Non-Isothermal Crystallization Kinetics of Graphene Oxide-Carbon Nanotubes Hybrids / Polyamide 6 Composites

2019 ◽  
Vol 41 (3) ◽  
pp. 394-394
Author(s):  
Zhi Qiang Wang Zhi Qiang Wang ◽  
Yong Ke Zhao and Xiang Feng Wu Yong Ke Zhao and Xiang Feng Wu
Keyword(s):  
Carbon Nanotubes ◽  
Graphene Oxide ◽  
Cooling Rate ◽  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Crystallization Rate ◽  
Polyamide 6 ◽  
Degree Of Crystallinity ◽  
Isothermal Crystallization Kinetics ◽  
Kinetics Of

The hybrids combined by nano-materials with different dimensions usually possess much better enhancement effects than single one. Graphene oxide-carbon nanotubes hybrids / polyamide 6 composites has been fabricated. The non-isothermal crystallization kinetics of the as-prepared samples was discussed. Research results showed that increasing the cooling rate was in favor of increasing the crystallization rate and the degree of crystallinity for the as-prepared samples. Moreover, the crystallization rate was first decreased and then increased with increasing the hybrids loading. Furthermore, the crystallization mechanism was changed with increasing the crystallization temperature and the cooling rate. The nucleation and growth modes of the non-isothermal crystallization could be classified into three different types, according to the Ozawa’s theory. These complicated results could be attributed to the important role of crystallization rate as well as the simultaneous hindering and promoting effects of the as-prepared hybrids. This work has reference values for understanding the crystallization kinetics of the polyamide 6-based composites.

Parameters characterizing the kinetics of the non-isothermal crystallization of polyamide 5,6 determined by differential scanning calorimetry

2014 ◽  
Vol 34 (4) ◽  
pp. 353-358 ◽  
Author(s):  
Yassir A. Eltahir ◽  
Haroon A.M. Saeed ◽  
Chen Yuejun ◽  
Yumin Xia ◽  
Wang Yimin
Keyword(s):  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Crystallization Rate ◽  
Degree Of Crystallinity ◽  
Avrami Equation ◽  
Scanning Calorimetry ◽  
Isothermal Crystallization Kinetics ◽  
Ozawa Model ◽  
Kinetic Crystallization ◽  
Kinetics Of

Abstract The non-isothermal crystallization behavior of polyamide 5,6 (PA56) was investigated by differential scanning calorimeter (DSC), and the non-isothermal crystallization kinetics were analyzed using the modified Avrami equation, the Ozawa model, and the method combining the Avrami and Ozawa equations. It was found that the Avrami method modified by Jeziorny could only describe the primary stage of non-isothermal crystallization kinetics of PA56, the Ozawa model failed to describe the non-isothermal crystallization of PA56, while the combined approach could successfully describe the non-isothermal crystallization process much more effectively. Kinetic parameters, such as the Avrami exponent, kinetic crystallization rate constant, relative degree of crystallinity, the crystallization enthalpy, and activation energy, were also determined for PA56.

Study on the Isothermal Crystallization Kinetics of Polyvinyl Pyrrolidone/Polyamide 6 Blends

2012 ◽  
Vol 557-559 ◽  
pp. 1487-1491
Author(s):  
Shi Jie Zhang ◽  
Yi Wen Tang ◽  
Xin Li Yang ◽  
Li Hua Cheng
Keyword(s):  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Crystallization Process ◽  
Crystallization Rate ◽  
Polyamide 6 ◽  
Polyvinyl Pyrrolidone ◽  
Avrami Equation ◽  
Intermolecular Hydrogen Bonds ◽  
Isothermal Crystallization Kinetics ◽  
Kinetics Of

The Avrami equation was used in the study of the isothermal crystallization kinetics of Polyvinyl pyrrolidone/Polyamide 6 Blends. The addition of PVP can hinder the PA6 crystallization process, increase the crystallization half-time and make the crystallization rate decrease. The molecular entanglements and intermolecular hydrogen bonds between PA6 and PVP chains exert some influence also.

scholarly journals Isothermal Crystallization Kinetics of Poly(ethylene oxide)/Poly(ethylene glycol)-g-silica Nanocomposites

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 648
Author(s):  
Xiangning Wen ◽  
Yunlan Su ◽  
Shaofan Li ◽  
Weilong Ju ◽  
Dujin Wang
Keyword(s):  
Molecular Weight ◽  
Ethylene Oxide ◽  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Crystallization Rate ◽  
Poly Ethylene Glycol ◽  
Isothermal Crystallization Kinetics ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene ◽  
Kinetics Of

In this work, the crystallization kinetics of poly(ethylene oxide) (PEO) matrix included with poly(ethylene glycol) (PEG) grafted silica (PEG-g-SiO2) nanoparticles and bare SiO2 were systematically investigated by differential scanning calorimetry (DSC) and polarized light optical microscopy (PLOM) method. PEG-g-SiO2 can significantly increase the crystallinity and crystallization temperature of PEO matrix under the non-isothermal crystallization process. Pronounced effects of PEG-g-SiO2 on the crystalline morphology and crystallization rate of PEO were further characterized by employing spherulitic morphological observation and isothermal crystallization kinetics analysis. In contrast to the bare SiO2, PEG-g-SiO2 can be well dispersed in PEO matrix at low P/N (P: Molecular weight of matrix chains, N: Molecular weight of grafted chains), which is a key factor to enhance the primary nucleation rate. In particular, we found that the addition of PEG-g-SiO2 slows the spherulitic growth fronts compared to the neat PEO. It is speculated that the interfacial structure of the grafted PEG plays a key role in the formation of nuclei sites, thus ultimately determines the crystallization behavior of PEO PNCs and enhances the overall crystallization rate of the PEO nanocomposites.

scholarly journals Thermal Properties and Non-Isothermal Crystallization Kinetics of Poly (δ-Valerolactone) and Poly (δ-Valerolactone)/Titanium Dioxide Nanocomposites

Crystals ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 452 ◽  
Author(s):  
Waseem Saeed ◽  
Abdel-Basit Al-Odayni ◽  
Abdulaziz Alghamdi ◽  
Ali Alrahlah ◽  
Taieb Aouak
Keyword(s):  
Titanium Dioxide ◽  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Three Dimensional ◽  
Degree Of Crystallinity ◽  
Simultaneous Occurrence ◽  
Scanning Calorimetry ◽  
Isothermal Crystallization Kinetics ◽  
The Stability ◽  
Kinetics Of

New poly (δ-valerolactone)/titanium dioxide (PDVL/TiO2) nanocomposites with different TiO2 nanoparticle loadings were prepared by the solvent-casting method and characterized by Fourier transform infra-red, differential scanning calorimetry, X-ray diffraction and scanning electron microscopy, and thermogravimetry analyses. The results obtained reveal good dispersion of TiO2 nanoparticles in the polymer matrix and non-formation of new crystalline structures indicating the stability of the crystallinity of TiO2 in the composite. A significant increase in the degree of crystallinity was observed with increasing TiO2 content. The non-isothermal crystallization kinetics of the PDVL/TiO2 system indicate that the crystallization process involves the simultaneous occurrence of two- and three-dimensional spherulitic growths. The thermal degradation analysis of this nanocomposite reveals a significant improvement in the thermal stability with increasing TiO2 loading.

scholarly journals Non-Isothermal Crystallization Kinetics of Injection Grade PHBV and PHBV/Carbon Nanotubes Nanocomposites Using Isoconversional Method

2020 ◽  
Vol 4 (2) ◽  
pp. 52
Author(s):  
Thaís Larissa do Amaral Montanheiro ◽  
Beatriz Rossi Canuto de Menezes ◽  
Larissa Stieven Montagna ◽  
Cesar Augusto Gonçalves Beatrice ◽  
Juliano Marini ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Crystallization Kinetics ◽  
Isothermal Crystallization ◽  
Model Fitting ◽  
Polarized Light ◽  
Isoconversional Method ◽  
Degree Of Crystallinity ◽  
Gamma Aminobutyric Acid ◽  
Scanning Calorimetry ◽  
Kinetics Of

Carbon nanotubes (CNT)-reinforced polymeric composites are being studied as promising materials due to their enhanced properties. However, understanding the behavior of polymers during non-isothermal crystallization is important once the degree of crystallinity and crystallization processes are affected when nanoparticles are added to matrices. Usually, crystallization kinetics studies are performed using a model-fitting method, though the isoconversional method allows to obtain the kinetics parameter without assuming a crystallization model. Therefore, in this work, CNTs were oxidized (CNT-Ox) and functionalized with gamma-aminobutyric acid (GABA) (CNT-GB) and incorporated into a poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) matrix. The influence of the addition and functionalization of CNT in the crystallization kinetics of PHBV was evaluated using the isoconversional method with differential scanning calorimetry (DSC), and by polarized light optical microscopy (PLOM) and Shore D hardness. The incorporation and functionalization of CNT into PHBV matrix did not change the Šesták and Berggren crystallization model; however, the lowest activation energy was obtained for the composite produced with CNT-GB, suggesting a better dispersion into the PHBV matrix. PLOM and Shore D hardness confirmed the results obtained in the kinetics study, showing the smallest crystallite size for CNT-containing nanocomposites and the highest hardness value for the composite produced with CNT-GB.

scholarly journals Non-Isothermal Crystallization Kinetics of Poly(ethylene glycol) and Poly(ethylene glycol)-B-Poly(ε-caprolactone) by Flash DSC Analysis

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3713
Author(s):  
Xiaodong Li ◽  
Meishuai Zou ◽  
Lisha Lei ◽  
Longhao Xi
Keyword(s):  
Ethylene Glycol ◽  
Cooling Rate ◽  
Isothermal Crystallization ◽  
Three Dimensional ◽  
Crystallization Rate ◽  
Poly Ethylene Glycol ◽  
Avrami Model ◽  
Isothermal Crystallization Kinetics ◽  
Poly Ethylene ◽  
Kinetics Of

The non-isothermal crystallization behaviors of poly (ethylene glycol) (PEG) and poly (ethylene glycol)-b-poly(ε-caprolactone) (PEG-PCL) were investigated through a commercially available chip-calorimeter Flash DSC2+. The non-isothermal crystallization data under different cooling rates were analyzed by the Ozawa model, modified Avrami model, and Mo model. The results of the non-isothermal crystallization showed that the PCL block crystallized first, followed by the crystallization of the PEG block when the cooling rate was 50–100 K/s. However, only the PEG block can crystallize when the cooling rate is 200–600 K/s. The crystallization of PEG-PCL is completely inhibited when the cooling rate is 1000 K/s. The modified Avrami and Ozawa models were found to describe the non-isothermal crystallization processes well. The growth methods of PEG and PEG-PCL are both three-dimensional spherulitic growth. The Mo model shows that the crystallization rate of PEG is greater than that of PEG-PCL.

Sign in / Sign up

Export Citation Format

Share Document