A Study on Electrospun Nanofibrous Mats for Local Antibiotic Delivery

2013 ◽  
Vol 829 ◽  
pp. 510-514 ◽  
Author(s):  
Mahboubeh Maleki ◽  
Mohammad Amani-Tehran ◽  
Masoud Latifi ◽  
Sanjay Mathur
Keyword(s):  
Structural Characteristics ◽  
Electrospun Nanofibers ◽  
Electrospinning Process ◽  
Static System ◽  
Antibiotic Drug ◽  
Paper Fabrication ◽  
Antibiotic Release ◽  
Reduced Toxicity ◽  
Local Antibiotic ◽  
Antibiotic Delivery

The demand for novel antibiotic-loaded electrospun nanofibrous structures has increased extremely in the recent years and has engaged the interests of scientists and engineers into a blend configuration of antibiotic drug and biocompatible polymers due to their unique applications in future of better therapeutic effect, reduced toxicity and sustained local antibiotic release over a period of time. One method to produce these antibiotic-loaded networks is by electrospinning process. However, it is very important to know structural characteristics and morphology of nanofibers for controlling the performance of the yields. In this paper, fabrication of electrospun nanofibers suited for antibiotic delivery system is investigated based on tetracycline hydrochloride as the antibiotic drug and poly (lactic-co-glycolic acid) as the biodegradable polymeric matrix. Furthermore, the effect of material and process parameters on morphology and release behavior of produced nonwovens is investigated. The efficacy of the medicated scaffolds using a static system for bacterial growth on agar plates was also proved.

scholarly journals Evaluation of a bone filler scaffold for local antibiotic delivery to prevent Staphylococcus aureus infection in a contaminated bone defect

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Karen E. Beenken ◽  
Mara J. Campbell ◽  
Aura M. Ramirez ◽  
Karrar Alghazali ◽  
Christopher M. Walker ◽  
...  
Keyword(s):  
Staphylococcus Aureus ◽  
Bone Defect ◽  
Rabbit Model ◽  
In Vivo Studies ◽  
Bovine Bone ◽  
Bone Filler ◽  
Antibiotic Release ◽  
Local Antibiotic ◽  
Antibiotic Delivery

AbstractWe previously reported the development of an osteogenic bone filler scaffold consisting of degradable polyurethane, hydroxyapatite, and decellularized bovine bone particles. The current study was aimed at evaluating the use of this scaffold as a means of local antibiotic delivery to prevent infection in a bone defect contaminated with Staphylococcus aureus. We evaluated two scaffold formulations with the same component ratios but differing overall porosity and surface area. Studies with vancomycin, daptomycin, and gentamicin confirmed that antibiotic uptake was concentration dependent and that increased porosity correlated with increased uptake and prolonged antibiotic release. We also demonstrate that vancomycin can be passively loaded into either formulation in sufficient concentration to prevent infection in a rabbit model of a contaminated segmental bone defect. Moreover, even in those few cases in which complete eradication was not achieved, the number of viable bacteria in the bone was significantly reduced by treatment and there was no radiographic evidence of osteomyelitis. Radiographs and microcomputed tomography (µCT) analysis from the in vivo studies also suggested that the addition of vancomycin did not have any significant effect on the scaffold itself. These results demonstrate the potential utility of our bone regeneration scaffold for local antibiotic delivery to prevent infection in contaminated bone defects.

Heparin-mediated antibiotic delivery from an electrochemically-aligned collagen sheet

2021 ◽  
pp. 1-12
Author(s):  
Olivia T. Cheng ◽  
Andrew P. Stein ◽  
Eric Babajanian ◽  
Kathryn R. Hoppe ◽  
Shawn Li ◽  
...  
Keyword(s):  
High Performance ◽  
Inhibitory Concentration ◽  
Medical Implants ◽  
Implantable Medical Devices ◽  
Antibiotic Solution ◽  
Inhibition Zones ◽  
Antibiotic Release ◽  
Local Antibiotic ◽  
Antibiotic Delivery

BACKGROUND: Implantable medical devices and hardware are prolific in medicine, but hardware associated infections remain a major issue. OBJECTIVE: To develop and evaluate a novel, biologic antimicrobial coating for medical implants. METHODS: Electrochemically compacted collagen sheets with and without crosslinked heparin were synthesized per protocol developed by our group. Sheets were incubated in antibiotic solution (gentamicin or moxifloxacin) overnight, and in vitro activity was assessed with five-day diffusion assays against Pseudomonas aeruginosa. Antibiotic release overtime from gentamicin infused sheets was determined using in vitro elution and high performance liquid chromatography (HPLC). RESULTS: Collagen-heparin-antibiotic sheets demonstrated larger growth inhibition zones against P. aeruginosa compared to collagen-antibiotic alone sheets. This activity persisted for five days and was not impacted by rinsing sheets prior to evaluation. Rinsed collagen-antibiotic sheets did not show any inhibition zones. Elution of gentamicin from collagen-heparin-gentamicin sheets was slow and remained above the minimal inhibitory concentration for gentamicin sensitive organisms for 29 days. Conversely, collagen-gentamicin sheets eluted their antibiotic payload within 24 hours. Overall, heparin associated sheets demonstrated larger inhibition zones against P. aeruginosa and prolonged elution profile via HPLC. CONCLUSION: We developed a novel, local antibiotic delivery system that could be used to coat medical implants/hardware in the future and reduce post-operative infections.

scholarly journals Digital drug delivery: on–off ultrasound controlled antibiotic release from coated matrices with negligible background leaching

2014 ◽  
Vol 2 (6) ◽  
pp. 893-902 ◽  
Author(s):  
Misty L. Noble ◽  
Pierre D. Mourad ◽  
Buddy D. Ratner
Keyword(s):  
Drug Delivery ◽  
Antibiotic Release ◽  
Local Antibiotic ◽  
Antibiotic Delivery

An ultrasound-responsive pHEMA-based system is created for local antibiotic delivery to treat biofilm-related or device-centered infections.

A systematic review of local antibiotic devices used to improve wound healing following the surgical management of foot infections in diabetics

2018 ◽  
Vol 100-B (11) ◽  
pp. 1409-1415 ◽  
Author(s):  
B. A. Marson ◽  
S. R. Deshmukh ◽  
D. J. C. Grindlay ◽  
B. J. Ollivere ◽  
B. E. Scammell
Keyword(s):  
Systematic Review ◽  
Wound Healing ◽  
Surgical Management ◽  
Case Series ◽  
Diabetic Patients ◽  
Local Antibiotics ◽  
Wound Breakdown ◽  
Patients With Diabetes ◽  
Local Antibiotic ◽  
Antibiotic Delivery

Aims Local antibiotics are used in the surgical management of foot infection in diabetic patients. This systematic review analyzes the available evidence of the use of local antibiotic delivery systems as an adjunct to surgery. Materials and Methods Databases were searched to identify eligible studies and 13 were identified for inclusion. Results Overall, the quality of the studies was poor. A single trial suggested that wound healing is quicker when a gentamicin-impregnated collagen sponge was implanted at time of surgery, with no difference in length of stay or rate of amputation. Results from studies with high risk of bias indicated no change in wound healing when a gentamicin-impregnated sponge was implanted during transmetatarsal amputation, but a reduction in the incidence of wound breakdown (8% vs 25%, not statistically significant) was identified. A significant cost reduction was identified when using an antimicrobial gel to deliver antibiotics and anti-biofilm agents (quorum-sensing inhibitors) compared with routine dressings and systemic antibiotics. Analyses of case series identified 485 patients who were treated using local antibiotic delivery devices. The rates of wound healing, re-operation, and mortality were comparable to those that have been previously reported for the routine management of these infections. Conclusion There is a lack of good-quality evidence to support the use of local antibiotic delivery devices in the treatment of foot infections in patients with diabetes. Cite this article: Bone Joint J 2018;100-B:1409–15.

Structural Characteristics and Piezoelectric Properties of Electrospun Piezoelectric nanofibers

2005 ◽  
Vol 888 ◽  
Author(s):  
Yong Shi ◽  
Shiyou Xu ◽  
Sang-Gook Kim ◽  
Matthew Libera
Keyword(s):  
Piezoelectric Properties ◽  
Perovskite Phase ◽  
Structural Characteristics ◽  
Sol Gel ◽  
Electrospinning Process ◽  
Hysteresis Curve ◽  
Micro Fabrication ◽  
Pure Perovskite Phase ◽  
Promising Application

ABSTRACTThis paper reports the development and characterization of PZT nanofibers with average diameters ranged from 50 to 150 nm for various sensing and actuation applications. PZT nano fibers have been developed by sol-gel electrospinning process. Both randomly distributed and uniaxially aligned PZT fibers were obtained from the sol-gel solution with viscosity modified by polyvinyl pyrrolidone (PVP). The diameters of the nano fibers can be further reduced or controlled for different applications. The morphology and structure of the nanofibers were examined with SEM, TEM and XRD. We used two-step process to anneal the electrospun fibers and XRD confirmed that pure perovskite phase was formed after the as-spun fibers being annealed at about 650°C. TEM results showed that the grain size of the fibers was about 10 nm. Microelectromechanical (MEMS) based micro-fabrication technologies were used to assist the development of the nano-fibers in designing the test samples, depositing and patterning the electrodes, and also testing the performance of the nano fibers. Different approaches have been explored to fabricate the uniaxially aligned nano fibers. SEM results showed that partial aligned PZT nano-fibers were obtained on the pre-patterned substrats. Interdigitated Electrodes were evaporated on the partial aligned fibers by using shadow mask. Hysteresis curve of the nano piezoelectric fibers was also obtained, however further tests are still needed to get accurate measurement. The obtained PZT nanofibers have promising application potentials in designing and enabling micro and nano devices.

scholarly journals Characterization and Antibiofilm Activity of Mannitol–Chitosan-Blended Paste for Local Antibiotic Delivery System

Marine Drugs ◽  
2019 ◽  
Vol 17 (9) ◽  
pp. 517 ◽  
Author(s):  
Leslie R. Pace ◽  
Zoe L. Harrison ◽  
Madison N. Brown ◽  
Warren O. Haggard ◽  
J. Amber Jennings
Keyword(s):  
Infection Prevention ◽  
Bacterial Biofilm ◽  
Antibiofilm Activity ◽  
Persister Cells ◽  
In Vivo Evaluation ◽  
Musculoskeletal Infection ◽  
Prevention And Treatment ◽  
Local Antibiotic ◽  
Antibiotic Delivery

Mannitol, a polyalcohol bacterial metabolite, has been shown to activate dormant persister cells within bacterial biofilm. This study sought to evaluate an injectable blend of mannitol, chitosan, and polyethylene glycol for delivery of antibiotics and mannitol for eradication of Staphylococcal biofilm. Mannitol blends were injectable and had decreased dissociation and degradation in the enzyme lysozyme compared to blends without mannitol. Vancomycin and amikacin eluted in a burst response, with active concentrations extended to seven days compared to five days for blends without mannitol. Mannitol eluted from the paste in a burst the first day and continued through Day 4. Eluates from the mannitol pastes with and without antibiotics decreased viability of established S. aureus biofilm by up to 95.5% compared to blends without mannitol, which only decreased biofilm when loaded with antibiotics. Cytocompatibility tests indicated no adverse effects on viability of fibroblasts. In vivo evaluation of inflammatory response revealed mannitol blends scored within the 2–4 range at Week 1 (2.6 ± 1.1) and at Week 4 (3.0 ± 0.8), indicative of moderate inflammation and comparable to non-mannitol pastes (p = 0.065). Clinically, this paste could be loaded with clinician-selected antibiotics and used as an adjunctive therapy for musculoskeletal infection prevention and treatment.

scholarly journals Energy-Saving Electrospinning with a Concentric Teflon-Core Rod Spinneret to Create Medicated Nanofibers

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2421 ◽  
Author(s):  
Shixiong Kang ◽  
Shicong Hou ◽  
Xunwei Chen ◽  
Deng-Guang Yu ◽  
Lin Wang ◽  
...  
Keyword(s):  
Energy Saving ◽  
Energy Savings ◽  
Ex Vivo ◽  
Low Cost ◽  
Electrospun Nanofibers ◽  
Electrospinning Process ◽  
Water Soluble ◽  
Drug Dissolution ◽  
Core Rod

Although electrospun nanofibers are expanding their potential commercial applications in various fields, the issue of energy savings, which are important for cost reduction and technological feasibility, has received little attention to date. In this study, a concentric spinneret with a solid Teflon-core rod was developed to implement an energy-saving electrospinning process. Ketoprofen and polyvinylpyrrolidone (PVP) were used as a model of a poorly water-soluble drug and a filament-forming matrix, respectively, to obtain nanofibrous films via traditional tube-based electrospinning and the proposed solid rod-based electrospinning method. The functional performances of the films were compared through in vitro drug dissolution experiments and ex vivo sublingual drug permeation tests. Results demonstrated that both types of nanofibrous films do not significantly differ in terms of medical applications. However, the new process required only 53.9% of the energy consumed by the traditional method. This achievement was realized by the introduction of several engineering improvements based on applied surface modifications, such as a less energy dispersive air-epoxy resin surface of the spinneret, a free liquid guiding without backward capillary force of the Teflon-core rod, and a smaller fluid–Teflon adhesive force. Other non-conductive materials could be explored to develop new spinnerets offering good engineering control and energy savings to obtain low-cost electrospun polymeric nanofibers.

scholarly journals A novel technique for fabricating antibiotic-coated intramedullary nails using an antibiotic-loaded calcium sulphate hydroxyapatite bio-composite, Cerament-V

2019 ◽  
Vol 2019 (11) ◽  
Author(s):  
Anoop Anugraha ◽  
Luke D Hughes ◽  
Anand Pillai
Keyword(s):  
Deformity Correction ◽  
Calcium Sulphate ◽  
Stable Fixation ◽  
Intramedullary Nails ◽  
Novel Technique ◽  
Systemic Antibiotic Therapy ◽  
Antibiotic Release ◽  
Local Antibiotic ◽  
As Toxicity ◽  
Toxicity Effects

Abstract Deformity correction in the setting of osteomyelitis is a challenge for any orthopaedic surgeon. Principles of management are well described and include staged debridement, stable fixation and a combination of local and systemic antibiotic therapy. An antibiotic-coated nail (ACN) can prove a useful tool—stabilizing bone, whilst allowing for local antibiotic elution. Typically, the surgeon will prepare these implants in the operating room using materials that are routinely at hand. Most frequently, this will involve the use of antibiotic-loaded poly-methyl methacrylate (PMMA). This method of ACN fabrication has several disadvantages. PMMA is non-degradable and can be difficult to remove surgically. There are limitations with regard to antibiotic suitability, antibiotic release as well as toxicity effects. In this case report, we present a novel technique for the preparation of ACNs for use in hindfoot surgery, using a calcium sulphate/hydroxyapatite-based bio-composite—Cerament-V.

scholarly journals Nanostructured Fibers Containing Natural or Synthetic Bioactive Compounds in Wound Dressing Applications

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2407 ◽  
Author(s):  
Alexa-Maria Croitoru ◽  
Denisa Ficai ◽  
Anton Ficai ◽  
Natalia Mihailescu ◽  
Ecaterina Andronescu ◽  
...  
Keyword(s):  
Wound Healing ◽  
Healing Process ◽  
Electrospun Nanofibers ◽  
Natural Compounds ◽  
Electrospinning Process ◽  
Wound Dressings ◽  
Wound Healing Process ◽  
Skin Substitutes ◽  
Bioactive Constituents ◽  
Electrospinning Method

The interest in wound healing characteristics of bioactive constituents and therapeutic agents, especially natural compounds, is increasing because of their therapeutic properties, cost-effectiveness, and few adverse effects. Lately, nanocarriers as a drug delivery system have been actively investigated and applied in medical and therapeutic applications. In recent decades, researchers have investigated the incorporation of natural or synthetic substances into novel bioactive electrospun nanofibrous architectures produced by the electrospinning method for skin substitutes. Therefore, the development of nanotechnology in the area of dressings that could provide higher performance and a synergistic effect for wound healing is needed. Natural compounds with antimicrobial, antibacterial, and anti-inflammatory activity in combination with nanostructured fibers represent a future approach due to the increased wound healing process and regeneration of the lost tissue. This paper presents different approaches in producing electrospun nanofibers, highlighting the electrospinning process used in fabricating innovative wound dressings that are able to release natural and/or synthetic substances in a controlled way, thus enhancing the healing process.

Sign in / Sign up

Export Citation Format

Share Document