Study on the Optimal Hydrolysis Conditions of Ganoderma lucidum Spore Powder under Microwave Irradiation

2014 ◽  
Vol 900 ◽  
pp. 293-296
Author(s):  
Bo Wu ◽  
Qing Hua Feng ◽  
Li Li Geng ◽  
Ke Wen Shu ◽  
Dong Zhang

In this article, the main influence factors of ganoderma lucidum spore powder hydrolysis in pure water under microwave irradiation were studied by using the method of orthogonal experiment. Weight ratio of ganoderma lucidum spore powder to water, reaction time, microwave power and temperature was considered as the influence factors in detail. It was concluded that the temperature was the main factor in hydrolytic process. The order of the influence factors: temperature > weight ratio of ganoderma lucidum spore powder to water > microwave power > reaction time. And the optimal reaction condition was as the temperature 150 °C, weight ratio of ganoderma lucidum spore powder to water 1:40, microwave power 100 W and reaction time 105 min.

2013 ◽  
Vol 683 ◽  
pp. 222-225
Author(s):  
Huan Wang ◽  
Li Li Geng ◽  
Bo Wu ◽  
Na Liu ◽  
Dong Zhang

Pinus massoniana pollen was hydrolyzed by using the method of orthogonal experiment in pure water under microwave irradiation. The main influence factors of pollen microwave hydrolysis reaction was confirmed as temperature, weight ratio of pollen to water, microwave power and the reaction time, and its effects on the pollen microwave hydrolysis reaction was studied in detail. The results showed that the sequence of influence factors was reaction temperature>weight ratio of pollen to water>microwave power>reaction time. The optimal reaction conditions was that the temperature, 120oC; the power, 120W; the reaction time, 150min; the weight ratio of pollen to water, 1:10.


2011 ◽  
Vol 391-392 ◽  
pp. 1149-1152
Author(s):  
Qi Dong Yan ◽  
Jun Xu ◽  
Feng Xu

The paper has studied the process of using H2O2 as oxidant and tungsten acid as catalyst, catalytic oxidation synthesis process of cyclopentene to glutaraldehyde and explored the main influence factors of the reaction, including the reaction time, reaction temperature, catalyst dosage and solvent. Furthermore, the quantitative analysis and qualitative analysis of the product was characterized by gas chromatography. The optimum synthetic condition was as follows: tertiary butanol as solvent, tungsten acid: boron anhydride(mass ratio)=1:1, 30%H2O2 as oxidant, the reaction temperature 35°C, the reaction time 4h, the yield of glutaraldehyde yield was 46%.


2014 ◽  
Vol 1008-1009 ◽  
pp. 101-106
Author(s):  
Lian Hai Ren

The process of biodiesel made from waste cooking oil via acid catalyst was studied in order to eliminate the waste cooking oil pollution and realize the health of waste oil use. The optimum conditions of biodiesel made from waste cooking oil, effect of reaction time, alcohol-oil ratio and catalyst dosage to the biodiesel conversion were explored by using orthogonal experiment design. The results showed that the conversion of biodiesel is 95.2% under the conditions of the reaction time is 2h, the alcohol-oil ratio is 6:1, the catalyst dosage is 1.5%, and the influence factors can be arranged as follows: reaction time > catalyst dosage > alcohol-oil ratio.


2018 ◽  
Vol 156 ◽  
pp. 06005
Author(s):  
Lailatul Qadariyah ◽  
Mahfud Renova Panjaitan ◽  
Fatkhulloh Mujaddid ◽  
Ummu Kalsum

Microalga is one of the potential feedstocks in the manufacture of biodiesel because it contains high oil content. In this study, Chlorella sp. was selected because its high oil content about 28-32% of oil (based on its dry weight) and its presence is abundant among other green algae. In situ transesterification was carried out in round neck flask under microwave irradiation. Microwave irradiation can facilitate the in situ transesterification by extracted the lipid of microalga and simultaneous convert to FAME. The purposes of this study are to investigate the effect of acid catalyst concentration, microwave power, reaction time and the addition of co-solvent (n-hexane) on the yield of biodiesel, to get optimum operating conditions and to know the fatty acid compounds of biodiesel from Chlorella sp. The results of oil extraction and biodiesel were analyzed by GC-MS analysis. Based on the experiment, the yield of microalga oil was 11.37%. The optimum yield of biodiesel by in-situ transesterification was 75.68%. It was obtained at the microwave power of 450 watts, the reaction time of 60 minutes, an acid catalyst concentration of 0,2M of H2SO4, and the co-solvent addition of 10 ml.


2013 ◽  
Vol 781-784 ◽  
pp. 131-134
Author(s):  
Hai Yan Du ◽  
Jing Fan ◽  
Wei Ming Wu

This paper investigated several influencing factors for the preparation of solid alcohol, including the amount of raw materials used such as stearic acid and copper nitrate and so on, and the temperature, etc. Through single factor experiments, the main influence factors of preparing solid alcohol were determined. And, on this basis, in view of three remarkable influence factors: the stearic acid amount used, the copper nitrate amount used and the temperature, the orthogonal experiment was carried out. Finally, the optimal preparation conditions were determined as follows: 25ml industrial alcohol, 1.3g stearic acid, 1.2ml 10% copper nitrate solution, at 75°C, pH 8, the cooling way is gradual cooling with no refluxing.


2018 ◽  
Vol 279 ◽  
pp. 230-234 ◽  
Author(s):  
Pham Van Thinh ◽  
Nguyen Duy Trinh ◽  
Nguyen Thi Thuong ◽  
Van Thi Thanh Ho ◽  
Bui Thi Phuong Quynh ◽  
...  

In this study, we prepared the exfoliated graphite (EG) using microwave-assisted exfoliation synthesis exfoliated graphite from the inexpensive natural Vietnamese graphite flakes as the precursors. The exfoliation of graphite was conducted employing intercalation method using H2O2 as oxidizing agent and H2SO4 as intercalating agent. The influent of the precursors (VH2O2/VH2SO4) (1.0/20 – 2.0/20), pH value of EG (1-6), time intercalation (70-120 min), microwave power (180-720 W), and time microwave (10-60 second) in the exfoliation volume of EG was investigated.


2012 ◽  
Vol 476-478 ◽  
pp. 2284-2287
Author(s):  
Yong Sheng Ma ◽  
Lin Tong Wang ◽  
Xian Hui Sun ◽  
Yun Fa Chen ◽  
Zeng Liu

Cationic polymethyl acrylate emulsion which was prepared with no soap emulsion polymerization was used in bleached wheat straw pulp as papermaking retention agent. The main influence factors on retention effect, such as dosage of polymethyl acrylate emulsion, pH value of the bleached wheat straw pulp, reaction time after adding the polymethyl acrylate emulsion and stir velocity were discussed in detail. Experimental results showed that optimal application conditions were that first step was adding cationic emulsion which dosage was 0.64% relative to dry fiber, stir velocity was 1400r/min, 90s for reaction, second step was adding anion components which dosage was 0.16% relative to dry fiber, stir velocity was 750r/min, 60s for reaction, pH value was 4.5~5.0. The cationic organic particles system has good retention aid effect which one pass retention was 96.4%.


2014 ◽  
Vol 893 ◽  
pp. 23-26 ◽  
Author(s):  
Na Liu ◽  
Yong Shuai Ma ◽  
Ke Wen Shu ◽  
Bo Wu ◽  
Dong Zhang

The catalytic effect of Brønsted acidic ionic liquid for PET hydrolysis reaction under microwave irradiation has been investigated through orthogonal experiment in this article, and the influence of main reaction conditions has also been studied. The results shown that the influence level sequence of reaction factors was: catalyst kind > reaction time > reaction temperature > catalyst dosage. According to a further study of catalyst dosages influence on PET depolymerization degree, the optimal reaction condition was finally concluded as below: [Hexanemi [HSO4] used as catalyst, catalyst dosage: 0.01 mol/2 g PET, reaction time: 210 min, reaction temperature: 195 °C.


2012 ◽  
Vol 518-523 ◽  
pp. 3427-3431
Author(s):  
Na Ning ◽  
Lian Hai Ren

Biodiesel was made from waste cooking oil via acid catalyst in order to eliminate the waste cooking oil pollution and realize the health of waste oil use. The optimum conditions of biodiesel made from waste cooking oil, effect of reaction time, alcohol-oil ratio and catalyst dosage to the biodiesel conversion were explored by using orthogonal experiment design. The results showed that the conversion of biodiesel is 95.2% under the conditions of the reaction time is 2h, the alcohol-oil ratio is 6:1, the catalyst dosage is 1.5%, and the influence factors can be arranged as follows: reaction time > catalyst dosage > alcohol-oil ratio.


2020 ◽  
Vol 7 (2) ◽  
pp. 145-156
Author(s):  
Pravinkumar Patil ◽  
Gangadhar Bhopalkar ◽  
Sainath Zangade

Background: The various industrial processes have a diverse effect on the environment through pollution. In view of these observations, some environmentally benign synthetically protocols have developed under green chemistry. For rapid and sustainable synthesis, the microwave irradiation (MI) has gained popularity as a powerful tool compared to conventional synthesis. The present study describes the synthesis of novel substituted 1, 3-diaryl-2-propene-1-one derivative using alumina supported K3PO4-MWI combination. Objective: Chalcones are important compounds which are widely spread in nature like in fruits, vegetables, tea, spices, etc. The 2’-hydroxy derivative of chalcones plays an important role in the synthesis of bioactive compounds. The present communication deals with a convenient and rapid synthesis of 1, 3-diaryl-2-propene-1-one under the support of alumina-tripotassium phosphate and microwave irradiation. Our efforts are focused on the introduction of typical and easier route for the synthesis of title compounds using a microwave. All synthesized chalcones have been screened and evaluated for the antioxidant activity by DPPH and nitric oxide radical scavenging. Some of these compounds are found to be more potent scavengers and may lead to the development of a new class of antioxidants. Methods: The α, β-unsaturated carbonyl functionality contains two electrophilic centers allowing them to undergo addition and cyclization reactions with different nucleophiles. In the literature survey, we found that Chalcones were synthesized using tripotassium phosphate catalyst under refluxing by a conventional method. A novel method for the synthesis of 1, 3-diaryl-2-propene-1-one via Claisen Schmidt has been introduced by reacting substituted 2’- hydroxyl acetonaphthones with substituted aromatic aldehydes under the support of basic alumina –tripotassium phosphate via microwave radiations. Formation of corresponding Chalcones was confirmed by spectral studies followed by their screening for antioxidant activity. The scavenging activity is expressed in terms of % inhibition and IC50 value (μg/ml). Results: The structures of newly synthesized Chalcones were confirmed and in good agreement with obtained spectral analysis such as IR, NMR, Mass and elemental analysis. Commercially available basic alumina and tripotassium phosphate in combination of microwave were utilized and found to be effective, convenient route for the synthesis of 1, 3-diaryl-2-propene-1-one derivatives with desirable yields in short reaction time (5-12 min). The results of antioxidant activity revealed that the IC50 value for compounds 3a, 3d, 3e, 3f, 3g, 3h, 3j, 3l and 3n are lower than that of standard ascorbic acid to scavenge DPPH radical. This indicates that these compounds are more significant scavengers in comparison with standard drug. On the other hand, compounds 3a, 3b, 3c, 3d, 3g, 3l and 3n are more potent scavengers for NO free radical. Conclusion: We have introduced an efficient, ecofriendly, simple and fast microwave assisted method using basic alumina-tripotassium phosphate for the synthesis of 1, 3-diaryl-2-propene-1- one derivatives. Microwave irradiation provides an effective way for the preparation of Chalcones in terms of several advantages as a simple procedure, short reaction time, milder reaction condition, cleaner reaction and excellent yield. The scavenging activity of chalcones against DPPH and NO free radicals showed excellent properties of antioxidants.


Sign in / Sign up

Export Citation Format

Share Document