The Effect of Gasoline/1-Butanol Blends on Spark-Ignition Engine Performance

2012 ◽  
Vol 588-589 ◽  
pp. 283-286 ◽  
Author(s):  
Ye Jian Qian ◽  
Zhi Fang Chen ◽  
Wei Huang ◽  
Tian Wei Zhen
Keyword(s):  
Equivalence Ratio ◽  
Peak Pressure ◽  
Numerical Study ◽  
Nitrogen Monoxide ◽  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Attractive Alternative ◽  
Automotive Engine ◽  
Blended Fuels

Butanol has been considered an attractive alternative fuel for automotive engine. In the present study, a numerical study is conducted in a spark-ignition engine fuelled with blends of gasoline and 1-butanol at different fuel/air equivalence ratios. The effect of fuel/air equivalence ratio on engine performance is analyzed. The results show that the peak pressure and peak temperature increases with the increasing of fuel/air equivalence ratio. With increased 1-butanol proportion, the incylinder pressure and incylinder temperature gradually decreases. In addition, effect of fuel/air equivalence ratio on nitrogen monoxide emission is depended on the proportion of 1-butanol in blended fuels.

Numerical Investigation of Using 1-Butanol in a Port Fuel Injection Spark Ignition Engine

2012 ◽  
Vol 588-589 ◽  
pp. 319-322
Author(s):  
Ye Jian Qian ◽  
Zhi Fang Chen ◽  
Chun Mei Wang
Keyword(s):  
Equivalence Ratio ◽  
Fuel Injection ◽  
Numerical Study ◽  
Engine Performance ◽  
Maximum Level ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Nox Emissions ◽  
Performance And Emission ◽  
Port Fuel Injection

A numerical study is conducted in a port fuel-injection, spark-ignition engine fuelled with 1-butanol at different fuel/air equivalence ratios and inlet air temperatures. The effect of fuel/air equivalence ratio and inlet air temperature on the engine performance and emission characteristics is analyzed. The modeling results show that the incylinder pressure and temperature increases with the increase of fuel/air equivalence ratio. The slightly lean mixtures offer the maximum level of NOX emissions. In addition, preheating the inlet air can increase the incylinder pressure peak value and NOX emissions.

scholarly journals Numerical Study of Engine Performance and Emissions for Port Injection of Ammonia into a Gasoline\Ethanol Dual-Fuel Spark Ignition Engine

2021 ◽  
Vol 11 (4) ◽  
pp. 1441
Author(s):  
Farhad Salek ◽  
Meisam Babaie ◽  
Amin Shakeri ◽  
Seyed Vahid Hosseini ◽  
Timothy Bodisco ◽  
...  
Keyword(s):  
Numerical Study ◽  
Combustion Process ◽  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Combustion Model ◽  
Dual Fuel ◽  
Spark Ignition Engines ◽  
Performance And Emissions ◽  
Hc Emissions

This study aims to investigate the effect of the port injection of ammonia on performance, knock and NOx emission across a range of engine speeds in a gasoline/ethanol dual-fuel engine. An experimentally validated numerical model of a naturally aspirated spark-ignition (SI) engine was developed in AVL BOOST for the purpose of this investigation. The vibe two zone combustion model, which is widely used for the mathematical modeling of spark-ignition engines is employed for the numerical analysis of the combustion process. A significant reduction of ~50% in NOx emissions was observed across the engine speed range. However, the port injection of ammonia imposed some negative impacts on engine equivalent BSFC, CO and HC emissions, increasing these parameters by 3%, 30% and 21%, respectively, at the 10% ammonia injection ratio. Additionally, the minimum octane number of primary fuel required to prevent knock was reduced by up to 3.6% by adding ammonia between 5 and 10%. All in all, the injection of ammonia inside a bio-fueled engine could make it robust and produce less NOx, while having some undesirable effects on BSFC, CO and HC emissions.

scholarly journals Effect of Spark Advance on a Gas Run Automotive Spark Ignition Engine

2010 ◽  
pp. 42-49 ◽  
Author(s):  
Md Ehsan
Keyword(s):  
Natural Gas ◽  
Flame Propagation ◽  
Chemical Engineering ◽  
Engine Performance ◽  
Spark Ignition ◽  
Constant Load ◽  
Combustion Characteristics ◽  
Spark Ignition Engine ◽  
Optimum Performance ◽  
Automotive Engine

Petrol engines can run on natural gas, with little modification. The combustion characteristics of naturalgas is different from that of petrol, which eventually affects the engine performance. The performance of atypical automotive engine was studied running on natural gas, firstly at a constant speed for various loadsand then at a constant load for a range of speeds and results were compared with performance using petrol.Variation of the spark advance, consisting of centrifugal and vacuum advance mechanisms, wasinvestigated. Results showed some reduction in power and slight fall of efficiency and higher exhausttemperature, for natural gas. The air-fuel ratio for optimum performance was higher for gas than for petrol.This variation in spark requirement is mainly due to the slower speed of flame propagation for natural gas.For both the cases, the best power spark advance for natural gas was found to have higher values thanpetrol. This issue needs to be addressed during retrofitting petrol engines for running on natural gas.Journal of Chemical Engineering Vol.ChE 24 2006 42-49

scholarly journals Influence of Compression Ratio on Flywheel Dimension for a Naturally Aspirated Spark Ignition Engine: A Numerical Study

2020 ◽  
Vol 3 (2) ◽  
Author(s):  
Aan Yudianto ◽  
Peixuan Li
Keyword(s):  
Compression Ratio ◽  
Numerical Study ◽  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Effective Pressure ◽  
Si Engine ◽  
Compression Stroke ◽  
Indicated Mean Effective Pressure ◽  
Proper Design

The proper design of the flywheel undeniably determines in tuning the engine to confirm the better output engine performance. The aim of this study is to mathematically investigate the effect of various values of the compression ratio on some essential parameters to determine the appropriate value for the flywheel dimension. A numerical calculation approach was proposed to eventually determine the dimension of the engine flywheel on a five-cylinder four-stroke Spark Ignition (SI) engine. The various compression ratios of 8.5, 9, 9.5, 10, 10.5, and 11 were selected to perform the calculations. The effects of compression ratio on effective pressure, indicated mean effective pressure (IMEP), dynamic irregularity value of the crankshaft, and the diameter of the flywheel was clearly investigated. The study found that 2.5 increment value of the compression ratio significantly increases the effective pressure of about 41.53% on the starting of the expansion stroke. While at the end of the compression stroke, the rise of effective pressure is about 76.67%, and the changes in dynamic irregularity merely increase by about 1.79%. The same trend applies to the flywheel diameter and width, which increases 2.08% for both.

Optimizing local charge stratification in a lean-burn spark ignition engine

1997 ◽  
Vol 211 (2) ◽  
pp. 145-154 ◽  
Author(s):  
C Arcoumanis ◽  
D. R. Hull ◽  
J. H. Whitelaw
Keyword(s):  
Equivalence Ratio ◽  
Peak Pressure ◽  
Spark Ignition ◽  
Flame Speed ◽  
Spark Ignition Engine ◽  
Local Injection ◽  
Combustion Pressure ◽  
Rich Mixture ◽  
Fuel Ratio ◽  
Homogeneous Charge

Gas pressure and local gas velocities have been measured in a single-cylinder spark ignition engine operating at low load and 1000 r/min and the results have characterized the extent to which combustion was enhanced by the injection of a small quantity of a mixture of propane vapour and air towards the spark plug in an otherwise quiescent chamber filled with a homogeneous lean propane/air charge. The effects of the locally generated mean flow/turbulence and equivalence ratio on combustion were examined separately by first injecting a mixture of equivalence ratio identical to that of the homogeneous charge and then a slightly rich mixture into homogeneous charges of lower equivalence ratios. The results show the advantageous effect of jet-induced local turbulence for overall air—fuel ratios between 17 and 24 with a maximum gain in peak pressure of 55 per cent at an air—fuel ratio of 20. The local injection of a rich mixture, in addition to increasing the gain in peak pressure from 30 to 50 per cent at an air—fuel ratio of 24, has extended the lean limit of the engine to 29. The timing of ignition relative to the end of injection, which varied as a function of the injection pressure, was found to have a strong effect on the peak combustion pressure so that, for example, a reduction of 8°(CA) in the time between the spark and the end of injection resulted in a 25 per cent reduction in combustion pressure at an air—fuel ratio of 22. The average flame speed was increased by local injection at all equivalence ratios; for example, a value of 7 m/s was obtained with local injection at an equivalence ratio of 0.7 which is equivalent to the flame speed measured with a homogeneous charge at the much higher equivalence ratio of 0.9.

scholarly journals A comprehensive numerical study of the ethanol blended fuel effect on the performance and pollutant emissions in spark-ignition engine

2014 ◽  
Vol 18 (1) ◽  
pp. 29-38 ◽  
Author(s):  
Motlagh Zangooee ◽  
Razavi Modarres
Keyword(s):  
Numerical Study ◽  
Load Condition ◽  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Pollutant Emissions ◽  
Injection System ◽  
Thermodynamic State ◽  
Point Injection ◽  
Blended Fuel

In the present work, the performance and pollutant emissions in a spark ignition engine has been numerically investigated. For this purpose, the coupled KIVA code with CHEMKIN is used to predict the thermodynamic state of the cylinder charge during each cycle. Computations were carried out for a four cylinder, four strokes, multi point injection system (XU7 engine). Numerical cases have been performed up to 30% vol. of ethanol. Engine simulations are carried out at 2000, 2500 and 3000 rpm and full load condition. The numerical results showed that pollutant emissions reduce with increase in ethanol content. Based on engine performance, the most suitable fraction of ethanol in the blend was found to be nearly 15% for the XU7 engine.

LPG Fueled Engine Under Kuwait Summer Climate

2002 ◽  
Author(s):  
Fuad N. Alasfour ◽  
Hassan K. Abdulraheem
Keyword(s):  
Co2 Emissions ◽  
Air Temperature ◽  
Equivalence Ratio ◽  
Engine Performance ◽  
Mechanical Efficiency ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Liquefied Petroleum Gas ◽  
Summer Climate ◽  
Brake Power

The purpose of this research is to investigate the effect of using LPG (liquefied petroleum gas) fuel on the performance of spark ignition engine under summer climate. A Hydra single-cylinder, spark ignition, water cooled engine was tested under elevated inlet air temperature. The effect of preheating inlet air from 25 to 60 °C to simulate Kuwait summer climate was investigated. Engine performance and the level of CO and CO2 emissions were measured experimentally using a gaseous Hydra research engine. The engine was fueled with local, commercial LPG. Several parameters were varied during the experimental work: fuel/air equivalence ratio, engine load and engine speed. The goal of this research was to investigate and simulate the effect of elevated inlet air temperature on the performance of car engine during summer season in Kuwait. The local LPG fuel is composed of 25% propane, 23% Iso-butane and 52% n-butane. Results show that the engine performance curves (brake power, brake specific fuel consumption and mechanical efficiency) have lower performance effect when inlet air temperature preheated from 25 to 60 °C, where the engine brake power dropped by 8% at equivalence ratio of 0.8. Carbon monoxide emission increased as inlet air preheated except at fuel air equivalence ratio less than 0.78. The present research provides a quantitative comparison of engine performance and CO and CO2 emissions between engine running at ambient and elevated inlet air temperature. Although there is a slight drop in the engine performance with heated inlet air, there is good reduction in the level of CO2.

A Turbocharged, Spark-Ignition Engine: Results From an Engine Cycle Simulation Including the Second Law of Thermodynamics

2009 ◽  
Author(s):  
Vaibhav J. Lawand ◽  
Jerald A. Caton
Keyword(s):  
Combustion Process ◽  
Engine Performance ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Second Law ◽  
Base Case ◽  
Mixing Processes ◽  
Automotive Engine ◽  
Cycle Simulation

The use of turbocharging systems for spark-ignition engines has seen increased interest in recent years due to the importance of fuel efficiency, and in some cases, increased performance. An example of a possible strategy is to use a smaller displacement engine with turbocharging rather than a larger engine without turbocharging. To better understand the tradeoffs and the fundamental aspects of a turbocharged engine, this investigation is aimed at determining the energy and exergy quantities for a range of operating conditions for a spark-ignition engine. A 3.8 liter automotive engine with a turbocharger and intercooler was selected for this study. Various engine performance and other output parameters were determined as functions of engine speed and load. For the base case (2000 rpm and a bmep of 1200 kPa), the bsfc was about 240 g/kW-h. At these conditions, the second law analysis indicated that the original fuel exergy was distributed as follows: 34.7% was delivered as indicated work, 16.9% was moved via heat transfer to the cylinder walls, 23.0% exited with the exhaust gases, 20.6% was destroyed during the combustion process, 2.5% was destroyed due to inlet mixing processes, and 1.9% was destroyed due to the exhaust processes. The turbocharger components including the intercooler were responsible for less than 1.0% of the fuel exergy destruction or transfer.

scholarly journals Spark ignition engine performance, standard emissions and particulates using GDI, PFI-CNG and DI-CNG systems

Fuel ◽  
2021 ◽  
Vol 293 ◽  
pp. 120454
Author(s):  
Mindaugas Melaika ◽  
Gilles Herbillon ◽  
Petter Dahlander
Keyword(s):  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Performance Standard

scholarly journals Numerical study on the effects of intake charge on oxy-fuel combustion in a dual-injection spark ignition engine at economical oxygen-fuel ratios

2021 ◽  
pp. 146808742110222
Author(s):  
Xiang Li ◽  
Yiqiang Pei ◽  
Zhijun Peng ◽  
Tahmina Ajmal ◽  
Khaqan-Jim Rana ◽  
...  
Keyword(s):  
Combustion Engine ◽  
Numerical Study ◽  
Carbon Capture And Storage ◽  
Spark Ignition ◽  
Fuel Combustion ◽  
Spark Ignition Engine ◽  
Gasoline Direct Injection ◽  
Brake Mean Effective Pressure ◽  
Dual Injection ◽  
Injection Strategies

In order to decrease Carbon Dioxide (CO2) emissions, Oxy-Fuel Combustion (OFC) technology with Carbon Capture and Storage (CCS) is being developed in Internal Combustion Engine (ICE). In this article, a numerical study about the effects of intake charge on OFC was conducted in a dual-injection. Spark Ignition (SI) engine, with Gasoline Direct Injection (GDI), Port Fuel Injection (PFI) and P-G (50% PFI and 50% GDI) three injection strategies. The results show that under OFC with fixed Oxygen Mass Fraction (OMF) and intake temperature, the maximum Brake Mean Effective Pressure (BMEP) is each 5.671, 5.649 and 5.646 bar for GDI, P-G and PFI strategy, which leads to a considerable decrease compared to Conventional Air Combustion (CAC). [Formula: see text], [Formula: see text] and [Formula: see text] of PFI are the lowest among three injection strategies. With intake temperature increases from 298 to 378 K, the reduction of BMEP can be up to 12.68%, 12.92% and 12.75% for GDI, P-G and PFI, respectively. Meantime, there is an increase of about 3% in Brake Specific Fuel Consumption (BSFC) and Brake Specific Oxygen Consumption (BSOC). Increasing OMF can improve the performance of BMEP and BSFC, and the trend is more apparent under GDI strategy. Besides, an increasing tendency can be observed for cylinder pressure and in-cylinder temperature under all injection strategies with the increase of OMF.

Sign in / Sign up

Export Citation Format

Share Document