽  
X Ray Diffraction ◽  
Spinel Type ◽  
X Ray ◽  
Auto Combustion

Spinel chromite nanoparticles are prospective candidates for a variety of applications from catalysis to depollution. In this work, we used a sol–gel auto-combustion method to synthesize spinel-type MgCr2O4 nanoparticles by using fructose (FS), tartaric acid (TA), and hexamethylenetetramine (HMTA) as chelating/fuel agents. The optimal temperature treatment for the formation of impurity-free MgCr2O4 nanostructures was found to range from 500 to 750 °C. Fourier transform infrared (FTIR) spectroscopy was used to determine the lattice vibrations of the corresponding chemical bonds from octahedral and tetrahedral positions, and the optical band gap was calculated from UV–VIS spectrophotometry. The stabilization of the spinel phase was proved by X-ray diffraction (XRD) and energy-dispersive X-ray (EDX) analysis. From field-emission scanning electron microscopy (FE-SEM), we found that the size of the constituent particles ranged from 10 to 40 nm. The catalytic activity of the as-prepared MgCr2O4 nanocrystals synthesized by using tartaric acid as a chelating/fuel agent was tested on the decomposition of hydrogen peroxide. In particular, we found that the nature of the chelating/fuel agent as well as the energy released during the auto-combustion played an important role on the structural, optical, and catalytic properties of MgCr2O4 nanoparticles obtained by this synthetic route.

scholarly journals Effects of Varying Alx Moles on the Structure and Luminescence Properties of ZnAlxO1.5x + 1:0.1% Tb3+ Nano Phosphor Prepared using Citrate sol-gel Method

2021 ◽  
Author(s):  
V Maphiri ◽  
L Melato ◽  
Mhlongo ◽  
TT Hlatshwayo ◽  
TE Motaung ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Electron Microscopy ◽  
Single Phase ◽  
Sol Gel ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Transmission Electron ◽  
Nano Phosphor ◽  
Scanning Electron

Abstract Un-doped and ZnAlxO(1.5x + 1):0.1% Tb3+ (ZAOT) nano-powders were synthesized via citrate sol-gel method. The Alx moles were varied in the range of 0.25 ≤ x ≤ 5.0. The X-ray powder diffraction (XRD) data revealed that for the x < 1.5, the prepared samples crystal structure consists of mixed phases of the cubic ZnAl2O4 and hexagonal ZnO phases, while for the x ≥ 1.5 the structure consists of single phase of cubic ZnAl2O4. This was confirmed by the Raman and Fourier-Transform Infrared (FTIR) vibrational spectroscopy. Scanning electron microscopy (SEM) showed that varying Alx moles influences the morphology while Transmission electron microscopy (TEM) shows the dual morphology at x < 1.5. The photoluminescence (PL) revealed intense and distinct emissions attributed to both the host and Tb3+ transitions. The emission intensity highly depends on the Alx moles. The International Commission on Illumination (CIE) colour chromaticity showed that the emission colour could be tuned by varying the Alx moles.

Study of the magnetic and structural properties of Al–Cr codoped Y-type hexaferrite prepared via sol–gel auto-combustion method

2015 ◽  
Vol 29 (14) ◽  
pp. 1550090 ◽  
Author(s):  
O. Mirzaee ◽  
R. Mohamady ◽  
A. Ghasemi ◽  
Y. Alizad Farzin
Keyword(s):  
Magnetic Properties ◽  
Sol Gel ◽  
Combustion Method ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hexagonal Shape ◽  
Auto Combustion ◽  
Xrd Patterns ◽  
Cr Doping

Nanostructure of Y-type hexaferrite with composition of Sr 2 Ni 2 Al x/2 Cr x/2 Fe 12-x O 22 (where x are 0, 0.6, 1.2, 1.8, 2.4 and 3) were prepared by sol–gel auto-combustion method. The influence of Al and Cr doping on the structural and magnetic properties has been investigated. The X-ray diffraction (XRD) patterns confirm phase formation of Y-type hexaferrite. The microstructure and morphology of prepared samples were studied by high resolution field emission scanning electron microscope (FESEM) which shows the hexagonal shape for all of the samples. Magnetic properties were characterized using vibrating sample magnetometer (VSM). The magnetic results revealed that by increasing the Al and Cr to the structure, the coercivity was also increased from 840 Oe to 1160 Oe. Moreover it has been shown that with addition of dopants, saturation magnetization (Ms) and remnant magnetization (Mr) were decreased from 39.61 emu/g to 30.11 emu/g and from 17.51 emu/g to 14.62 emu/g, respectively, due to the entrance of nonmagnetic ions into Fe 3+ sites.

Sign in / Sign up

Export Citation Format

Share Document