scholarly journals Green synthesis and characterization of hexaferrite strontium-perovskite strontium photocatalyst nanocomposites

2020 ◽  
Vol 43 (1) ◽  
pp. 26-42 ◽  
Author(s):  
Zahra Hajian Karahroudi ◽  
Kambiz Hedayati ◽  
Mojtaba Goodarzi
Keyword(s):  
Magnetic Properties ◽  
Green Synthesis ◽  
Sol Gel ◽  
Synthesis Method ◽  
Combustion Method ◽  
Lemon Juice ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion

AbstractThis study presents a preparation of SrFe12O19– SrTiO3 nanocomposite synthesis via the green auto-combustion method. At first, SrFe12O19 nanoparticles were synthesized as a core and then, SrTiO3 nanoparticles were prepared as a shell for it to manufacture SrFe12O19–SrTiO3 nanocomposite. A novel sol-gel auto-combustion green synthesis method has been used with lemon juice as a capping agent. The prepared SrFe12O19–SrTiO3 nanocomposites were characterized by using several techniques to characterize their structural, morphological and magnetic properties. The crystal structures of the nanocomposite were investigated via X-ray diffraction (XRD). The morphology of SrFe12O19– SrTiO3 nanocomposite was studied by using a scanning electron microscope (SEM). The elemental composition of the materials was analyzed by an energy-dispersive X-ray (EDX). Magnetic properties and hysteresis loop of nanopowder were characterized via vibrating sample magnetometer (VSM) in the room temperature. Fourier transform infrared spectroscopy (FTIR) spectra of the samples showed the molecular bands of nanoparticles. Also, the photocatalytic behavior of nanocomposites has been checked by the degradation of azo dyes under irradiation of ultraviolet light.

Study of the magnetic and structural properties of Al–Cr codoped Y-type hexaferrite prepared via sol–gel auto-combustion method

2015 ◽  
Vol 29 (14) ◽  
pp. 1550090 ◽  
Author(s):  
O. Mirzaee ◽  
R. Mohamady ◽  
A. Ghasemi ◽  
Y. Alizad Farzin
Keyword(s):  
Magnetic Properties ◽  
Sol Gel ◽  
Combustion Method ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hexagonal Shape ◽  
Auto Combustion ◽  
Xrd Patterns ◽  
Cr Doping

Nanostructure of Y-type hexaferrite with composition of Sr 2 Ni 2 Al x/2 Cr x/2 Fe 12-x O 22 (where x are 0, 0.6, 1.2, 1.8, 2.4 and 3) were prepared by sol–gel auto-combustion method. The influence of Al and Cr doping on the structural and magnetic properties has been investigated. The X-ray diffraction (XRD) patterns confirm phase formation of Y-type hexaferrite. The microstructure and morphology of prepared samples were studied by high resolution field emission scanning electron microscope (FESEM) which shows the hexagonal shape for all of the samples. Magnetic properties were characterized using vibrating sample magnetometer (VSM). The magnetic results revealed that by increasing the Al and Cr to the structure, the coercivity was also increased from 840 Oe to 1160 Oe. Moreover it has been shown that with addition of dopants, saturation magnetization (Ms) and remnant magnetization (Mr) were decreased from 39.61 emu/g to 30.11 emu/g and from 17.51 emu/g to 14.62 emu/g, respectively, due to the entrance of nonmagnetic ions into Fe 3+ sites.

Magnetic Properties and Unusual Morphologies of Barium Ferrites Prepared by Electrospinning and Sol-Gel Auto-Combustion Method

2015 ◽  
Vol 815 ◽  
pp. 141-146 ◽  
Author(s):  
Gui Fang Liu ◽  
Run Hua Fan ◽  
Ke Lan Yan ◽  
Xu Ai Wang ◽  
Kai Sun ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Barium Ferrite ◽  
Raw Materials ◽  
Sol Gel ◽  
Combustion Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion ◽  
Electrospinning Method ◽  
Barium Ferrites

Barium ferrite fibers and barium ferrite powders were successfully prepared respectively via Electrospinning method and sol-gel auto-combustion method by using Fe (NO3)3·9H2O, Ba (NO3)2 as one of the main raw materials. X-ray diffraction (XRD) and field emission scanning electron microscope (FSEM) were used to study the phase composition and microstructure of barium ferrite. The results showed that barium ferrite fibers consist of a mixture of barium ferrite particles, the diameter of fibers is about 200 nm; barium ferrite powders prepared by sol-gel auto-combustion method were flake barium ferrite compositing of rod-like grains of less than 100 nm in size stacking disorderly. Magnetic properties were investigated by vibrating sample magnetometer (VSM), the results showed that the values of Mr, Ms, and Hc of barium ferrite fibers and powders are quite different due to their different morphologies.

scholarly journals Effect of Heat Treatment on Structural and Magnetic Properties of Li-Ni Ferrite Prepared via Sol-Gel Auto-Combustion Method

2021 ◽  
Author(s):  
Jiali Song ◽  
Zhi Wang ◽  
Yu Gao
Keyword(s):  
Grain Size ◽  
Magnetic Properties ◽  
Annealing Temperature ◽  
Sol Gel ◽  
Combustion Method ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion ◽  
Ft Ir

Abstract Nanocrystalline Li 0.35 Ni 0.3 Fe 2.35 O 4 ferrites were prepared at different annealing temperature by sol-gel auto-combustion method. The effects of the annealing temperature on the structure and magnetic properties of the synthesized Li-Ni ferrites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectra (FT-IR) and Squid-VSM. Rietveld refinement of the X-ray diffraction data confirmed the occurrence of phase transition from α-spinel to β-spinel, from which the ideal cation occupation and lattice parameter can be obtained. The grain size increased significantly with annealing temperature. The variation of saturation magnetization can be well explained in terms of the occupation of ions in tetrahedron and octahedron. The coercivity initially increased and later decreased significantly from 115 to 37 Oe with the increase of annealed temperature which could be attributed the fact that the 600℃-annealed grain size is close to transition size from single to multidomain region.

scholarly journals Y3+ substituted Sr-hexaferrites: sol-gel synthesis, structural, magnetic and electrical characterization

Cerâmica ◽  
2019 ◽  
Vol 65 (374) ◽  
pp. 274-281 ◽  
Author(s):  
S. S. Satpute ◽  
S. R. Wadgane ◽  
S. R. Kadam ◽  
D. R. Mane ◽  
R. H. Kadam
Keyword(s):  
Electron Microscopy ◽  
Sol Gel ◽  
Electrical Characterization ◽  
Combustion Method ◽  
Hexagonal Structure ◽  
Strontium Hexaferrite ◽  
X Ray Diffraction ◽  
X Ray ◽  
Morphological Studies ◽  
Auto Combustion

Abstract Y3+ substituted strontium hexaferrites having chemical composition SrYxFe12-xO19 (x= 0.0, 0.5, 1.0, 1.5) were successfully synthesized by sol-gel auto-combustion method. The structural and morphological studies of prepared samples were investigated by using X-ray diffraction technique, energy dispersive X-ray spectroscopy, field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy. The X-ray diffraction pattern confirmed the single-phase hexagonal structure of yttrium substituted strontium ferrite and the lattice parameters a and c increased with the substitution of Y3+ ions. The crystallite size also varied with x content from 60 to 80 nm. The morphology was studied by FE-SEM, and the grain size of nanoparticles ranged from 44 to 130 nm. The magnetic properties were investigated by using vibrating sample magnetometer. The value of saturation magnetization decreased from 49.60 to 35.40 emu/g. The dielectric constant decreased non-linearly whereas the electrical dc resistivity increased with the yttrium concentration in strontium hexaferrite.

IMPROVED MAGNETIC PROPERTIES OF Sm COMBINING Co OR/AND Zn SUBSTITUTED BARIUM M-TYPE HEXAFERRITES

2012 ◽  
Vol 26 (26) ◽  
pp. 1250141 ◽  
Author(s):  
Y. B. HAN ◽  
J. SHA ◽  
L. N. SUN ◽  
Q. TANG ◽  
Q. LU ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Phase Composition ◽  
Magnetocrystalline Anisotropy ◽  
Sol Gel ◽  
Combustion Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Barium Hexaferrites ◽  
Auto Combustion ◽  
Magnetic Dilution

Sm (Co or/and Zn) substituted nanocrystalline barium hexaferrites were synthesized by the sol–gel auto-combustion process, then X-ray diffraction (XRD) and vibrating sample magnetometer (VSM) were used to characterize and discuss the phase composition and the magnetic properties of the as-prepared barium hexaferrites. All results showed that the phase composition and magnetic properties were closely related to the doping elements and x. Owing to hyperfine field, canting spin, magnetic dilution and impurity phases, the saturation magnetization (Ms) of all samples increased firstly, and then decreased. Considering the crystallization, the magnetocrystalline anisotropy and the ions occupancy, the doping elements and x critically affected the coercivity (Hc). Compared the magnetic properties of all the samples, it is concluded that Zn 2+ and Co 2+ influenced each other and Zn 2+ occupied 4f2 sites prior to Co 2+, which led to the increase of Ms and the decrease of Hc.

scholarly journals Structural, Optical, and Catalytic Properties of MgCr2O4 Spinel-Type Nanostructures Synthesized by Sol–Gel Auto-Combustion Method

Catalysts ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1476
Author(s):  
Vasyl Mykhailovych ◽  
Andrii Kanak ◽  
Ştefana Cojocaru ◽  
Elena-Daniela Chitoiu-Arsene ◽  
Mircea Nicolae Palamaru ◽  
...  
Keyword(s):  
Tartaric Acid ◽  
Catalytic Properties ◽  
Spinel Phase ◽  
Sol Gel ◽  
Combustion Method ◽  
Temperature Treatment ◽  
X Ray Diffraction ◽  
Spinel Type ◽  
X Ray ◽  
Auto Combustion

Spinel chromite nanoparticles are prospective candidates for a variety of applications from catalysis to depollution. In this work, we used a sol–gel auto-combustion method to synthesize spinel-type MgCr2O4 nanoparticles by using fructose (FS), tartaric acid (TA), and hexamethylenetetramine (HMTA) as chelating/fuel agents. The optimal temperature treatment for the formation of impurity-free MgCr2O4 nanostructures was found to range from 500 to 750 °C. Fourier transform infrared (FTIR) spectroscopy was used to determine the lattice vibrations of the corresponding chemical bonds from octahedral and tetrahedral positions, and the optical band gap was calculated from UV–VIS spectrophotometry. The stabilization of the spinel phase was proved by X-ray diffraction (XRD) and energy-dispersive X-ray (EDX) analysis. From field-emission scanning electron microscopy (FE-SEM), we found that the size of the constituent particles ranged from 10 to 40 nm. The catalytic activity of the as-prepared MgCr2O4 nanocrystals synthesized by using tartaric acid as a chelating/fuel agent was tested on the decomposition of hydrogen peroxide. In particular, we found that the nature of the chelating/fuel agent as well as the energy released during the auto-combustion played an important role on the structural, optical, and catalytic properties of MgCr2O4 nanoparticles obtained by this synthetic route.

Structural and Electrical Conductivity Studies in Nickel Ferrite Nano-Particles

2013 ◽  
Vol 209 ◽  
pp. 177-181 ◽  
Author(s):  
Ram S. Barkule ◽  
D.V. Kurmude ◽  
A.V. Raut ◽  
N.N. Waghule ◽  
K.M. Jadhav ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Nickel Ferrite ◽  
Sol Gel ◽  
Chelating Agent ◽  
Average Crystallite Size ◽  
Combustion Method ◽  
Nano Particles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion

Abstract: The magnetic nano-particles of nickel ferrite were synthesized successfully by sol-gel auto-combustion method using high purity metal nitrates and citric acid as chelating agent. The as prepared powder of nickel ferrite was sintered at 5500C for 5 hr to obtain good crystalline phase and was used for further study. The X-ray diffraction technique was employed to confirm the single phase formation of nickel ferrite nano-particles. The X-ray diffraction pattern shows the Bragg’s peak which belongs to cubic spinel structure. The values of lattice constant, X-ray density, oxygen parameter and radii of tetrahedral and octahedral sites were calculated from XRD data. The average crystallite size was estimated using Scherrer’s formula and found to be 6 nm. The temperature dependence of the electrical conductivity plot shows the kink, which can be attributed to ferromagnetic-paramagnetic transition. The activation energy obtained from resistivity plots in paramagnetic region is found to be more than that in ferrimagnetic region. The conduction mechanism in these nickel ferrite nano-particles has been discussed on the basis of hopping of electrons.

ELABORATION AND CHARACTERIZATION OF La4Ni3O10 CATHODE MATERIAL (SOFC) BY SOL-GEL PROCESS

2011 ◽  
Vol 1326 ◽  
Author(s):  
Rene Fabian Cienfuegos ◽  
Leonardo Chávez Guerrero ◽  
Sugeheidy Carranza ◽  
Laurie Jouanin ◽  
Guillaume Marie ◽  
...  
Keyword(s):  
Cathode Material ◽  
Sol Gel ◽  
Synthesis Method ◽  
Solid Material ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Metallic Salts ◽  
Sol Gel Process

ABSTRACTThe goal in this study was to synthesize a lanthanum - nickel phase (Ruddlesden-Popper phases) La4Ni3O10. This material was prepared using a polymeric route. An easy synthesis method is presented in order to obtain an economical cathode material, which can be used in Solid Oxide Fuel Cells (SOFC). The polymeric precursors were prepared following the Castillo method. The originality of this work was to optimize the ratio HMTA/ metallic salts from 1 to 6. The obtained powders were characterized by thermal analysis; Differential Scanning Calorimetry (DSC Q10 Instrument TA), Thermogravimetric Analysis (TGA - Q50 Instrument TA-) and X-ray diffractometer (Bruker, D8 Advance diffractometer), in order to determine the crystallized phase. Experiments 5 and 6 did not present coagulation but after few days, solution 5 was transformed into a gel. Gels 2 to 5 were heated in order to obtain a solid material. These powders are characterized by thermogravimetric and thermo-differential methods. The powders obtained at 800, 900 and 1000°C were analyzed by X-ray diffraction and it was found that the temperature to get to the La4Ni3O10 phase was 1000ºC.

scholarly journals Influence of the B-site cation nature on crystal structure and magnetic properties of Ca2BMoO6 (B = Cr, La, Sm) double perovskite

2014 ◽  
Vol 22 (2) ◽  
pp. 145-154 ◽  
Author(s):  
Ioana A. Gorodea
Keyword(s):  
Magnetic Properties ◽  
Sol Gel ◽  
Double Perovskite ◽  
Combustion Method ◽  
X Ray Diffraction ◽  
Ionic Radii ◽  
Auto Combustion ◽  
The Fourier Transform ◽  
First Time

Abstract Double perovskite-type oxide Ca2BMoO6 materials, where B = Cr, La and Sm, were prepared by the sol-gel auto-combustion method for the first time. The role of different B-site cations on their synthesis, structures, and magnetic properties was investigated. The synthesis progress was followed by the Fourier transform infrared spectroscopy and the samples’ structure was investigated by X-ray diffraction. The increase of the ionic radii B leads to the decrease of the t-value which reflects the structural distortion from the ideal cubic perovskite. Magnetization measurements were made with a SQUID magnetometer. All compounds are ferimagnetic and magnetic properties are indirectly influenced by the distortion degree of the lattice and disorder on the B/B’ positions

Sign in / Sign up

Export Citation Format

Share Document