Study on the Hydrolysis of Pollen in Pure Water under Microwave Irradiation

2013 ◽  
Vol 683 ◽  
pp. 222-225
Author(s):  
Huan Wang ◽  
Li Li Geng ◽  
Bo Wu ◽  
Na Liu ◽  
Dong Zhang

Pinus massoniana pollen was hydrolyzed by using the method of orthogonal experiment in pure water under microwave irradiation. The main influence factors of pollen microwave hydrolysis reaction was confirmed as temperature, weight ratio of pollen to water, microwave power and the reaction time, and its effects on the pollen microwave hydrolysis reaction was studied in detail. The results showed that the sequence of influence factors was reaction temperature>weight ratio of pollen to water>microwave power>reaction time. The optimal reaction conditions was that the temperature, 120oC; the power, 120W; the reaction time, 150min; the weight ratio of pollen to water, 1:10.

2014 ◽  
Vol 900 ◽  
pp. 293-296
Author(s):  
Bo Wu ◽  
Qing Hua Feng ◽  
Li Li Geng ◽  
Ke Wen Shu ◽  
Dong Zhang

In this article, the main influence factors of ganoderma lucidum spore powder hydrolysis in pure water under microwave irradiation were studied by using the method of orthogonal experiment. Weight ratio of ganoderma lucidum spore powder to water, reaction time, microwave power and temperature was considered as the influence factors in detail. It was concluded that the temperature was the main factor in hydrolytic process. The order of the influence factors: temperature > weight ratio of ganoderma lucidum spore powder to water > microwave power > reaction time. And the optimal reaction condition was as the temperature 150 °C, weight ratio of ganoderma lucidum spore powder to water 1:40, microwave power 100 W and reaction time 105 min.


2014 ◽  
Vol 1008-1009 ◽  
pp. 101-106
Author(s):  
Lian Hai Ren

The process of biodiesel made from waste cooking oil via acid catalyst was studied in order to eliminate the waste cooking oil pollution and realize the health of waste oil use. The optimum conditions of biodiesel made from waste cooking oil, effect of reaction time, alcohol-oil ratio and catalyst dosage to the biodiesel conversion were explored by using orthogonal experiment design. The results showed that the conversion of biodiesel is 95.2% under the conditions of the reaction time is 2h, the alcohol-oil ratio is 6:1, the catalyst dosage is 1.5%, and the influence factors can be arranged as follows: reaction time > catalyst dosage > alcohol-oil ratio.


2018 ◽  
Vol 156 ◽  
pp. 06005
Author(s):  
Lailatul Qadariyah ◽  
Mahfud Renova Panjaitan ◽  
Fatkhulloh Mujaddid ◽  
Ummu Kalsum

Microalga is one of the potential feedstocks in the manufacture of biodiesel because it contains high oil content. In this study, Chlorella sp. was selected because its high oil content about 28-32% of oil (based on its dry weight) and its presence is abundant among other green algae. In situ transesterification was carried out in round neck flask under microwave irradiation. Microwave irradiation can facilitate the in situ transesterification by extracted the lipid of microalga and simultaneous convert to FAME. The purposes of this study are to investigate the effect of acid catalyst concentration, microwave power, reaction time and the addition of co-solvent (n-hexane) on the yield of biodiesel, to get optimum operating conditions and to know the fatty acid compounds of biodiesel from Chlorella sp. The results of oil extraction and biodiesel were analyzed by GC-MS analysis. Based on the experiment, the yield of microalga oil was 11.37%. The optimum yield of biodiesel by in-situ transesterification was 75.68%. It was obtained at the microwave power of 450 watts, the reaction time of 60 minutes, an acid catalyst concentration of 0,2M of H2SO4, and the co-solvent addition of 10 ml.


2014 ◽  
Vol 1078 ◽  
pp. 36-39
Author(s):  
Zhi De Liu ◽  
Xin Zhang ◽  
Mi Mi Wang ◽  
Dong Zhang

A study for optimizing the experimental conditions for the hydrolysis of polyethylene terephthalate (PET) catalyzed by carbonates was performed. The main influence factors of PET microwave hydrolytic reaction, such as the reaction temperature, time and catalyst dosage, were confirmed and these effects on the catalysis of PET microwave hydrolysis were studied in detail. The results showed that the sequence of influence factors was reaction temperature>reaction time> catalyst dosage. The optimal experimental conditions under the catalyst of basic zinc carbonate were that the catalyst dosage, 0.75%; the reaction time, 210 min; the reaction temperature, 200°C.


2018 ◽  
Vol 279 ◽  
pp. 230-234 ◽  
Author(s):  
Pham Van Thinh ◽  
Nguyen Duy Trinh ◽  
Nguyen Thi Thuong ◽  
Van Thi Thanh Ho ◽  
Bui Thi Phuong Quynh ◽  
...  

In this study, we prepared the exfoliated graphite (EG) using microwave-assisted exfoliation synthesis exfoliated graphite from the inexpensive natural Vietnamese graphite flakes as the precursors. The exfoliation of graphite was conducted employing intercalation method using H2O2 as oxidizing agent and H2SO4 as intercalating agent. The influent of the precursors (VH2O2/VH2SO4) (1.0/20 – 2.0/20), pH value of EG (1-6), time intercalation (70-120 min), microwave power (180-720 W), and time microwave (10-60 second) in the exfoliation volume of EG was investigated.


2014 ◽  
Vol 893 ◽  
pp. 23-26 ◽  
Author(s):  
Na Liu ◽  
Yong Shuai Ma ◽  
Ke Wen Shu ◽  
Bo Wu ◽  
Dong Zhang

The catalytic effect of Brønsted acidic ionic liquid for PET hydrolysis reaction under microwave irradiation has been investigated through orthogonal experiment in this article, and the influence of main reaction conditions has also been studied. The results shown that the influence level sequence of reaction factors was: catalyst kind > reaction time > reaction temperature > catalyst dosage. According to a further study of catalyst dosages influence on PET depolymerization degree, the optimal reaction condition was finally concluded as below: [Hexanemi [HSO4] used as catalyst, catalyst dosage: 0.01 mol/2 g PET, reaction time: 210 min, reaction temperature: 195 °C.


2012 ◽  
Vol 518-523 ◽  
pp. 3427-3431
Author(s):  
Na Ning ◽  
Lian Hai Ren

Biodiesel was made from waste cooking oil via acid catalyst in order to eliminate the waste cooking oil pollution and realize the health of waste oil use. The optimum conditions of biodiesel made from waste cooking oil, effect of reaction time, alcohol-oil ratio and catalyst dosage to the biodiesel conversion were explored by using orthogonal experiment design. The results showed that the conversion of biodiesel is 95.2% under the conditions of the reaction time is 2h, the alcohol-oil ratio is 6:1, the catalyst dosage is 1.5%, and the influence factors can be arranged as follows: reaction time > catalyst dosage > alcohol-oil ratio.


2020 ◽  
Vol 7 (2) ◽  
pp. 145-156
Author(s):  
Pravinkumar Patil ◽  
Gangadhar Bhopalkar ◽  
Sainath Zangade

Background: The various industrial processes have a diverse effect on the environment through pollution. In view of these observations, some environmentally benign synthetically protocols have developed under green chemistry. For rapid and sustainable synthesis, the microwave irradiation (MI) has gained popularity as a powerful tool compared to conventional synthesis. The present study describes the synthesis of novel substituted 1, 3-diaryl-2-propene-1-one derivative using alumina supported K3PO4-MWI combination. Objective: Chalcones are important compounds which are widely spread in nature like in fruits, vegetables, tea, spices, etc. The 2’-hydroxy derivative of chalcones plays an important role in the synthesis of bioactive compounds. The present communication deals with a convenient and rapid synthesis of 1, 3-diaryl-2-propene-1-one under the support of alumina-tripotassium phosphate and microwave irradiation. Our efforts are focused on the introduction of typical and easier route for the synthesis of title compounds using a microwave. All synthesized chalcones have been screened and evaluated for the antioxidant activity by DPPH and nitric oxide radical scavenging. Some of these compounds are found to be more potent scavengers and may lead to the development of a new class of antioxidants. Methods: The α, β-unsaturated carbonyl functionality contains two electrophilic centers allowing them to undergo addition and cyclization reactions with different nucleophiles. In the literature survey, we found that Chalcones were synthesized using tripotassium phosphate catalyst under refluxing by a conventional method. A novel method for the synthesis of 1, 3-diaryl-2-propene-1-one via Claisen Schmidt has been introduced by reacting substituted 2’- hydroxyl acetonaphthones with substituted aromatic aldehydes under the support of basic alumina –tripotassium phosphate via microwave radiations. Formation of corresponding Chalcones was confirmed by spectral studies followed by their screening for antioxidant activity. The scavenging activity is expressed in terms of % inhibition and IC50 value (μg/ml). Results: The structures of newly synthesized Chalcones were confirmed and in good agreement with obtained spectral analysis such as IR, NMR, Mass and elemental analysis. Commercially available basic alumina and tripotassium phosphate in combination of microwave were utilized and found to be effective, convenient route for the synthesis of 1, 3-diaryl-2-propene-1-one derivatives with desirable yields in short reaction time (5-12 min). The results of antioxidant activity revealed that the IC50 value for compounds 3a, 3d, 3e, 3f, 3g, 3h, 3j, 3l and 3n are lower than that of standard ascorbic acid to scavenge DPPH radical. This indicates that these compounds are more significant scavengers in comparison with standard drug. On the other hand, compounds 3a, 3b, 3c, 3d, 3g, 3l and 3n are more potent scavengers for NO free radical. Conclusion: We have introduced an efficient, ecofriendly, simple and fast microwave assisted method using basic alumina-tripotassium phosphate for the synthesis of 1, 3-diaryl-2-propene-1- one derivatives. Microwave irradiation provides an effective way for the preparation of Chalcones in terms of several advantages as a simple procedure, short reaction time, milder reaction condition, cleaner reaction and excellent yield. The scavenging activity of chalcones against DPPH and NO free radicals showed excellent properties of antioxidants.


2021 ◽  
Vol 67 (1) ◽  
Author(s):  
Monika Aniszewska ◽  
Krzysztof Słowiński ◽  
Ewa Tulska ◽  
Witold Zychowicz

AbstractThe paper proposes the use of microwave irradiation to lower the initial moisture content of wood chips. The study involved willow and fir chips fractionated by means of a sieve separator and unfractionated ash chips. The wood chips were exposed to a constant microwave power of 800 W for 30 s, 60 s, 120 s and 180 s. The chips were weighed before and after irradiation to measure loss of moisture. It was found that the decline in moisture content increased with wood chip size for a given irradiation time and microwave power. The initial moisture content of wood chips was not found to significantly affect loss of moisture as the drying rates of wood chips with higher and lower moisture content exposed to microwaves were not statistically different. The results showed that irradiation intensity increased with the time of exposure to microwaves and unit radiant energy per unit of evaporated moisture decreased with increasing wood chip size in the 3.15–31.50 mm range.


Author(s):  
Mousumi Chakraborty ◽  
Vaishali Umrigar ◽  
Parimal A. Parikh

The present study aims at assessing the effect of microwave irradiation against thermal heat on the production of N-acetyl-p-anisidine by acetylation of p-anisidine. The acetylation of p-anisidine under microwave irradiation produces N-acetyl-p-anisidine in shorter reaction times, which offers a benefit to the laboratories as well as industries. It also eliminates the use of excess solvent. Effects of operating parameters such as reaction time, feed composition, and microwave energy and reaction temperature on selectivity to the desired product have been investigated. The results indicate as high as a 98% conversion of N-acetyl-p-anisidine can be achieved within 12-15 minutes using acetic acid. The use of acetic acid as an acetylating agent against conventionally used acetic anhydride eliminates the handling of explosive acetic anhydride and also the energy intensive distillation step for separation of acetic acid. Organic solvent like acetic anhydride are not only hazardous to the environment, they are also expensive and flammable.


Sign in / Sign up

Export Citation Format

Share Document