Finite Element Analysis about the Influence that High-Speed Motorized Spindle Spindle System Material has on its Temperature Field

2013 ◽  
Vol 712-715 ◽  
pp. 1209-1212 ◽  
Author(s):  
Ke Zhang ◽  
Xiang Nan Ma ◽  
Li Xiu Zhang ◽  
Wen Da Yu ◽  
Yu Hou Wu
Keyword(s):  
Heat Transfer ◽  
Finite Element ◽  
Temperature Field ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
High Speed ◽  
Ceramic Materials ◽  
Motorized Spindle ◽  
Element Analysis ◽  
Finite Element Software

The article has analyzed the changes of temperature of different materials of the spindle, and considered 170SD30 Ceramic Motorized Spindle and the same model Metal Motorized Spindle as the research objects, analyzed the inside heat source and heat transfer mechanism of the high-speed motorized spindle; used finite element software to set up the model of the motorized spindle, and did simulation and analysis. Verified by simulation, heat transfer rate of ceramic materials is slower than the metallic materials, in actual operation of the process, due to different materials have different heat transfer rate, so the temperature distribution of the different materials of motorized spindle are different. This conclusion provides the basis to solve motorized spindle temperature field distribution.

Finite Element Analysis on Thermal Characteristics of Lathe Motorized Spindle

2011 ◽  
Vol 311-313 ◽  
pp. 2434-2439 ◽  
Author(s):  
Ping Ma ◽  
Biao Zhou ◽  
Hai Peng Li
Keyword(s):  
Finite Element ◽  
Temperature Field ◽  
High Speed ◽  
Thermal Characteristic ◽  
Thermal Characteristics ◽  
Internal Heat ◽  
Transfer Coefficients ◽  
Motorized Spindle ◽  
Element Analysis ◽  
Spindle Unit

Abstract．High-speed motorized spindle is a promising technology widely used in high speed machining．The lathe motorized spindle is the key component of the high speed NC lathe and the thermal characteristics of the lathe motorized spindle is one of the major factors influencing the performance of the machine tools．In order to improve the accuracy and reliability of the high speed NC lathe，the thermal characteristic of the high speed NC motorized spindle has been studied in this paper．Firstly，the structure feature of the spindle has been introduced and two major internal heat sources of motorized spindle have been investigated．Secondly，the heat transfer coefficients of the major components of the lathe spindle have been conducted．Then，the 2D temperature field model has been developed with finite element method．Based on it, the temperature field and temperature rises of the spindle have been simulated and the reasonability of temperature distribution of the spindle unit has also been discussed．The research results provide the reference to evaluate of the thermal behavior of the high speed NC motorized spindle．

Thermal Analysis Based on Finite Element Analysis for Motorized Spindle

2014 ◽  
Vol 556-562 ◽  
pp. 1170-1173 ◽  
Author(s):  
Dong Man Yu ◽  
Yan Hui Hu ◽  
Di Wang ◽  
Xiao Jing Li
Keyword(s):  
Thermal Analysis ◽  
Finite Element ◽  
High Speed ◽  
Element Model ◽  
Basic Structure ◽  
Numerical Control ◽  
Maximum Temperature ◽  
Motorized Spindle ◽  
Element Analysis ◽  
Finite Element Software

High-speed motorized spindle is a key device of modern industry and has been widely used in numerical control machine. Temperature distribution, speed control loading characteristics, precision maintenance, liberation intensity and circumgyration error are not only the key demand of motorized spindle's capability but also an important index to evaluate it's performance. Therefore, this study has detailed described the main structure of motorized spindle. The basic structure and working principal was introduced, and then demonstrated a series of models and specifications of motorized spindle. The finite element model of high-speed motorized spindle was built up and carried out thermal analysis to study the heat generation and heat transfer. With the help of ANSYS finite element software, the temperature field distribution and the temperature rise condition for motorized spindle were analyzed. The result shows that the front bearing has a higher temperature than that of back bearing. The maximum temperature of inner ring is bigger than that of outer ring. The results contribute to selection of appropriate bearing for motorized spindle system.

Design of Special Fixture for Micro High Speed Motorized Spindle

2011 ◽  
Vol 228-229 ◽  
pp. 66-71
Author(s):  
Xiao Hong Lu ◽  
Zhen Yuan Jia ◽  
Zhi Cong Zhang ◽  
Xv Jia
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Speed ◽  
Micro Milling ◽  
Machining Accuracy ◽  
Milling Machine ◽  
Cnc Milling ◽  
Analysis Method ◽  
Motorized Spindle ◽  
Element Analysis

The fixture of motorized spindle significantly affect the vibration of micro high speed CNC milling machine, its performance can directly affect the machining accuracy of the entire micro milling machine. A special fixture of high-speed motorized spindle is designed in the paper and its static characteristics are checked by utilizing ANSYS finite element analysis software. To guarantee the sufficient strength of bolts and the safety of motorized spindle when the motorized spindle runs at high speed, theory analysis method and ANSYS finite element analysis method are used to make the strength check of the fixture. The designed special fixture for high speed motorized spindle plays an important part in the design of high-speed motorized spindle.

Thermal Characteristics Finite Element Analysis and Temperature Rise Experiment for High Speed Motorized Spindle

2011 ◽  
Vol 52-54 ◽  
pp. 1206-1211 ◽  
Author(s):  
Huai Xing Wen ◽  
Mei Yan Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Machine Tool ◽  
Temperature Rise ◽  
High Speed ◽  
Thermal Characteristics ◽  
Analysis Model ◽  
Ansys Software ◽  
Motorized Spindle ◽  
Element Analysis

The thermal characteristics of the motorized spindle determines maching qualities and cutting capabilities, and is one of the important factors influencing the precision of the high speed NC machine tool. To improve the performance of the high speed machine tool, it is important to study the thermal characteristics of the motorized spindle. It had been studied in two ways: one is finite element analysis by Ansys software, in which the finite element analysis model was built. According to the actual working condition, the heat source and the heat transfer coefficient of every part are calculated. On this basis, the temperature field and temperature rises were gotten in Ansys software. The other way is temperature rises experiment on the motorized spindle test platform. The result was shown in the form of curve. These two ways shown the same result: the highest temperature rise appears in the area of electromotor, then followed by the rolling bearing .The result provides the necessary theory basis for optimizing the structure of the motorized spindle and establishes a basis for the research and application about the high speed spindle.

Structure and Finite Element Analysis for a Permanent Magnet Bias Axial Magnetic Bearing

2011 ◽  
Vol 383-390 ◽  
pp. 4803-4809
Author(s):  
Xu Sheng Zhao ◽  
Zhi Quan Deng ◽  
Bo Wang ◽  
Chun Hua
Keyword(s):  
Finite Element ◽  
Permanent Magnet ◽  
High Speed ◽  
Magnetic Bearing ◽  
Magnetic Suspension ◽  
Low Loss ◽  
Theory Analysis ◽  
Element Analysis ◽  
Finite Element Software ◽  
Magnetic Field Simulation

A new permanent magnet bias axial magnetic bearing (PMAB) is introduced, then the structure and operation principle are analyzed. The equivalent magnetic circuit is established to deduce the mathematic expression. The parameter design and calculation of the magnetic bearing are presented including available area of magnetic pole, ampere - turns of control coils etc. The parameters of the proposed prototype are also given. The 3-D magnetic field simulation is performed by using the Finite Element software. The theory analysis and the simulation show that the maximum suspension magnetic force satisfies the design requirement. The magnetic suspension forces have better linearity and symmetry around the balanced position. Therefore, the proposed PMAB is suitable for the high speed or low loss occasions.

Optimization Design Based on DEFORM-3D Finite Element Analysis about Steel Rolling Production

2011 ◽  
Vol 480-481 ◽  
pp. 1079-1084 ◽  
Author(s):  
Jian Hua Ren ◽  
Wei Wang ◽  
Rong Liu
Keyword(s):  
Finite Element ◽  
Production Process ◽  
Optimum Design ◽  
High Speed ◽  
Optimization Design ◽  
Rolling Process ◽  
Element Analysis ◽  
Steel Rolling ◽  
Finite Element Software ◽  
Actual Production

This paper took the high-speed wire rod rolling process of φ20 bar as the research object, to be simulated numerically under the work platform of the finite element software DEFORM. The simulation results were compared with the actual operation of the production process, the rolling simulation reappeared the actual production situation, realized the visualization of the rolling process. After analysis, the defects of rolling technology were found out. Based on the research, the optimum design was gotten and then simulated which improved the actual production process and avoided the original defects. The optimum design is feasible to practical production and reduce the cost of test in practice The paper just focused on the first one of 12 rolling process as an example to show the simulating process and results.

Dynamic Analysis of a High-Speed Grinding Spindle

2011 ◽  
Vol 215 ◽  
pp. 89-94 ◽  
Author(s):  
Jing Zhu Pang ◽  
Bei Zhi Li ◽  
Jian Guo Yang ◽  
Zhou Ping Wu
Keyword(s):  
Finite Element ◽  
Dynamic Analysis ◽  
High Speed ◽  
Grinding Wheel ◽  
Static Characteristics ◽  
Motorized Spindle ◽  
Element Analysis ◽  
Spindle System ◽  
The Finite Element Analysis ◽  
High Speed Grinding

This paper presents the effects of spindle system configuration on the dynamic and static characteristics of high speed grinding. A 3D physical mode of high-speed grinding motorized spindle system with rotation speed of 150m/s was provided. The motorized spindle system consists of bearings, rotor, stator, spindle housing and grinding wheel. Based on the finite element method (FEM), the static characteristics, dynamic and the transient response are analyzed based on the finite element analysis software NASTRAN. It is shown that the spindle overhanging, bearing span have a significant effort on spindle deflection. The dynamic analysis shows no resonance will happen during its speed range. The methods and solutions for the motorized spindle system design and engineering applications was given in this paper.

Performance Evaluation of Tube-in-Tube Heat Exchanger Using Nanofluids

2015 ◽  
Vol 787 ◽  
pp. 72-76 ◽  
Author(s):  
V. Naveen Prabhu ◽  
M. Suresh
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Pressure Drop ◽  
Heat Transfer Rate ◽  
Thermal Performance ◽  
Transfer Rate ◽  
Flow Characteristics ◽  
Operating Conditions ◽  
Element Analysis ◽  
Tube Heat Exchanger

Nanofluids are fluids containing nanometer-sized particles of metals, oxides, carbides, nitrides, or nanotubes. They exhibit enhanced thermal performance when used in a heat exchanger as heat transfer fluids. Alumina (Al2O3) is the most commonly used nanoparticle due to its enhanced thermal conductivity. The work presented here, deals with numerical simulations performed in a tube-in-tube heat exchanger to study and compare flow characteristics and thermal performance of a tube-in-tube heat exchanger using water and Al2O3/water nanofluid. A local element-by-element analysis utilizing e-NTU method is employed for simulating the heat exchanger. Profiles of hot and cooling fluid temperatures, pressure drop, heat transfer rate along the length of the heat exchanger are studied. Results show that heat exchanger with nanofluid gives improved heat transfer rate when compared with water. However, the pressure drop is more, which puts a limit on the operating conditions.

Effect of Superhydrophobicity on Impinging Droplet Heat Transfer

2010 ◽  
Author(s):  
Gary Rosengarten ◽  
Rita Tschaut
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
High Speed ◽  
Cold Water ◽  
Preliminary Investigation ◽  
Infrared Camera ◽  
Contact Angles ◽  
Superhydrophobic Surfaces ◽  
Droplet Shape

In this study we present a preliminary investigation into the effect of hydrophobicity on the heat transfer rate due to the impingement of cold water droplets on heated flat surfaces. Two extreme contact angles were compared; hydrophilic (∼20°) and superhydrophobic (∼160°) using different surface coatings on a thin metal substrates. Images of the droplet impingement were simultaneously recorded by a high speed camera and a high speed, high resolution infrared camera so we could correlate droplet shape and dynamics to the heat transfer rate. There is a large effect on both the droplet fluid dynamics and heat transfer between hydrophilic and superhydrophobic surfaces. The heat transfer difference between the superhydrophobic and hydrophilic cases is a complex interplay between the increased droplet contact line velocity due to induced slip and the insulating properties of the air gap. Overall we have shown significant reductions in both the instantaneous heat transfer rates and the overall cooling effect of droplets impinging on superhydrophobic surfaces relative to those for hydrophilic surfaces. In the range of droplet velocities varied (We = 50 to 190) there was little dependency of the heat transfer or fluid flow with impact velocity, due to the dominance of inertial forces.

Sign in / Sign up

Export Citation Format

Share Document