The Coupling Model of Wellbore Conduit Flow, Throttled Flow and Formation Seepage in Water Injection Wells

2012 ◽  
Vol 594-597 ◽  
pp. 2486-2489
Author(s):  
Bao Jun Liu ◽  
Hai Xia Shi ◽  
Yun Sheng Cai
Keyword(s):  
Flow Rate ◽  
Water Injection ◽  
Coupling Model ◽  
Water Flooding ◽  
Finite Radius ◽  
Injection Wells ◽  
Conduit Flow ◽  
Injection Flow Rate ◽  
Injection Flow ◽  
Low Efficiency

Separate layer water flooding is adopted in most oilfields in China and the injection flow rate is controlled by the diameter of water nozzle of each layer. In order to ensure the effect of water injection, applicable water nozzles need to be adjusted to meet the requirements of injection flow rate. The adjustment is commonly realized according to experience, which leads to long adjustment time and low efficiency. To solve this problem, the coupling model of wellbore conduit flow, throttled flow and formation seepage was established based on theoretical analysis, which could provide theoretical basis for water nozzles adjustment. In the model, the Bernoulli Equation was adopted to analyze wellbore conduit flow; indoor experiments were done to research throttled flow; the research object of the seepage was finite radius well in homogeneous infinite formation.

scholarly journals Influência da vazão de injeção contínua de água no processo de recuperação de óleos: modelagem e simulação / Influence of continuous water injection flow rate in the oil recovery process: modeling and simulation

2021 ◽  
Vol 7 (4) ◽  
pp. 39963-39974
Author(s):  
Helton Gomes Alves ◽  
Hortência Luma Fernandes Magalhães ◽  
Veruska do Nascimento Simões ◽  
Wanessa Raphaella Gomes Dos Santos ◽  
Danielle Alves Ribeiro Da Silva ◽  
...  
Keyword(s):  
Modeling And Simulation ◽  
Flow Rate ◽  
Oil Recovery ◽  
Process Modeling ◽  
Water Injection ◽  
Recovery Process ◽  
Injection Flow Rate ◽  
Injection Flow

scholarly journals Evaluation of the impact of viscosity, injection volume, and injection flow rate on subcutaneous injection tolerance

2015 ◽  
pp. 473 ◽  
Author(s):  
Florence Schwarzenbach ◽  
Cecile Berteau ◽  
Orchidee Filipe-Santos ◽  
Tao Wang ◽  
Humberto Rojas ◽  
...  
Keyword(s):  
Flow Rate ◽  
Subcutaneous Injection ◽  
Injection Volume ◽  
Injection Flow Rate ◽  
Injection Flow ◽  
The Impact

scholarly journals Effect of Injection Flow Rate on Product Gas Quality in Underground Coal Gasification (UCG) Based on Laboratory Scale Experiment: Development of Co-Axial UCG System

Energies ◽  
2017 ◽  
Vol 10 (2) ◽  
pp. 238 ◽  
Author(s):  
Akihiro Hamanaka ◽  
Fa-qiang Su ◽  
Ken-ichi Itakura ◽  
Kazuhiro Takahashi ◽  
Jun-ichi Kodama ◽  
...  
Keyword(s):  
Flow Rate ◽  
Coal Gasification ◽  
Laboratory Scale ◽  
Underground Coal Gasification ◽  
Injection Flow Rate ◽  
Injection Flow ◽  
Product Gas ◽  
Scale Experiment

scholarly journals Polymer gels for controlling water thief zones in injection wells

2012 ◽  
Vol 5 (1) ◽  
pp. 37-44 ◽  
Author(s):  
Gustavo-Adolfo Maya-Toro ◽  
Rubén-Hernán Castro-García ◽  
Zarith del Pilar Pachón-Contreras. ◽  
Jose-Francisco Zapata-Arango
Keyword(s):  
Oil Recovery ◽  
Water Injection ◽  
Injection Wells ◽  
Recovery Processes ◽  
Injection Water ◽  
Secondary Oil Recovery ◽  
High Concentrations ◽  
Low Efficiency ◽  
Hydrolyzed Polyacrylamide ◽  
Positive Results

Oil recovery by water injection is the most extended technology in the world for additional recovery, however, formation heterogeneity can turn it into highly inefficient and expensive by channeling injected water. This work presents a chemical option that allows controlling the channeling of important amounts of injection water in specific layers, or portions of layers, which is the main explanation for low efficiency in many secondary oil recovery processes. The core of the stages presented here is using partially hydrolyzed polyacrylamide (HPAM) cross linked with a metallic ion (Cr+3), which, at high concentrations in the injection water (5000 – 20000 ppm), generates a rigid gel in the reservoir that forces the injected water to enter into the formation through upswept zones. The use of the stages presented here is a process that involves from experimental evaluation for the specific reservoir to the field monitoring, and going through a strict control during the well intervention, being this last step an innovation for this kind of treatments. This paper presents field cases that show positive results, besides the details of design, application and monitoring.

scholarly journals Characterization of venturi injector using dimensional analysis

2019 ◽  
Vol 23 (7) ◽  
pp. 484-491 ◽  
Author(s):  
Luiz R. Sobenko ◽  
José A. Frizzone ◽  
Antonio P. de Camargo ◽  
Ezequiel Saretta ◽  
Hermes S. da Rocha
Keyword(s):  
Dimensional Analysis ◽  
Flow Rate ◽  
Injection Rate ◽  
Operating Conditions ◽  
Functional Tests ◽  
Injection Flow Rate ◽  
Injection Flow ◽  
Hydraulic Conditions ◽  
Fluid Properties ◽  
Pi Theorem

ABSTRACT Venturi injectors are commonly employed for fertigation purposes in agriculture, in which they draw fertilizer from a tank into the irrigation pipeline. The knowledge of the amount of liquid injected by this device is used to ensure an adequate fertigation operation and management. The objectives of this research were (1) to carry out functional tests of Venturi injectors following requirements stated by ISO 15873; and (2) to model the injection rate using dimensional analysis by the Buckingham Pi theorem. Four models of Venturi injectors were submitted to functional tests using clean water as motive and injected fluid. A general model for predicting injection flow rate was proposed and validated. In this model, the injection flow rate depends on the fluid properties, operating hydraulic conditions and geometrical characteristics of the Venturi injector. Another model for estimating motive flow rate as a function of inlet pressure and differential pressure was adjusted and validated for each size of Venturi injector. Finally, an example of an application was presented. The Venturi injector size was selected to fulfill the requirements of the application and the operating conditions were estimated using the proposed models.

scholarly journals Increasing Efficiency of Field Water Re-Injection during Water-Flooding in Mature Hydrocarbon Reservoirs: A Case Study from the Sava Depression, Northern Croatia

2020 ◽  
Vol 12 (3) ◽  
pp. 786 ◽  
Author(s):  
Tomislav Malvić ◽  
Josip Ivšinović ◽  
Josipa Velić ◽  
Jasenka Sremac ◽  
Uroš Barudžija
Keyword(s):  
Water Injection ◽  
Inverse Distance Weighting ◽  
Hydrocarbon Reservoirs ◽  
Water Flooding ◽  
Injection Wells ◽  
Weighting Method ◽  
Hydrocarbon Production ◽  
Recovery Method ◽  
Distance Weighting ◽  
Inverse Distance

The authors analyse the process of water re-injection in the hydrocarbon reservoirs/fields in the Upper Miocene sandstone reservoirs, located in the western part of the Sava Depression (Croatia). Namely, this is the “A” field with “L” reservoir that currently produces hydrocarbons using a secondary recovery method, i.e., water injection (in fact, re-injection of the field waters). Three regional reservoir variables were analysed: Porosity, permeability and injected water volumes. The quantity of data was small for porosity reservoir “L” and included 25 points; for permeability and injected volumes of water, 10 points each were measured. This study defined selection of mapping algorithms among methods designed for small datasets (fewer than 20 points). Namely, those are inverse distance weighting and nearest and natural neighbourhood. Results were tested using cross-validation and isoline shape recognition, and the inverse distance weighting method is described as the most appropriate approach for mapping permeability and injected volumes in reservoir “L”. Obtained maps made possible the application of the modified geological probability calculation as a tool for prediction of success for future injection (with probability of 0.56). Consequently, it was possible to plan future injection more efficiently, with smaller injected volumes and higher hydrocarbon recovery. Prevention of useless injection, decreasing number of injection wells, saving energy and funds invested in such processes lead to lower environmental impact during the hydrocarbon production.

scholarly journals Influence of mineralization and injection flow rate on flow patterns in three-dimensional porous media

2019 ◽  
Vol 21 (27) ◽  
pp. 14605-14611 ◽  
Author(s):  
R. Moosavi ◽  
A. Kumar ◽  
A. De Wit ◽  
M. Schröter
Keyword(s):  
Porous Media ◽  
Flow Field ◽  
Flow Rate ◽  
Three Dimensional ◽  
Flow Patterns ◽  
Low Flow ◽  
Flow Rates ◽  
Injection Flow Rate ◽  
Injection Flow

At low flow rates, the precipitate forming at the miscible interface between two reactive solutions guides the evolution of the flow field.

Experimental Analysis of CO2 Injection on Permeability of Vuggy Carbonate Aquifers

2012 ◽  
Vol 135 (1) ◽  
Author(s):  
Ibrahim M. Mohamed ◽  
Jia He ◽  
Hisham A. Nasr-El-Din
Keyword(s):  
Flow Rate ◽  
Initial Permeability ◽  
Co2 Injection ◽  
Reaction Products ◽  
The Core ◽  
Injection Flow Rate ◽  
Injection Flow ◽  
Injection Scheme ◽  
Core Permeability ◽  
Permeability Alteration

Reactions of CO2 with formation rock may lead to an enhancement in the permeability due to rock dissolution, or damage (reduction in the core permeability) because of the precipitation of reaction products. The reaction is affected by aquifer conditions (pressure, temperature, initial porosity, and permeability), and the injection scheme (injection flow rate, CO2:brine volumetric ratio, and the injection time). The effects of temperature, injection flow rate, and injection scheme on the permeability alteration due to CO2 injection into heterogeneous dolomite rock is addressed experimentally in this paper. Twenty coreflood tests were conducted using Silurian dolomite cores. Thirty pore volumes of CO2 and brine were injected in water alternating gas (WAG) scheme under supercritical conditions at temperatures ranging from 21 to 121 °C, and injection rates of 2.0–5.0 cm3/min. Concentrations of Ca++, Mg++, and Na+ were measured in the core effluent samples. Permeability alteration was evaluated by measuring the permeability of the cores before and after the experiment. Two sources of damage in permeability were noted in this study: (1) due to precipitation of calcium carbonate, and (2) due to migration of clay minerals present in the core. Temperature and injection scheme don't have a clear impact on the core permeability. A good correlation between the initial and final core permeability was noted, and the ratio of final permeability to the initial permeability is lower for low permeability cores.

scholarly journals Seismic Response to Injection Well Stimulation in a High-Temperature, High-Permeability Reservoir

2021 ◽  
Author(s):  
C Hopp ◽  
Steven Sewell ◽  
S Mroczek ◽  
Martha Savage ◽  
John Townend
Keyword(s):  
High Temperature ◽  
Compressive Stress ◽  
Flow Rate ◽  
Matched Filter ◽  
Taupo Volcanic Zone ◽  
Valuable Insight ◽  
High Permeability ◽  
Injection Flow Rate ◽  
Well Stimulation ◽  
Injection Flow

©2019. American Geophysical Union. All Rights Reserved. Fluid injection into the Earth's crust can induce seismic events that cause damage to local infrastructure but also offer valuable insight into seismogenesis. The factors that influence the magnitude, location, and number of induced events remain poorly understood but include injection flow rate and pressure as well as reservoir temperature and permeability. The relationship between injection parameters and injection-induced seismicity in high-temperature, high-permeability reservoirs has not been extensively studied. Here we focus on the Ngatamariki geothermal field in the central Taupō Volcanic Zone, New Zealand, where three stimulation/injection tests have occurred since 2012. We present a catalog of seismicity from 2012 to 2015 created using a matched-filter detection technique. We analyze the stress state in the reservoir during the injection tests from first motion-derived focal mechanisms, yielding an average direction of maximum horizontal compressive stress (SHmax) consistent with the regional NE-SW trend. However, there is significant variation in the direction of maximum compressive stress (σ1), which may reflect geological differences between wells. We use the ratio of injection flow rate to overpressure, referred to as injectivity index, as a proxy for near-well permeability and compare changes in injectivity index to spatiotemporal characteristics of seismicity accompanying each test. Observed increases in injectivity index are generally poorly correlated with seismicity, suggesting that the locations of microearthquakes are not coincident with the zone of stimulation (i.e., increased permeability). Our findings augment a growing body of work suggesting that aseismic opening or slip, rather than seismic shear, is the active process driving well stimulation in many environments.

scholarly journals Effect of the Pumping-injection flow rate on Heat Transfer Characteristic of Borehole Heat Exchangers for Coupling Ground-Source Heat Pump System

2020 ◽  
Author(s):  
Jiuchen Ma ◽  
Qian Jiang ◽  
Qiuli Zhang ◽  
Yacheng Xie ◽  
Yahui Wang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Flow Rate ◽  
Heat Exchangers ◽  
Transfer Characteristic ◽  
Ground Source Heat Pump ◽  
Pump System ◽  
Heat Pump System ◽  
Injection Flow Rate ◽  
Injection Flow ◽  
Ground Source

Abstract A coupling ground source heat pump system (CGSHP) is established in areas where groundwater is shallow but the seepage velocity is weak, which sets up pumping and injection wells on both sides of borehole heat exchangers (BHEs). A convection-dispersion analytical model of excess temperature in aquifer that considers groundwater forced seepage and axial effects and thermal dispersion effects is proposed. A controllable forced seepage sandbox is built by equation analysis method and similarity criteria. Through indoor test and the proposed analytical model, the correctness and accuracy of the numerical simulation software FEFLOW7.1 is verified. The influence of different pumping-injection flow rate on the heat transfer characteristic of BHEs is studied by numerical simulation. The results show that the average heat efficiency coefficient of BHEs increases and the heat influence range of downstream BHEs expands with the increasing of pumping-injection flow rate. The relation curve between Pe and the increment of heat transfer rate per unit depth of BHEs (Δ`q) is distributed as Gaussian function. The pumping-injection flow rate that makes Darcy velocity reaches 0.6×10-6~1.4×10-6 m∙s-1 in the aquifer is the best reference range for CGSHP system，so 400~600 m3∙d-1 is taken as the best pumping-injection flow rate in this paper.

Sign in / Sign up

Export Citation Format

Share Document