Study on the Isothermal Crystallization Kinetics of Polyvinyl Pyrrolidone/Polyamide 6 Blends

2012 ◽  
Vol 557-559 ◽  
pp. 1487-1491
Author(s):  
Shi Jie Zhang ◽  
Yi Wen Tang ◽  
Xin Li Yang ◽  
Li Hua Cheng
Keyword(s):  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Crystallization Process ◽  
Crystallization Rate ◽  
Polyamide 6 ◽  
Polyvinyl Pyrrolidone ◽  
Avrami Equation ◽  
Intermolecular Hydrogen Bonds ◽  
Isothermal Crystallization Kinetics ◽  
Kinetics Of

The Avrami equation was used in the study of the isothermal crystallization kinetics of Polyvinyl pyrrolidone/Polyamide 6 Blends. The addition of PVP can hinder the PA6 crystallization process, increase the crystallization half-time and make the crystallization rate decrease. The molecular entanglements and intermolecular hydrogen bonds between PA6 and PVP chains exert some influence also.

Non-Isothermal Crystallization Kinetics of Graphene Oxide-Carbon Nanotubes Hybrids / Polyamide 6 Composites

2019 ◽  
Vol 41 (3) ◽  
pp. 394-394
Author(s):  
Zhi Qiang Wang Zhi Qiang Wang ◽  
Yong Ke Zhao and Xiang Feng Wu Yong Ke Zhao and Xiang Feng Wu
Keyword(s):  
Carbon Nanotubes ◽  
Graphene Oxide ◽  
Cooling Rate ◽  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Crystallization Rate ◽  
Polyamide 6 ◽  
Degree Of Crystallinity ◽  
Isothermal Crystallization Kinetics ◽  
Kinetics Of

The hybrids combined by nano-materials with different dimensions usually possess much better enhancement effects than single one. Graphene oxide-carbon nanotubes hybrids / polyamide 6 composites has been fabricated. The non-isothermal crystallization kinetics of the as-prepared samples was discussed. Research results showed that increasing the cooling rate was in favor of increasing the crystallization rate and the degree of crystallinity for the as-prepared samples. Moreover, the crystallization rate was first decreased and then increased with increasing the hybrids loading. Furthermore, the crystallization mechanism was changed with increasing the crystallization temperature and the cooling rate. The nucleation and growth modes of the non-isothermal crystallization could be classified into three different types, according to the Ozawa’s theory. These complicated results could be attributed to the important role of crystallization rate as well as the simultaneous hindering and promoting effects of the as-prepared hybrids. This work has reference values for understanding the crystallization kinetics of the polyamide 6-based composites.

Parameters characterizing the kinetics of the non-isothermal crystallization of polyamide 5,6 determined by differential scanning calorimetry

2014 ◽  
Vol 34 (4) ◽  
pp. 353-358 ◽  
Author(s):  
Yassir A. Eltahir ◽  
Haroon A.M. Saeed ◽  
Chen Yuejun ◽  
Yumin Xia ◽  
Wang Yimin
Keyword(s):  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Crystallization Rate ◽  
Degree Of Crystallinity ◽  
Avrami Equation ◽  
Scanning Calorimetry ◽  
Isothermal Crystallization Kinetics ◽  
Ozawa Model ◽  
Kinetic Crystallization ◽  
Kinetics Of

Abstract The non-isothermal crystallization behavior of polyamide 5,6 (PA56) was investigated by differential scanning calorimeter (DSC), and the non-isothermal crystallization kinetics were analyzed using the modified Avrami equation, the Ozawa model, and the method combining the Avrami and Ozawa equations. It was found that the Avrami method modified by Jeziorny could only describe the primary stage of non-isothermal crystallization kinetics of PA56, the Ozawa model failed to describe the non-isothermal crystallization of PA56, while the combined approach could successfully describe the non-isothermal crystallization process much more effectively. Kinetic parameters, such as the Avrami exponent, kinetic crystallization rate constant, relative degree of crystallinity, the crystallization enthalpy, and activation energy, were also determined for PA56.

Effect of Organoclay Platelets on Crystallization of PTT/EVA-g-MA Blends: Non-Isothermal Melt Crystallization Kinetics

2015 ◽  
Vol 1120-1121 ◽  
pp. 624-627
Author(s):  
Kun Yan Wang
Keyword(s):  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Crystallization Process ◽  
Crystallization Rate ◽  
Melt Crystallization ◽  
Melt Mixing ◽  
Isothermal Crystallization Kinetics ◽  
Avrami Analysis ◽  
Kinetics Of

PTT/EVA-g-MA (80/20 w/w) nanocomposites were prepared by the melt mixing with different organoclay (OMMT) loading. The effect of OMMT on the non-isothermal crystallization kinetics of composites was investigated by DSC. The Avrami and Ozawa methods were used to describe the non-isothermal crystallization process of pure PTT and composites with various loading of OMMT. The Avrami analysis results show that the crystallization rate of 80/20 (w/w) PTT/EVA-g-MA blends with the OMMT is faster than that of pure PTT. The Ozawa analysis can describe the non-isothermal crystallization of pure PTT very well, but it was rather inapplicable for the 80/20 (w/w) PTT/EVA-g-MA blends with various amounts of the clay.

scholarly journals Isothermal Crystallization Kinetics of Poly(ethylene oxide)/Poly(ethylene glycol)-g-silica Nanocomposites

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 648
Author(s):  
Xiangning Wen ◽  
Yunlan Su ◽  
Shaofan Li ◽  
Weilong Ju ◽  
Dujin Wang
Keyword(s):  
Molecular Weight ◽  
Ethylene Oxide ◽  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Crystallization Rate ◽  
Poly Ethylene Glycol ◽  
Isothermal Crystallization Kinetics ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene ◽  
Kinetics Of

In this work, the crystallization kinetics of poly(ethylene oxide) (PEO) matrix included with poly(ethylene glycol) (PEG) grafted silica (PEG-g-SiO2) nanoparticles and bare SiO2 were systematically investigated by differential scanning calorimetry (DSC) and polarized light optical microscopy (PLOM) method. PEG-g-SiO2 can significantly increase the crystallinity and crystallization temperature of PEO matrix under the non-isothermal crystallization process. Pronounced effects of PEG-g-SiO2 on the crystalline morphology and crystallization rate of PEO were further characterized by employing spherulitic morphological observation and isothermal crystallization kinetics analysis. In contrast to the bare SiO2, PEG-g-SiO2 can be well dispersed in PEO matrix at low P/N (P: Molecular weight of matrix chains, N: Molecular weight of grafted chains), which is a key factor to enhance the primary nucleation rate. In particular, we found that the addition of PEG-g-SiO2 slows the spherulitic growth fronts compared to the neat PEO. It is speculated that the interfacial structure of the grafted PEG plays a key role in the formation of nuclei sites, thus ultimately determines the crystallization behavior of PEO PNCs and enhances the overall crystallization rate of the PEO nanocomposites.

Non-Isothermal Crystallization Kinetics of Polyamide 6/h-Boron Nitride Composites

2017 ◽  
Vol 56 (3) ◽  
pp. 170-177 ◽  
Author(s):  
Xiang-Feng Wu ◽  
Yong-Ke Zhao ◽  
Hui Li ◽  
Ze-Hua Zhao ◽  
Yang Sun ◽  
...  
Keyword(s):  
Boron Nitride ◽  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Polyamide 6 ◽  
Isothermal Crystallization Kinetics ◽  
Kinetics Of

Effects of Attapulgite on the Isothermal Crystallization Behavior of Poly(Butylene Succinate-co-Butylene Adipate)

2013 ◽  
Vol 791-793 ◽  
pp. 56-59
Author(s):  
Zhi Guo Qi ◽  
Jin Nan Chen ◽  
Bao Hua Guo ◽  
Yu Zhang
Keyword(s):  
Crystallization Kinetics ◽  
Crystallization Temperature ◽  
Isothermal Crystallization ◽  
Crystallization Behavior ◽  
Growth Form ◽  
Crystallization Rate ◽  
Melt Mixing ◽  
Butylene Succinate ◽  
Isothermal Crystallization Kinetics ◽  
Kinetics Of

Poly (butylene succinate-co-butylene adipate)/attapulgite nanocomposites were prepared by melt mixing in a HAAKE mixer. The crystallization kinetics of PBSA and its nanocomposites was studied under isothermal conditions by differential scanning calorimetr. The isothermal crystallization kinetics results indicated that attapulgite can induce heterogeneous nucleation, resulting in an improvement on the crystallization temperature and crystallization rate. Both the PBSA and its nanocomposites were correlated to the spherulitic growth form.

Effect of Hyperbranched Polymer on Crystallization Kinetics of Isotactic Polypropylene

2012 ◽  
Vol 535-537 ◽  
pp. 1142-1145
Author(s):  
Guang Tian Liu ◽  
Jing Lei
Keyword(s):  
Activation Energy ◽  
Crystallization Kinetics ◽  
Isotactic Polypropylene ◽  
Isothermal Crystallization ◽  
Hyperbranched Polymer ◽  
Crystallization Rate ◽  
Crystallization Activation Energy ◽  
Scanning Calorimetry ◽  
Isothermal Crystallization Kinetics ◽  
Kinetics Of

In this paper, the isothermal crystallization kinetics of isotactic polypropylene (iPP) and iPP with 5% hyperbranched polymer (HBP) added had been investigated by differential scanning calorimetry (DSC). The results show that a small addition of HBP affects the crystallization behavior of iPP. During isothermal crystallization, the crystallization rate of the blend is higher than those of iPP remarkably. An increase in the Avrami exponent may be attributed to the fractal structure of hyperbranched polymer. The crystallization activation energy is estimated by the Friedman equation, the results show that the activation energy decreases remarkably by addition of HBP and the crystallization rate of the blend is more sensitive to temperature than that of iPP.

Isothermal Crystallization Kinetics of Polypropylene and Hyperbranched Polyester Blends

2011 ◽  
Vol 396-398 ◽  
pp. 1688-1691
Author(s):  
Qing Chun Fan ◽  
Fei Hong Duan ◽  
Huai Bing Guo ◽  
Tian Wu
Keyword(s):  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Crystallization Rate ◽  
Nucleating Agent ◽  
Interfacial Free Energy ◽  
Crystallization Time ◽  
Hyperbranched Polyester ◽  
Isothermal Crystallization Kinetics ◽  
Half Crystallization Time ◽  
Kinetics Of

The isothermal crystallization kinetics of PP with different contents of AB2 hyperbranched polyester(HBP) added has been investigated. The results show that HBP acts as a nucleating agent for PP, and the hyperbranched polyester can decrease the half crystallization time (t1/2) and increase the crystallization rate of PP greatly. The Avrami exponents of PP and nucleated PP are all close to 2.5. Hoffman theory was adopted to calculate the interfacial free energy per unit area perpendicular to PP chains σe of PP and PP/HBP blends.

Sign in / Sign up

Export Citation Format

Share Document