Production of Forged Rolls High-Quality Instrument from Adamite Steel

2012 ◽  
Vol 628 ◽  
pp. 482-485
Author(s):  
Yulia A. Lukina ◽  
Andrey V. Stepanov ◽  
Evgeny N. Bobrov
Keyword(s):  
Mechanical Properties ◽  
Heat Treatments ◽  
Manufacturing Technology ◽  
High Quality ◽  
Heavy Machinery ◽  
Microstructure And Mechanical Properties ◽  
Quality Instrument

The paper deals with manufacturing technology for the forged rolls and sleeves from adamite steel at Electrostal Plant of Heavy Machinery (JSC «EZTM»). The influence of different heat treatments on microstructure and mechanical properties of the level of adamite steel is presented.

Influence of Heat Treatment on Microstructure and Mechanical Properties of Selective Laser Melted TiAl6V4 Alloy

2018 ◽  
Vol 284 ◽  
pp. 615-620 ◽  
Author(s):  
R.M. Baitimerov ◽  
P.A. Lykov ◽  
L.V. Radionova
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Selective Laser Melting ◽  
Room Temperature ◽  
Base Alloy ◽  
Tensile Tests ◽  
Heat Treatments ◽  
Laser Melting ◽  
Microstructure And Mechanical Properties ◽  
Treatment Procedures

TiAl6V4 titanium base alloy is widely used in aerospace and medical industries. Specimens for tensile tests from TiAl6V4 with porosity less than 0.5% was fabricated by selective laser melting (SLM). Specimens were treated using two heat treatment procedures, third batch of specimens was tested in as-fabricated statement after machining. Tensile tests were carried out at room temperature. Microstructure and mechanical properties of SLM fabricated TiAl6V4 after different heat treatments were investigated.

Effects of heat treatments on the microstructure and mechanical properties of Rene 80

2013 ◽  
Vol 43 ◽  
pp. 66-73 ◽  
Author(s):  
Caixiong Yang ◽  
Yulai Xu ◽  
Heng Nie ◽  
Xueshan Xiao ◽  
Guoqing Jia ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatments ◽  
Microstructure And Mechanical Properties

scholarly journals Preparation and Mechanical Properties of ZK61-Y Magnesium Alloy Wheel Hub via Liquid Forging—Isothermal Forging Process

Metals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 385
Author(s):  
Yushi Qi ◽  
Heng Wang ◽  
Lili Chen ◽  
Hongming Zhang ◽  
Gang Chen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Heat Treatments ◽  
Second Phase ◽  
Phase Hardening ◽  
Isothermal Forging ◽  
Forging Process ◽  
Microstructure And Mechanical Properties ◽  
Alloy Wheel

A ZK61-Y magnesium (Mg) alloy wheel hub was prepared via liquid forging—isothermal forging process. The effects of Y-element contents on the microstructure and mechanical properties of liquid forging blanks were investigated. The formation order of the second phase was I-phase (Mg3Zn6Y) → W-phase (Mg3Zn3Y2) → Z-phase (Mg12ZnY) with the increase of the Y-element content. Meanwhile, the I-phase and Z-phase formed in the liquid forging process were beneficial to the grain refinement. The numerical simulation of the isothermal forging process was carried out to analyze the effects of forming temperature on the temperature and stress field in the forming parts using the software Deform-3D. Isothermal forging experiments and post heat treatments were conducted. The influence of isothermal forging temperature, heat treatment temperature and preservation time on the microstructure and mechanical properties of the forming parts were also studied. The dynamic recrystallization (DRX), second-phase hardening, and work hardening account for the improvement of properties after the isothermal forging process. The forming part forged at 380 °C displayed the outstanding properties. The elongation, yield strength, and ultimate tensile strength were 18.5%, 150 MPa and 315 MPa, respectively. The samples displayed an increased elongation and decreased strength after heat treatments. The 520 °C—1 h sample possessed the best mechanical properties, the elongation was 25.5%, the yield stress was 125 MPa and the ultimate tensile strength was 282 MPa. This can be ascribed to the recrystallization and the elimination of working hardening. Meanwhile, the second phase transformation (I-phase → W-phase → Mg2Y + MgZn2), dissolution, and decomposition can be observed, as well.

Effects of heat treatments on microstructure and mechanical properties of Mg-15Gd-5Y-0.5Zr alloy

2008 ◽  
Vol 26 (2) ◽  
pp. 298-302 ◽  
Author(s):  
Yan GAO ◽  
Qudong WANG ◽  
Jinhai GU ◽  
Yang ZHAO ◽  
Yan TONG ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatments ◽  
Microstructure And Mechanical Properties

Comparison of Microstructure and Mechanical Properties of Semi-Solid Castings Produced Using Billets Made by EMS and SEED

2014 ◽  
Vol 217-218 ◽  
pp. 332-339 ◽  
Author(s):  
Xiao Kang Liang ◽  
Da Quan Li ◽  
Pascal Côté ◽  
Stephen P. Midson ◽  
Qiang Zhu
Keyword(s):  
Mechanical Properties ◽  
Cross Section ◽  
Dendritic Structure ◽  
Casting Process ◽  
Grain Structure ◽  
High Quality ◽  
Microstructure And Mechanical Properties ◽  
Grain Structures ◽  
Heat Treated ◽  
Semi Solid

The spheroidal grains in billets used for semi-solid casting are generally manufactured by electromagnetic stirring (EMS) during the casting process. This method however, is not economically applicable for small quantities of the thixo billets. Swirled Enthalpy Equilibration Device (SEED) has been developed as a rheocasting process, and the SEED process is of interest for developing new thixo alloys, as well as for optimizing the thixocasting processes for high quality components. The objective of this paper is to compare the microstructure and mechanical properties of aluminum alloy 319s billets and castings produced using EMS and SEED feed materials. The experimental results show that for as-cast billets made from SEED process, a well-developed spheroidal grain structure is distributed throughout the cross-section of the billet, while for as-cast EMS billets, the grain structure is inhomogeneous, i.e., a dendritic structure was present adjacent to the surface of the billet, while a uniform, spheroidal structure was present at the centre. After the thixocasting process, however, the both SEED and EMS billets have well-developed, spheroidal grain structures. Mechanical properties of thixocast and T61 heat treated components are comparable for the both SEED and EMS billets.

Characterization of Precipitate Distributions in Modified S5 Tool Steels

1997 ◽  
Vol 3 (S2) ◽  
pp. 691-692
Author(s):  
K.C. Hsieh ◽  
E.A. Kenik
Keyword(s):  
Mechanical Properties ◽  
Cooling Rate ◽  
Tool Steel ◽  
Heat Treatments ◽  
Tool Steels ◽  
Tempered Martensite ◽  
Microstructure And Mechanical Properties

There has been increasing interest from industry to characterize the different precipitate distributions in ferrous materials to account for different mechanical properties that are observed. For this study, two different heat treatments were chosen for the experimental S5 tool steel, modified to have 0.24 wt% C. Alloy S5-1 received 1 hour of austenitizing at 970°C, was quenched at rate of 140°C/s and tempered for 1 hour at 200°C. Alloy S5-2 received 40 minutes of austenitizing at 940°C, was quenched at rate of 16°C/s and tempered for 1 hour at 200 °C. In this relatively low hardenability steel, both S5-1 and S5-2 show mixed microstructures of tempered martensite and bainite (Fig. 1, 2). Not surprisingly, the slower cooling rate for S5-2 created an alloy with inferior microstructure and mechanical properties. Even though these differences in precipitate distributions, could not directly account for differences in mechanical properties, it is of interest to study how the different heat treatments affected the precipitate distributions in S5-1 and S5-2.

Sign in / Sign up

Export Citation Format

Share Document