Fault Diagnosis Method for the Rolling Bearing Based on Information Fusion and BP Neural Network

2012 ◽  
Vol 538-541 ◽  
pp. 1956-1961 ◽  
Author(s):  
Jin Min Zhang ◽  
Yin Hua Huang ◽  
Si Ming Wang
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Information Fusion ◽  
Bp Neural Network ◽  
Back Propagation ◽  
Vibration Signal ◽  
Rolling Bearing ◽  
Back Propagation Neural Network ◽  
Weighted Fusion ◽  
Diagnosis Method

Abstract. In order to diagnose the fault of rolling bearing by the vibration signal, a new method of fault diagnosis based on weighted fusion and BP (Back Propagation) neural network was put forward. At first, the vibration signal from the sensors was wave filtered through the method of correlation function, then the fused signal was obtained by the classical adaptive weighted fusion method, the multi-type characteristics parameters was to be as a neural network input. Finally, the fault diagnosis of rolling bearing was realized by the BP neural network, and the results show that the multi-sensor information fusion fault diagnosis method can be proved effectively to achieve the fault diagnosis of rolling bearing.

Research on Roller Bearing with Fault Diagnosis Method Based on EMD and BP Neural Network

2014 ◽  
Vol 1014 ◽  
pp. 501-504 ◽  
Author(s):  
Shu Guo ◽  
You Cai Xu ◽  
Xin Shi Li ◽  
Ran Tao ◽  
Kun Li ◽  
...  
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Bp Neural Network ◽  
Roller Bearing ◽  
Vibration Signal ◽  
Classification Performance ◽  
Outer Race ◽  
Mode Decomposition ◽  
Diagnosis Method ◽  
Main Fault

In order to discover the fault with roller bearing in time, a new fault diagnosis method based on Empirical mode decomposition (EMD) and BP neural network is put forward in the paper. First, we get the fault signal through experiments. Then we use EMD to decompose the vibration signal into a series of single signals. We can extract main fault information from the single signals. The kurtosis coefficient of the single signals forms a feature vector which is used as the input data of the BP neural network. The trained BP neural network can be used for fault identification. Through analyzing, BP neural network can distinguish the fault into normal state, inner race fault, outer race fault. The results show that this method can gain very stable classification performance and good computational efficiency.

Full Information Fusion and its Application in Fault Diagnosis for Rotary Machinery

2011 ◽  
Vol 66-68 ◽  
pp. 1315-1319 ◽  
Author(s):  
Xin Min Dong ◽  
Jie Han ◽  
Wang Shen Hao
Keyword(s):  
Fault Diagnosis ◽  
Information Fusion ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
Engineering Practice ◽  
Full Information ◽  
Single Section ◽  
Rotary Machinery ◽  
Diagnosis Method ◽  
Diagnosis Accuracy

The rotor motion and the information fusion of single section were discussed; the fault diagnosis method for rotary machinery based on the full information fusion of two sections was put forward, and the back propagation neural network model was established. Engineering practice indicated that the fault diagnosis accuracy based on the information fusion of two sections was higher than that based on the information fusion of single section.

scholarly journals Intelligent Model-based Integrity Assessment of Nonstationary Mechanical System

2021 ◽  
Author(s):  
Hanxin Chen ◽  
Yuzhuo Miao ◽  
Yongting Chen ◽  
Lu Fang ◽  
Li Zeng ◽  
...  
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Particle Filter ◽  
Mechanical System ◽  
Centrifugal Pump ◽  
Bp Neural Network ◽  
Vibration Signal ◽  
Fault Identification ◽  
Integrity Assessment ◽  
Diagnosis Method

The fault diagnosis model for nonstationary mechanical system is proposed in the condition monitoring. The algorithm with an improved particle filter and Back Propagation for intelligent fault identification is developed, which is used to reduce the noise of the experimental vibration signals to delete the negative effect of the noise on the feature extraction of the original vibration signal. The proposed integrated method is applied for the trouble shoot of the impellers inside the centrifugal pump. The principal component analysis (PCA) method optimizes the clean vibration signal to choose the optimal eigenvalue features.The constructed BP neural network is trained to get the condition models for fault identification. The proposed novel model is compared with the BP neural network based on traditional PF and particle swarm optimization particle filter (PSO-PF) algorithm. The BP neural network diagnosis method based on the improved PF algorithm is much better for the integrity assessment of the centrifugal pump impeller. This method is much significant for big data mining in the fault diagnosis method of the complex mechanical system.

Information Fusion of the Vibration and Acoustic Signals Based Rolling Bearing Incipient Fault Diagnosis Method

2013 ◽  
Vol 774-776 ◽  
pp. 1499-1502
Author(s):  
Ting Feng Ming ◽  
Yong Xiang Zhang ◽  
Jing Li
Keyword(s):  
Fault Diagnosis ◽  
Correlation Analysis ◽  
Information Fusion ◽  
Vibration Signal ◽  
Acoustic Resonance ◽  
Rolling Bearing ◽  
Rolling Bearings ◽  
Diagnosis Method ◽  
Incipient Fault ◽  
Fusion Analysis

The feature of correlation analysis were described and applied to analyzing the vibration signal of the gearbox. Aiming to that the diagnosis effect of the rolling bearings incipient fault was not good through the vibration spectrum and the resonance demodulation spectrum directly, the information fusion technology based on the correlation analysis is proposed to processing the vibration and acoustic resonance demodulation signal. The experimental results show that the presented correlation fusion analysis technology can be as the basis of the effective fault diagnosis method for the rolling bearings incipient defect.

scholarly journals Chaotic Extension Neural Network-Based Fault Diagnosis Method for Solar Photovoltaic Systems

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Kuo-Nan Yu ◽  
Her-Terng Yau ◽  
Jian-Yu Li
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
Photovoltaic System ◽  
Photovoltaic Systems ◽  
Solar Photovoltaic ◽  
Error Back Propagation ◽  
Point Tracking ◽  
Diagnosis Method

At present, the solar photovoltaic system is extensively used. However, once a fault occurs, it is inspected manually, which is not economical. In order to remedy the defect of unavailable fault diagnosis at any irradiance and temperature in the literature with chaos synchronization based intelligent fault diagnosis for photovoltaic systems proposed by Hsieh et al., this study proposed a chaotic extension fault diagnosis method combined with error back propagation neural network to overcome this problem. It used the nn toolbox of matlab 2010 for simulation and comparison, measured current irradiance and temperature, and used the maximum power point tracking (MPPT) for chaotic extraction of eigenvalue. The range of extension field was determined by neural network. Finally, the voltage eigenvalue obtained from current temperature and irradiance was used for the fault diagnosis. Comparing the diagnostic rates with the results by Hsieh et al., this scheme can obtain better diagnostic rates when the irradiances or the temperatures are changed.

scholarly journals Fault Diagnosis of Subway Traction Motor Bearing Based on Information Fusion under Variable Working Conditions

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Yanwei Xu ◽  
Weiwei Cai ◽  
Tancheng Xie
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Working Conditions ◽  
Information Fusion ◽  
Working Condition ◽  
Rolling Bearing ◽  
Traction Motor ◽  
Bearing Fault ◽  
Diagnosis Method ◽  
Motor Bearing

Under the variable working condition, the fault signal of the rolling bearing contains rich characteristic information. In view of the problem that the traditional fault diagnosis method of the rolling bearing depends on the prior knowledge and expert experience too much and the low recognition rate of some faults with the single signal, one method of rolling bearing fault diagnosis based on information fusion under the variable working condition is proposed. Firstly, one test and multi-information acquisition system of the rolling bearing is built. Secondly, the metro traction motor bearing nu216 is selected as the research object, and to prefabricate the defects, the data of acoustic emission and vibration acceleration signals during the test of the bearing is acquired. Then, the original signal is processed and extracted by the wavelet packet decomposition, and the normalized feature information is fused by the convolution neural network. Finally, the two-dimensional convolution neural network model is established to diagnose the bearing fault of the metro traction motor under different conditions. The test results show that the intelligent fault diagnosis method of the subway traction motor bearing based on information fusion under variable working conditions can accurately identify the fault type of the bearing, while the load and speed change. When the neural network training set and the test set cover the same working conditions, the accuracy can reach 100%.

Fault Diagnosis of Water Pump Based on Probabilistic Neural Network

2011 ◽  
Vol 338 ◽  
pp. 421-424
Author(s):  
Tie Jun Li ◽  
Yan Chun Zhao ◽  
Xin Li ◽  
Cheng Shi Zhu ◽  
Jian Rong Ning
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Basic Principle ◽  
Probabilistic Neural Network ◽  
Back Propagation ◽  
Vibration Signal ◽  
Back Propagation Neural Network ◽  
Signal Spectrum ◽  
Water Pump ◽  
Time Diagnosis

The basic principle of probabilistic neural network (PNN) is introduced, which is used in the fault diagnosis of water pump in this paper. The multiple and fractional frequencies in the fault vibration signal spectrum are taken as the feature vectors, and the samples of the fault are established. The probabilistic neural network is trained based on the symptom diagnosis. The result shows that probabilistic neural network can overcome the local optimization of back propagation neural network (BPNN) and meet the requirements for fast diagnosis and high precision diagnosis during fault diagnosis process, so probabilistic neural network can be used in the real time diagnosis, and the fault diagnosis based on probabilistic neural network is feasible.

Sign in / Sign up

Export Citation Format

Share Document