Structure, Magnetic Properties and Magnetocaloric Effect of Dy-Doped CeFe2 Alloys

2013 ◽  
Vol 700 ◽  
pp. 75-78 ◽  
Author(s):  
Wen Jiang Feng ◽  
Ming Gao ◽  
Hao Hua Zhang ◽  
Yan He
Keyword(s):  
Magnetic Field ◽  
Magnetic Properties ◽  
Magnetocaloric Effect ◽  
Phase Structure ◽  
Laves Phase ◽  
Field Change ◽  
Arc Melting ◽  
Magnetic Field Change ◽  
Xrd Patterns ◽  
Curie Temperatures

Ce1-xDyxFe1.9(x = 0, 0.02, 0.05, 0.1) alloys were prepared successfully by means of arc-melting and the following homogenization. XRD patterns show all alloys are indexed as MgCu2-type C15 cubic Laves phase structure. With the Dy substitution of Ce, the Curie temperatures from ferro-to para-magnetism become gradually enlarged. The values of for a magnetic-field change from 0-5 T at 234, 246, 268, 303 K are 31.7, 26.4, 21.8, and 17.2 J kg-1K-1for x = 0, 0.02, 0.05, and 1, respectively.

Magnetocaloric Effect in Ni-Mn-Ga and Ni-Co-Mn-In Heusler Alloys

2009 ◽  
Vol 1200 ◽  
Author(s):  
Vasiliy Buchelnikov ◽  
Sergey Taskaev ◽  
Mikhail Drobosyuk ◽  
Vladimir Sokolovskiy ◽  
Viktor Koledov ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Magnetocaloric Effect ◽  
Curie Point ◽  
Direct Method ◽  
Heusler Alloys ◽  
Field Change ◽  
Adiabatic Temperature Change ◽  
Magnetic Field Change ◽  
A Direct Method ◽  
The Magnetic Field

AbstractThe positive magnetocaloric effect (MCE) in the vicinity of the Curie point in Ni2+xMn1-xGa (x=0.33, 0.36, 0.39) Heusler alloys and the negative and positive MCE near the metamagnetostructural (MMS) transition and the Curie point, respectively, in Ni45Co5Mn36.5In13.5 Heusler alloy has been measured by a direct method. For the magnetic field change ΔH = 2 T, the maximal adiabatic temperature change ΔTad at the Curie point in Ni2+xMn1-xGa alloys is larger than 0.6 K. For Ni45Co5Mn36.5In13.5 alloy, the maximal value of ΔTad = 1.68 K (for the same magnetic field change, ΔH = 2 T) is observed at the MMS phase transition temperature.

Magnetic Properties and Magnetocaloric Effect of Gd3Ni in Crystalline and Amorphous States

2012 ◽  
Vol 190 ◽  
pp. 355-358 ◽  
Author(s):  
D.A. Shishkin ◽  
N.V. Baranov ◽  
A.V. Proshkin ◽  
S.V. Andreev ◽  
A.S. Volegov
Keyword(s):  
Magnetic Field ◽  
Magnetocaloric Effect ◽  
Entropy Change ◽  
Rapid Quenching ◽  
Antiferromagnetic Order ◽  
Cooling Power ◽  
Ferromagnetic Behavior ◽  
Field Change ◽  
Ni Alloy ◽  
Magnetic Field Change

The liquid quenched Gd3Ni alloy is observed to exhibit a ferromagnetic behavior below TC = 117 K unlike crystalline compound having an antiferromagnetic order at T < TN = 99 K. Rapid quenching from the melt results in a considerable enhancement of the magnetocaloric effect in Gd3Ni at low magnetic fields. The maximal value of the isothermal magnetic entropy change at a magnetic field change of 20 kOe for the amorphous Gd3Ni surpasses by more than 8 times the SM value for the polycrystalline counterpart. The relative cooling power for the amorphous Gd3Ni alloy is estimated as 265 J kg-1 and 676 J kg-1 at a magnetic field change of 20 kOe and 50 kOe, respectively.

The Magnetocaloric Effect in Ni-Mn-X (X=Ga, in) Heusler Alloys and Manganites with Magnetic Transition close to Room Temperature

2010 ◽  
Vol 168-169 ◽  
pp. 165-168
Author(s):  
Vasiliy D. Buchelnikov ◽  
Mikhail Drobosyuk ◽  
E.A. Smyshlyaev ◽  
O.O. Pavlukhina ◽  
A.V. Andreevskikh ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Magnetocaloric Effect ◽  
Room Temperature ◽  
Direct Method ◽  
Magnetic Transition ◽  
Heusler Alloys ◽  
Field Change ◽  
Adiabatic Temperature Change ◽  
Magnetic Field Change ◽  
The Magnetic Field

The magnetocaloric effect (MCE) in theNi2+xMn1-xGa (x = 0.33, 0.36, 0.39), Ni50Mn25In25, Ni54Mn21Ga18In7, Ni53.5Mn21.5Ga16In9, Ni45Co5Mn36.5In13.5 Heusler alloys and in the La0.7BayCa0.3-yMnO3 (y = 0.12, 0.24, 0.3) manganites at the Curie points have been measured by the direct method. For the magnetic field change H = 2 T, the maximal adiabatic temperature change Tad in the Ni2+xMn1-xGa alloys is larger than 0.6 K. For the Ni50Mn25In25 alloy the maximal value of Tad = 1.51 K (for the same magnetic field change H = 2 T) is observed at the magnetic phase transition temperature.

Magnetic Properties of Tb(Ni0.95Fe0.05)3 Crystalline Compound and Powder

2013 ◽  
Vol 203-204 ◽  
pp. 292-295 ◽  
Author(s):  
Krzysztof Ociepka ◽  
Ania Bajorek ◽  
Artur Chrobak ◽  
Grażyna Chełkowska
Keyword(s):  
Crystal Structure ◽  
Magnetic Properties ◽  
Magnetocaloric Effect ◽  
Milling Time ◽  
Crystalline Compound ◽  
X Ray Diffraction ◽  
X Ray ◽  
Arc Melting ◽  
Melting Technique ◽  
Xrd Patterns

The magnetic properties and the crystal structure of the ball-milled Tb(Ni0.95Fe0.05)3compound have been studied by using magnetization measurements and X-ray diffraction (XRD). The results were compared with those obtained for the bulk compound prepared by arc-melting technique. The investigated sample is polycrystalline and crystallizes in the rhombohedral PuNi3type of crystal structure (space group R-3m). With the increase of the time milling (i.e. 1 h, 24 h and 48 h) a for-mation of grains less than 1μm and a reduction of magnetocaloric effect have been observed. The analysis of XRD patterns for ball-milled powders shows that after 48h milling time there is still visible a crystalline structure.

The Influence of the Purity of Gd on the Magnetocaloric Effect in Gd5Si2-XGe2-XZn2x Alloys

2011 ◽  
Vol 685 ◽  
pp. 311-315
Author(s):  
Zhi Zeng ◽  
Xue Zhen Wang ◽  
Jian Huang ◽  
Jie Xiang ◽  
Xue Ling Hou
Keyword(s):  
Magnetic Field ◽  
External Magnetic Field ◽  
Magnetocaloric Effect ◽  
Curie Point ◽  
Magnetic Entropy Change ◽  
Entropy Change ◽  
Magnetic Entropy ◽  
Field Change ◽  
Magnetic Field Change ◽  
Giant Magnetocaloric Effect

Gd5Si2Ge2-based alloys can exhibit a giant magnetocaloric effect (GMCE) which gives them the potential use in the cooling technologies[1].Through this studies, it can be found that the purity of Gd had a great impact on the magnetocaloric effect in Gd5Si2-xGe2-xZn2x alloys. When 3N Gd used and 2x=0.01, Gd5Si2-xGe2-xZn2x around the curie point of 280k get the maximum magnetic entropy change of 14.0 J/(Kg.K) under the external magnetic field change from 0 to 1T, but when 2N Gd used and 2x=0.05, Gd5Si2-xGe2-xZn2x around the curie point of 284.2k under the external magnetic field change 1T get the maximum magnetic entropy change 6.65 J/(Kg.K).

Direct and Inverse Magnetocaloric Effect in Ni1.81Mn1.64In0.55 Multifunctional Heusler Alloy

2015 ◽  
Vol 233-234 ◽  
pp. 183-186 ◽  
Author(s):  
Rafael Fayzullin ◽  
Vasiliy D. Buchelnikov ◽  
Mikhail Drobosyuk ◽  
Alexey Mashirov ◽  
Alexander Kamantsev ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Phase Transition ◽  
Magnetocaloric Effect ◽  
Heusler Alloy ◽  
Direct Method ◽  
Field Change ◽  
Adiabatic Temperature Change ◽  
Phase Transition Temperatures ◽  
Magnetic Field Change ◽  
The Magnetic Field

The magnetocaloric effect (MCE) in Ni1.81Mn1.64In0.55 Heusler alloy has been measured by the direct method. The field dependences of the magnetization were obtained. The phase transition temperatures were determined. The maximal adiabatic temperature change ΔTad near the Curie temperature is 1.8 K under the magnetic field change ∆H = 18 kOe. The inverse MCE (∆Tad = -3.72 K) in the same field change takes place near the temperature of martensitic transformation.

scholarly journals Effect of Nd, Pr substitutional atoms on the magnetic and magnetostrictive properties in (Tb-Dy)(Fe-Co)2 Laves phases

2021 ◽  
Vol 2103 (1) ◽  
pp. 012196
Author(s):  
G A Politova ◽  
M A Ganin ◽  
A B Mikhailova ◽  
D A Morozov ◽  
K E Pankov ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Magnetic Properties ◽  
Laves Phase ◽  
Type Structure ◽  
Partial Substitution ◽  
Laves Phases ◽  
Temperature Range ◽  
Homogenizing Annealing ◽  
Arc Melting ◽  
Magnetostrictive Materials

Abstract Polycrystalline TbxDy1-xR0.1Fe2-zCoz (R = Nd, Pr, x = 0.2, 0.3; z = 0, 1.3) cubic Laves phase alloys with MgCu2-type structure were prepared by arc melting followed by homogenizing annealing. The crystal structure, magnetic properties, and magnetostriction have been investigated. Compounds with high values of magnetostrictive susceptibility were found in the temperature range 150-300 K. Compounds with partial substitution of cobalt for iron demonstrate a change in the sign of anisotropic magnetostriction. This work continues the search for magnetostrictive materials with inexpensive neodymium and praseodymium.

Refrigerant Capacity and Magnetocaloric Effect on LaFe11.1Co0.8Si1.1BX Alloys

2011 ◽  
Vol 84-85 ◽  
pp. 667-670
Author(s):  
Guo Qiu Xie
Keyword(s):  
Magnetocaloric Effect ◽  
Room Temperature ◽  
Magnetic Entropy Change ◽  
Entropy Change ◽  
Magnetic Entropy ◽  
Field Change ◽  
Refrigerant Capacity ◽  
Structure Phase ◽  
Magnetic Field Change ◽  
Cubic Structure

In this paper, we report on the structure, magnetic properties and magnetocaloric effect in NaZn13-type LaFe11.1Co0.8Si1.1Bxalloys close to room temperature. The stable NaZn13cubic structure phase (space group isFm-3c) can easily obtained by annealing at 1080 °C for 225 hours. The maximal values of magnetic entropy change for LaFe11.1Co0.8Si1.1Bx(x=0.2, 0.25) were found to be 5.3 and 5.9 J/kg K at Curie temperature for a magnetic field change in 0-1.5 T, respectively. The calculated refrigerant capacity for a field change in 0–1.5 T is about 147 and 107 J/kg K, for LaFe11.1Co0.8Si1.1B0.2and LaFe11.1Co0.8Si1.1B0.25respectively, which is as larger as those of Gd(99.3%) alloy

Microstructure and Magnetic Properties of RE2.28Fe13.58B1.14 Alloys

2016 ◽  
Vol 848 ◽  
pp. 709-714 ◽  
Author(s):  
Gang Fu ◽  
Jiang Wang ◽  
Mao Hua Rong ◽  
Guang Hui Rao ◽  
Huai Ying Zhou
Keyword(s):  
Crystal Structure ◽  
Magnetic Properties ◽  
Rare Earth ◽  
Single Phase ◽  
Permanent Magnets ◽  
Industrial Applications ◽  
Arc Melting ◽  
Light Rare Earth Elements ◽  
Curie Temperatures ◽  
Microstructure And Magnetic Properties

The rare-earth (RE) permanent magnets based on Nd2Fe14B with excellent magnetic properties have been widely used in industrial applications. In this work, the crystal structure, microstructure and magnetic properties of Nd2.28Fe13.58B1.14, Ce2.28Fe13.58B1.14 and Pr2.28Fe13.58B1.14 alloys prepared by arc-melting were investigated. The results show that all alloys are single phase with tetragonal Nd2Fe14B-type (space group P42/mnm). The Curie temperatures (Tc) of RE2.28Fe13.58B1.14 (RE=Nd, Ce, Pr) alloys are 583 K, 423 K and 557 K, respectively. On the other hand, the coercivities of Nd2.28Fe13.58B1.14 and Pr2.28Fe13.58B1.14 alloys are about 1.05 T and 1.23 T, respectively, while that of Ce2.28Fe13.58B1.14 alloy is only about 0.25 T due to the poor squareness of hysteresis loop. Meanwhile, the saturation magnetizations of Nd2.28Fe13.58B1.14 and Pr2.28Fe13.58B1.14 alloys are about 135 emu/g and 113 emu/g, respectively, while that of Ce2.28Fe13.58B1.14 alloy is about 97 emu/g. It was indicated that the Curie temperatures and magnetic properties of RE2.28Fe13.58B1.14 alloys with the same crystal structure are dependent on light rare earth elements.

Sign in / Sign up

Export Citation Format

Share Document