A Multi-Scale Non-Deterministic Approach to Composite Curing Process Simulation

2013 ◽  
Vol 750-752 ◽  
pp. 11-15 ◽  
Author(s):  
Pierpaolo Carlone ◽  
Gaetano S. Palazzo
Keyword(s):  
Mechanical Properties ◽  
Process Simulation ◽  
Computational Models ◽  
Curing Process ◽  
Trial And Error ◽  
Deterministic Approach ◽  
Cure Process ◽  
Stochastic Perturbations ◽  
Multi Scale ◽  
Macro Scale

Thermosetting matrix composite materials are often subject to a curing process to enhance the mechanical properties of the final product. In recent years computational models of the curing process allowed for a remarkable time and cost compression with respect to trial and error procedures. Most of the proposed models, however, rely on deterministic hypothesis. In this paper a multi-scale non deterministic approach to cure process simulation has been proposed, evidencing the effect of stochastic perturbations of fibers distribution on simulative results on macro-scale.

Comparing Micro- and Macro-Level Rheological Properties of Polymeric and Reclaimed Asphalt Pavement-Modified Asphalt Binders

2021 ◽  
pp. 036119812110288
Author(s):  
Tandra Bagchi ◽  
Zahid Hossain ◽  
Mohammed Ziaur Rahaman ◽  
Gaylon Baumgardner
Keyword(s):  
Mechanical Properties ◽  
Scale Effects ◽  
Asphalt Pavement ◽  
Linear Trend ◽  
Asphalt Binders ◽  
Reclaimed Asphalt Pavement ◽  
Reclaimed Asphalt ◽  
Multi Scale ◽  
Macro Scale ◽  
Scale Properties

Multi-scale evaluation of the rheological and mechanical properties of asphalt binder has substantial importance in understanding the binder’s micro- and macro-scale properties. This study compares the macro- and micro-scale mechanistic properties of asphalt binders. Test samples used in this study include performance grade binders (PG 64-22) from two different sources along with their modified counterparts. The modifiers include polyphosphoric acid (PPA), styrene-butadiene-styrene (SBS), a combination of SBS and PPA, and reclaimed asphalt pavement. To achieve the goal of this study, atomic force microscope technology was utilized to estimate the asphalt binder’s micro-mechanical properties (e.g., Derjaguin, Muller, Toropov modulus and deformation). On the other hand, data on the macro-scale properties—such as rutting factor (G*/sinδ), consistency and penetration—of the selected binders were analyzed and compared with the aforementioned micro-level properties. The comparative analyses indicated that the micro-mechanical properties of asphalt binders followed a linear trend with the macro-scale properties. The findings of this study are expected to help researchers and pavement professionals in modeling asphalt materials when multi-scale effects are deemed to be necessary.

Multi-scale finite element modeling of 3D printed structures subjected to mechanical loads

2018 ◽  
Vol 24 (1) ◽  
pp. 177-187 ◽  
Author(s):  
Dalia Calneryte ◽  
Rimantas Barauskas ◽  
Daiva Milasiene ◽  
Rytis Maskeliunas ◽  
Audrius Neciunas ◽  
...  
Keyword(s):  
Finite Element ◽  
Composite Structures ◽  
Computational Models ◽  
Three Dimensional ◽  
Structural Response ◽  
Content Type ◽  
Multi Scale ◽  
Macro Scale ◽  
Internal Constitution ◽  
3D Printed

Purpose The purpose of this paper is to investigate the influence of geometrical microstructure of items obtained by applying a three-dimensional (3D) printing technology on their mechanical strength. Design/methodology/approach Three-dimensional printed items (3DPI) are composite structures of complex internal constitution. The buildup of the finite element (FE) computational models of 3DPI is based on a multi-scale approach. At the micro-scale, the FE models of representative volume elements corresponding to different additive layer heights and different thicknesses of extruded fibers are investigated to obtain the equivalent non-linear nominal stress–strain curves. The obtained results are used for the creation of macro-scale FE models, which enable to simulate the overall structural response of 3D printed samples subjected to tensile and bending loads. Findings The validation of the models was performed by comparing the computed results against the experimental ones, where satisfactory agreement has been demonstrated within a marked range of thicknesses of additive layers. Certain inadequacies between computed against experimental results were observed in cases of thinnest and thickest additive layers. The principle explanation of the reasons of inadequacies takes into account the poorer quality of mutual adhesion in case of very thin extruded fibers and too-early solidification effect. Originality/value Flexural and tensile experiments are simulated by FE models that are created with consideration to microstructure of 3D printed samples.

scholarly journals Multi-scale mechanical characterization of highly swollen photo-activated collagen hydrogels

2015 ◽  
Vol 12 (102) ◽  
pp. 20141079 ◽  
Author(s):  
Giuseppe Tronci ◽  
Colin A. Grant ◽  
Neil H. Thomson ◽  
Stephen J. Russell ◽  
David J. Wood
Keyword(s):  
Mechanical Properties ◽  
Type I Collagen ◽  
Wound Care ◽  
Wound Dressings ◽  
Type I ◽  
Structure Property ◽  
Multi Scale ◽  
Macro Scale ◽  
Collagen Hydrogels ◽  
Tunable Mechanical Properties

Biological hydrogels have been increasingly sought after as wound dressings or scaffolds for regenerative medicine, owing to their inherent biofunctionality in biological environments. Especially in moist wound healing, the ideal material should absorb large amounts of wound exudate while remaining mechanically competent in situ . Despite their large hydration, however, current biological hydrogels still leave much to be desired in terms of mechanical properties in physiological conditions. To address this challenge, a multi-scale approach is presented for the synthetic design of cyto-compatible collagen hydrogels with tunable mechanical properties (from the nano- up to the macro-scale), uniquely high swelling ratios and retained (more than 70%) triple helical features. Type I collagen was covalently functionalized with three different monomers, i.e. 4-vinylbenzyl chloride, glycidyl methacrylate and methacrylic anhydride, respectively. Backbone rigidity, hydrogen-bonding capability and degree of functionalization ( F : 16 ± 12–91 ± 7 mol%) of introduced moieties governed the structure–property relationships in resulting collagen networks, so that the swelling ratio ( SR : 707 ± 51–1996 ± 182 wt%), bulk compressive modulus ( E c : 30 ± 7–168 ± 40 kPa) and atomic force microscopy elastic modulus ( E AFM : 16 ± 2–387 ± 66 kPa) were readily adjusted. Because of their remarkably high swelling and mechanical properties, these tunable collagen hydrogels may be further exploited for the design of advanced dressings for chronic wound care.

scholarly journals Study of biaxial mechanical properties of the passive pig heart: material characterisation and categorisation of regional differences

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Fulufhelo Nemavhola
Keyword(s):  
Mechanical Properties ◽  
Constitutive Model ◽  
Computational Models ◽  
Heart Diseases ◽  
Interventricular Septum ◽  
Model Material ◽  
Biaxial Test ◽  
Material Behaviour ◽  
Material Parameters ◽  
Biaxial Tests

AbstractRegional mechanics of the heart is vital in the development of accurate computational models for the pursuit of relevant therapies. Challenges related to heart dysfunctioning are the most important sources of mortality in the world. For example, myocardial infarction (MI) is the foremost killer in sub-Saharan African countries. Mechanical characterisation plays an important role in achieving accurate material behaviour. Material behaviour and constitutive modelling are essential for accurate development of computational models. The biaxial test data was utilised to generated Fung constitutive model material parameters of specific region of the pig myocardium. Also, Choi-Vito constitutive model material parameters were also determined in various myocardia regions. In most cases previously, the mechanical properties of the heart myocardium were assumed to be homogeneous. Most of the computational models developed have assumed that the all three heart regions exhibit similar mechanical properties. Hence, the main objective of this paper is to determine the mechanical material properties of healthy porcine myocardium in three regions, namely left ventricle (LV), mid-wall/interventricular septum (MDW) and right ventricle (RV). The biomechanical properties of the pig heart RV, LV and MDW were characterised using biaxial testing. The biaxial tests show the pig heart myocardium behaves non-linearly, heterogeneously and anisotropically. In this study, it was shown that RV, LV and MDW may exhibit slightly different mechanical properties. Material parameters of two selected constitutive models here may be helpful in regional tissue mechanics, especially for the understanding of various heart diseases and development of new therapies.

Determination of mechanical properties of two-phase and hybrid nanocomposites: experimental determination and multiscale modeling

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Mahmoud Haghighi ◽  
Hossein Golestanian ◽  
Farshid Aghadavoudi
Keyword(s):  
Mechanical Properties ◽  
Ultimate Strength ◽  
Multiscale Modeling ◽  
Filler Content ◽  
Hybrid Nanocomposites ◽  
Dynamics Simulation ◽  
Strength Increase ◽  
Two Phase ◽  
Macro Scale ◽  
Elongation To Failure

Abstract In this paper, the effects of filler content and the use of hybrid nanofillers on agglomeration and nanocomposite mechanical properties such as elastic moduli, ultimate strength and elongation to failure are investigated experimentally. In addition, thermoset epoxy-based two-phase and hybrid nanocomposites are simulated using multiscale modeling techniques. First, molecular dynamics simulation is carried out at nanoscale considering the interphase. Next, finite element method and micromechanical modeling are used for micro and macro scale modeling of nanocomposites. Nanocomposite samples containing carbon nanotubes, graphene nanoplatelets, and hybrid nanofillers with different filler contents are prepared and are tested. Also, field emission scanning electron microscopy is used to take micrographs from samples’ fracture surfaces. The results indicate that in two-phase nanocomposites, elastic modulus and ultimate strength increase while nanocomposite elongation to failure decreases with reinforcement weight fraction. In addition, nanofiller agglomeration occurred at high nanofiller contents especially higher than 0.75 wt% in the two-phase nanocomposites. Nanofiller agglomeration was observed to be much lower in the hybrid nanocomposite samples. Therefore, using hybrid nanofillers delays/prevents agglomeration and improves mechanical properties of nanocomposite at the same total filler content.

Microstructure and Mechanical Properties of Multi-Scale Titanium Diboride Matrix Nanocomposite Ceramic Tool Materials

2010 ◽  
Vol 431-432 ◽  
pp. 523-526
Author(s):  
Han Lian Liu ◽  
Chuan Zhen Huang ◽  
Shou Rong Xiao ◽  
Hui Wang ◽  
Ming Hong
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Flexural Strength ◽  
Transgranular Fracture ◽  
Ceramic Tool ◽  
Tool Materials ◽  
Micro Scale ◽  
Multi Scale ◽  
Nano Scale ◽  
Matrix Nanocomposite

Under the liquid-phase hot-pressing technique, the multi-scale titanium diboride matrix nanocomposite ceramic tool materials were fabricated by adding both micro-scale and nano-scale TiN particles into TiB2 with Ni and Mo as sintering aids. The effect of content of nano-scale TiN and sintering temperature on the microstructure and mechanical properties was studied. The result showed that flexural strength and fracture toughness of the composites increased first, and then decreased with an increase of the content of nano-scale TiN, while the Vickers hardness decreased with an increase of the content of nano-scale TiN. The optimal mechanical properties were flexural strength 742 MPa, fracture toughness 6.5 MPa•m1/2 and Vickers hardness 17GPa respectively. The intergranular and transgranular fracture mode were observed in the composites. The metal phase can cause ductility toughening and crack bridging, while crack deflection and transgranular fracture mode could be brought by micro-scale TiN and nano-scale TiN respectively.

Microstructure Evolution and Deformation Mechanisms of Harmonic Structure Designed Materials

2016 ◽  
Vol 879 ◽  
pp. 145-150
Author(s):  
Kei Ameyama ◽  
Sanjay Kumar Vajpai ◽  
Mie Ota
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Powder Metallurgy ◽  
Early Stage ◽  
High Strength ◽  
Plastic Instability ◽  
Structure Design ◽  
Harmonic Structure ◽  
Homogeneous Microstructure ◽  
Macro Scale

This paper presents the novel microstructure design, called Harmonic Structure, which gives structural metallic materials outstanding mechanical properties through an innovative powder metallurgy process. Homogeneous and ultra-fine grain (UFG) structure enables the materials high strength. However, such a “Homo-“ and “UFG” microstructure does not, usually, satisfy the need to be both strong and ductile, due to the plastic instability in the early stage of the deformation. As opposed to such a “Homo-and UFG“ microstructure, “Harmonic Structure” has a heterogeneous microstructure consisting of bimodal grain size together with a controlled and specific topological distribution of fine and coarse grains. In other words, the harmonic structure is heterogeneous on micro-but homogeneous on macro-scales. In the present work, the harmonic structure design has been applied to pure metals and alloys via a powder metallurgy route consisting of controlled severe plastic deformation of the corresponding powders by mechanical milling or high pressure gas milling, and subsequent consolidation by SPS. At a macro-scale, the harmonic structure materials exhibited superior combination of strength and ductility as compared to their homogeneous microstructure counterparts. This behavior was essentially related to the ability of the harmonic structure to promote the uniform distribution of strain during plastic deformation, leading to improved mechanical properties by avoiding or delaying localized plastic instability.

Sign in / Sign up

Export Citation Format

Share Document