Research on the Numerical Simulation of Hot Stamping for High Strength Steel

2014 ◽  
Vol 898 ◽  
pp. 136-139
Author(s):  
Chang Feng Men ◽  
Wen Wen Du ◽  
Cui Hong Han
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
High Strength Steel ◽  
Hot Stamping ◽  
High Strength ◽  
Nonlinear Finite Element ◽  
Weight Percentage ◽  
Finite Element Software ◽  
Simulation Results ◽  
Die Temperature

In order to research on the hot stamping property of high strength steel, the stamping forming of USIBOR1500P is simulated by the nonlinear finite element software Dynaform and Ansys/ls-dyna. The initial data simulated on USIBOR1500P is obtained by the hot tensile test. The simulation results show that the martensite weight percentage and Vickers hardness are in inverse proportion to stamping speed and initial die temperature.

Research on the Effects of Hot Stamping Process Parameters on Mechanical Property for U-Shape Part

2016 ◽  
Vol 693 ◽  
pp. 863-871 ◽  
Author(s):  
Liang Xu ◽  
Gang Zhao ◽  
Lu Pan ◽  
Wen Wen Du
Keyword(s):  
Maximum Stress ◽  
Hot Stamping ◽  
High Strength ◽  
Nonlinear Finite Element ◽  
Maximum Temperature ◽  
Weight Percentage ◽  
Finite Element Software ◽  
Punch Radius ◽  
Simulation Results ◽  
Minimum Stress

For the sake of research on the hot stamping property of high strength steel, the stamping forming of USIBOR1500P is simulated by the nonlinear finite element software Dynaform and Ansys/ls-dyna. The initial data simulated on USIBOR1500P is obtained by the hot tensile test. The simulation results show that the martensite weight percentage and Vickers hardness are in inverse proportion to stamping speed and initial die temperature. Otherwise, they are increased when the heat conduction coefficient is rising. Thus they affect the final properties of machinery of U-shape part. The maximum stress appears in the die and punch radius, and the minimum stress appears in the flange and the bottom of the blank. The minimum temperature value appears in the flange and the maximum temperature value appears in the die and punch radius.

scholarly journals Thermomechanical-Phase Transformation Simulation of High-Strength Steel in Hot Stamping

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Wenhua Wu ◽  
Ping Hu ◽  
Guozhe Shen
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Phase Transformation ◽  
High Strength Steel ◽  
Hot Stamping ◽  
Constitutive Models ◽  
High Strength ◽  
Simulation Software ◽  
Transmission Model ◽  
Stamping Process

The thermomechanical-phase transformation coupled relationship of high-strength steel has important significance in forming the mechanism and numerical simulation of hot stamping. In this study a new numerical simulation module of hot stamping is proposed, which considers thermomechanical-transformation multifield coupled nonlinear and large deformation analysis. In terms of the general shell finite element and 3D tetrahedral finite element analysis methods related to temperature, a coupled heat transmission model for contact interfaces between blank and tools is proposed. Meanwhile, during the hot stamping process, the phase transformation latent heat is introduced into the analysis of temperature field. Next the thermomechanical-transformation coupled constitutive models of the hot stamping are considered. Static explicit finite element formulae are adopted and implemented to perform the full numerical simulations of the hot stamping process. The hot stamping process of typical U-shaped and B-pillar steel is simulated using the KMAS software, and a strong agreement comparison between temperature, equivalent stress, and fraction of martensite simulation and experimental results indicates the validity and efficiency of the hot stamping multifield coupled constitutive models and numerical simulation software KMAS. The temperature simulated results also provide the basic guide for the optimization designs of cooling channels in tools.

Simulation of Tensile Test of the 1/2Y Welded Joint Made of Ultra High Strength Steel

2012 ◽  
Vol 726 ◽  
pp. 110-117 ◽  
Author(s):  
Jarosław Galkiewicz
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Detailed Analysis ◽  
High Strength Steel ◽  
Welded Joint ◽  
Constitutive Relations ◽  
High Strength ◽  
Ultra High Strength Steel ◽  
Simulation Results

The detailed analysis of the tensile properties of the 1/2Y welded joint made of ultra-high strength steel S 960 QC was carried out. The analysis concerned various parts of welded joint and has been carried out with the help of both experiment and numerical simulation. Results were compared with the data measured using the ARAMIS system. The purpose of the analysis was to provide the constitutive relations for detailed analysis of the welded joint by finite element method.

Behaviors of Polyurethane Filled Double Skin Steel Tubular Members

2011 ◽  
Vol 94-96 ◽  
pp. 196-200
Author(s):  
Zhen Yuan Hang ◽  
Xu Feng Mi
Keyword(s):  
Mechanical Properties ◽  
Numerical Simulation ◽  
Finite Element ◽  
Axial Compression ◽  
Theoretical Basis ◽  
Nonlinear Finite Element ◽  
Work Processes ◽  
Finite Element Software ◽  
Double Skin ◽  
Simulation Results

Based on the nonlinear finite element software, the mechanical properties of polyurethane filled double skin steel tubular (PFDSST) members with different hoop coefficients and slenderness ratios under axial compression have been studied by nonlinear finite element software. On the basis of the researches on the numerical simulation results, it was summarized that the influences on stability, ductility and properties of the PFDSST members under axial compression, and then the work processes of the PFDSST members have been revealed deeply, the theoretical basis for the designs of the PFDSST members was established.

Numerical Simulation of the Kinetic Energy Projectile Oblique Penetration into the Concrete

2014 ◽  
Vol 989-994 ◽  
pp. 982-985
Author(s):  
Jun Chen ◽  
Xiao Jun Ye
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Kinetic Energy ◽  
Three Dimensional ◽  
Test Results ◽  
Destruction Process ◽  
3D Finite Element ◽  
Finite Element Software ◽  
Simulation Results ◽  
Target Characteristics

ANSYS-LS/DYNA 3D finite element software projectile penetrating concrete target three-dimensional numerical simulation , has been the target characteristics and destroy ballistic missile trajectory , velocity and acceleration and analyze penetration and the time between relationship , compared with the test results , the phenomenon is consistent with the simulation results. The results show that : the destruction process finite element software can better demonstrate concrete tests revealed the phenomenon can not be observed , estimated penetration depth and direction of the oblique penetration missile deflection .

GPU Accelerated Finite Element Simulation for Ultra-High Strength Steel Quenching

2013 ◽  
Vol 842 ◽  
pp. 337-340
Author(s):  
Chao Wang ◽  
Bin Zhu ◽  
Liang Wang ◽  
Yi Lin Wang ◽  
Yi Sheng Zhang
Keyword(s):  
Finite Element ◽  
Latent Heat ◽  
High Strength Steel ◽  
Thermal Contact ◽  
Hot Stamping ◽  
High Strength ◽  
Heat Processing ◽  
Processing Unit ◽  
Ultra High Strength Steel ◽  
Quenching Process

During the hot stamping of ultra-high strength steel (UHSS), the quenching effect of the mold on the sheet plays an important role to achieve the transition from austenite to martensite. Thus a finite element model for the quenching process of UHSS is established in this paper. The key points of the model include contact thermal conduction and the latent heat processing of phase transforming. Finite element program has been developed to calculate the temperature field of the UHSS quenching process, and temperature measurement device was used to get the temperature-time curve of the mold and the sheet to validate the calculation results. It can be concluded that the latent heat and thermal contact resistance have a critical influence on the temperature filed of the sheet during the hot stamping process. Finally, the parallel computation technology based on GPU(Graphics processing unit) was adopted to accelerate the calculation.

Numerical Simulation and Experimental Research on Multi-Position Progressive Stamping Process of Automotive Structural Part

2012 ◽  
Vol 271-272 ◽  
pp. 1366-1371
Author(s):  
Qin Xiang Xia ◽  
Teng Xu ◽  
Guang Ming Wei ◽  
Fu Yuan Ye
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Experimental Research ◽  
High Strength ◽  
Component Part ◽  
Progressive Die ◽  
Structural Part ◽  
Fea Simulation ◽  
Finite Element Numerical Simulation ◽  
Simulation Results

Multi-position progressive stamping is widely used in industrial fields, such as electronic, automobile and appliance, etc. Finite element numerical simulation has been an effective method to analyze the deformation of multi-position progressive stamping, the progressive die with 13 positions for the high strength steel automotive soleplate component part was manufactured based on the FEA simulation results obtained by multi-position multi-operation modeling method, and the corresponding progressive stamping experiments were carried out. The experimental results of the forward deep drawing of position 3 were further compared with the simulation ones, the results conform well to each other.

Prediction of Collapse Area of Construction Materials for Cooling Tower with Different Cut Height Due to the Blasting Demolition

2016 ◽  
Vol 723 ◽  
pp. 801-806
Author(s):  
Tie Jun Tao ◽  
Lian Sheng Liu ◽  
En An Chi ◽  
Ming Sheng Zhao
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Cooling Tower ◽  
Construction Materials ◽  
Ground Vibration ◽  
Parallel Study ◽  
Finite Element Software ◽  
Dynamic Finite Element ◽  
Simulation Results

The effect of cut height on collapse area is simulated and analyzed by dynamic finite element software. Meanwhile, the simulated collapse processes of the cooling tower with different cut height were completed in a parallel study, the results of which are briefly introduced in this paper. The results show that: as the cut height increases, ground vibration on surrounding structures and collapse area of cooling tower decreases. At last, numerical simulation results were used in blasting project, which reduced hazard of collapse vibration and verify the scientific of this method.

Research on Hot Stamping of Square Cup for Advanced High Strength Steel by Numerical Simulation

2012 ◽  
Vol 9 (9) ◽  
pp. 1165-1170
Author(s):  
Chengxi Lei ◽  
Junjia Cui ◽  
Zhongwen Xing ◽  
Hongya Fu ◽  
Hongsheng Liu
Keyword(s):  
Numerical Simulation ◽  
High Strength Steel ◽  
Hot Stamping ◽  
High Strength ◽  
Advanced High Strength Steel
Sign in / Sign up

Export Citation Format

Share Document