Application of Vibrating Fluidized Bed in Low Rank Coal Drying Process

2013 ◽  
Vol 788 ◽  
pp. 233-236
Author(s):  
Yong Jie Zhao ◽  
Xiang Wei Kong ◽  
Bin Li ◽  
Zi Cheng Zhang

Low rank coal is an important energy resource in the world, particularly in the developing countries. But its high water content causes a waste of energy and serious environmental pollution, which restricts its applications. In order to improve the efficiency of the low rank coal and reduce pollution, the drying processes for low rank coal are urgently needed. This paper presented a review of the general drying processes for low rank coal. In the review, the newly-developed vibrating fluidized bed (VFB) drying process was emphasized. This novel VFB drying process which can be used in large-scale industrial production has several advantages, such as high speed, high drying intensity and low pollution. Moreover, two VFB researches reported by the authors were also introduced. In these researches, the dynamic behavior of VFB was simulated by two commercial codes of ADAMS and ANSYS separately. According to the simulation results, the exciting force and the structure of sieve box were optimized.

2013 ◽  
Vol 33 (4) ◽  
pp. 149-158
Author(s):  
Dong Hyuk Chun ◽  
Nam Sun Nho ◽  
Sang Do Kim ◽  
Young Joon Rhim ◽  
Ho Kyung Choi ◽  
...  

2021 ◽  
Author(s):  
Jingyu Jiang ◽  
Ke Zhao ◽  
Yuanping Cheng ◽  
Shaojie Zheng ◽  
Shuo Zhang ◽  
...  

Abstract To study the effect of magma intrusion on the thermal evolution of low-rank coal with high water content, the mathematical relationship between water content variation and thermal conductivity of low-rank coal was analyzed by COMSOL Multiphysics numerical simulation and field validation. Taking Daxing Mine in Tiefa coalfield as the research background, the effects of magma finite time intrusion mechanism and water volatilization in coal on thermal evolution and organic maturity of coal seam are investigated in this paper. The results show that as the sill thickness increases, the thermal evolution temperature of the coal seam increases, the required thermal evolution time increases and the final retention temperature increases after the coal seam is cooled down. Approaching the magma, the maximum temperature that the coal seam can reach increases, the maximum temperature lasts longer, and the final temperature retained by the coal seam becomes higher. The increase of water content of coal makes the thermal conductivity increase, and the rate of heat transfer from coal seam is accelerated, and more heat is transferred to distant places in the same time. At the same time, the heat lost by the magma in the same time increases, the time required for the cooling of the magma decreases, and the maximum temperature reached by the underlying coal seam is significantly lower. The presence of moisture weakens the thermal evolution of the magma to the coal seam and reduces the expected maturity of the coal. The results of average random vitrinite reflectance (Ro) and moisture examination of coal samples collected at the Daxing Mine site verified the numerical simulation results of magma thermal evolution.


2015 ◽  
Vol 30 ◽  
pp. 173-179 ◽  
Author(s):  
Ziyang Lou ◽  
Bernd Bilitewski ◽  
Nanwen Zhu ◽  
Xiaoli Chai ◽  
Bing Li ◽  
...  

Author(s):  
MD Habib ◽  
Bashir Khoda

Abstract The extrusion based three-dimensional (3D) bio-printing deposits cell-laden bio-ink with high spatial resolution and may offer living tissue regeneration. Due to the biocompatibility, very low cytotoxicity, and high-water content, natural hydrogels are commonly considered as the cell-laden bio-ink for scaffold fabrication. However, due to the low mechanical integrity, a large-scale scaffold (> 10 layers) with intricate architecture is a challenge. In this paper, we developed and characterize a novel bio-ink consisting of alginate, CMC, and TO-NFC for bio-printing applications. The potential of cellulose derivatives in terms of rheological property to satisfy scaffold architecture and cell viability is explored with a relatively small amount of solid content (<5%). By combining alginate, CMC, and TO-NFC as a hybrid hydrogel, we design to overcome their individual challenges as bio-ink. At the design stage, we have considered two main characteristics, printability and shape fidelity with quantitative indices. We studied the rheological characteristics for determining the suitable composition for extrusion bio-printing. Our investigation suggests an optimal material composition that can print 42 layers and a 9 mm tall scaffold structure. The proposed hybrid hydrogel is used to prepare bio-ink encapsulating cells and cell viability is measured as 90% after 10 days of incubation.


Particuology ◽  
2015 ◽  
Vol 23 ◽  
pp. 100-108 ◽  
Author(s):  
Jingfeng He ◽  
Yuemin Zhao ◽  
Jie Zhao ◽  
Zhenfu Luo ◽  
Chenlong Duan ◽  
...  

2012 ◽  
Vol 104 ◽  
pp. 16-22 ◽  
Author(s):  
Muhammad Aziz ◽  
Yasuki Kansha ◽  
Akira Kishimoto ◽  
Yui Kotani ◽  
Yuping Liu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document