Experimental Studies on a Solar Low Temperature Multi-Effect Distillation Desalination System

2014 ◽  
Vol 953-954 ◽  
pp. 20-23
Author(s):  
Dong Dong Feng ◽  
Xiao Bin Pei ◽  
Feng Ming Zhang ◽  
Yun Mo Zhao ◽  
Wei Yang ◽  
...  

Solar energy has been widely used in desalination systems. A low-temperature multi-effect desalination system driven by solar is constructed for a series of experimental studies. The results show that water production rate grows with solar radiation, and maintains at a high level between 12am to 4pm. The optimized heat water flow is 1400 kg/h and appropriate cooling water temperature is 24 °C, respectively.

2018 ◽  
Vol 7 (4.19) ◽  
pp. 818
Author(s):  
Kadhim K. Idan Al-Chlaihawi ◽  
Dhafer A. Hamzah ◽  
Ahmed K. Zarzoor ◽  
Yousif M. Hasan

Promoting reduction of PV temperature plays crucial role in increasing electrical performance. The present work deal with different types of absorber shape for analysing heat transfer phenomena. Serpentine and spiral absorber are using to verify this purpose with different boundary conditions of inlet mass flow rate and inlet temperatures.The recent study was conducted to evaluate the effect of some operating and designing parameters such as solar radiation levels, flow rates, absorber shape and cooling water temperature on the performance of PVT system numerically. Performance of PVT system determined by thermal efficiency, electrical efficiency and the summation of both known as total or PVT efficiency. Solar radiation ranging from 500 W/m2 to1000 W/m2 was introduced and at each, flow rates of water ranging from 0.016 kg/s to 0.05 kg/s. The results show that the performance of PVT increases with a flow rate at all radiation levels. Also the spiral flow absorber gives a higher performance than serpentine absorber where the value of  of spiral absorber is increased by about 5.2% compared to the value of serpentine absorber, on the other hand, the rate of heat loss ( decreased by about 10%.Increasing initial cooling water temperature degrades electrical efficiency of PVT system.  


2021 ◽  
Vol 299 ◽  
pp. 03005
Author(s):  
Hongyu Ge ◽  
Yisong Cai ◽  
Sitong Li ◽  
Kaimin Wang ◽  
Xiaohua Liu

HDH seawater desalination technology has characteristics of flexible scale, small investment, and suitable for decentralized fresh water demand. This paper designs a HDH seawater desalination system, and based on the principles of energy conservation and mass conservation, a theoretical calculation model is established, and the influence of spray liquid flow and temperature, airflow, cooling water temperature and flow on the system water production and Gained output ration (GOR) is studied. And the orthogonal analysis method is used to study the influence of different parameters on water production and GOR. The results show that: water production and GOR are positively related to temperature of the spray liquid, when spray liquid or air flow is large, fresh water output is negatively correlated with air flow, system water production and cooling water flow are positively correlated at first, then system fresh water production tends to be stable, GOR and cooling water flow are first negatively correlated, and then GOR become stable, water production is negatively correlated with cooling water temperature, GOR is positively correlated with cooling water temperature. The spray liquid flow rate has the greatest influence on water production, and spray liquid temperature has the greatest influence on GOR.


2017 ◽  
Author(s):  
Jianyong Wang ◽  
Yunho Hwang ◽  
Jiangfeng Wang ◽  
Yiping Dai

Low-temperature Kalina cycle power generation system shows great potential in the region of solar energy utilization. The variation in solar radiation affects the heat source temperature of Kalina cycle, and additionally the cooling water temperature also varies with the seasons. In this paper, the mathematical model of a Kalina cycle used for low-temperature solar power generation is established to investigate the off-design performance of the Kalina cycle under off-design heat source and cooling water temperature using three control strategies including constant pressure regulation method, sliding pressure regulation method and modified sliding pressure regulation method. The results show that when the heat source temperature varies, the modified sliding pressure regulation method could keep the cycle performance and the efficiencies of turbine and pump at a relatively high value, and it could be applied in a wider range of heat source temperature. When the cooling water temperature varies, different control strategies have similar influence on the variations of the cycle performance and the efficiencies of turbine and pump. Based on performance comparison, the modified sliding pressure regulation method is determined to be the optimum control strategy for the Kalina cycle under off-design conditions.


2021 ◽  
Vol 13 (11) ◽  
pp. 5957
Author(s):  
Tomas Mauder ◽  
Michal Brezina

Production of overall CO2 emissions has exhibited a significant reduction in almost every industry in the last decades. The steelmaking industry is still one of the most significant producers of CO2 emissions worldwide. The processes and facilities used at steel plants, such as the blast furnace and the electric arc furnace, generate a large amount of waste heat, which can be recovered and meaningfully used. Another way to reduce CO2 emissions is to reduce the number of low-quality steel products which, due to poor final quality, need to be scrapped. Steel product quality is strongly dependent on the continuous casting process where the molten steel is converted into solid semifinished products such as slabs, blooms, or billets. It was observed that the crack formation can be affected by the water cooling temperature used for spray cooling which varies during the year. Therefore, a proper determination of the cooling water temperature can prevent the occurrence of steel defects. The main idea is based on the utilization of the waste heat inside the steel plant for preheating the cooling water used for spray cooling in the Continuous Casting (CC) process in terms of water temperature stabilization. This approach can improve the quality of steel and contribute to the reduction of greenhouse gas emissions. The results show that, in the case of billet casting, a reduction in the cooling water consumption can be also reached. The presented tools for achieving these goals are based on laboratory experiments and on advanced numerical simulations of the casting process.


Author(s):  
Jungho Lee ◽  
Cheong-Hwan Yu ◽  
Sang-Jin Park

Water spray cooling is an important technology which has been used in a variety of engineering applications for cooling of materials from high-temperature nominally up to 900°C, especially in steelmaking processes and heat treatment in hot metals. The effects of cooling water temperature on spray cooling are significant for hot steel plate cooling applications. The local heat flux measurements are introduced by a novel experimental technique in which test block assemblies with cartridge heaters and thermocouples are used to measure the heat flux distribution on the surface of hot steel plate as a function of heat flux gauge. The spray is produced from a fullcone nozzle and experiments are performed at fixed water impact density of G and fixed nozzle-to-target spacing. The results show that effects of water temperature on forced boiling heat transfer characteristics are presented for five different water temperatures between 5 to 45°C. The local heat flux curves and heat transfer coefficients are also provided to a benchmark data for the actual spray cooling of hot steel plate cooling applications.


2020 ◽  
Author(s):  
Youssef Moulane ◽  
Emmanuel Jehin ◽  
Francisco José Pozuelos ◽  
Jean Manfroid ◽  
Zouhair Benkhaldoun ◽  
...  

<p>Long Period Comets (LPCs) have orbital periods longer than 200 years, perturbed from their resting place in the Oort cloud. Such gravitational influences may send these icy bodies on a path towards the center of the Solar system in highly elliptical orbits. In this work, we present the activity and composition evolution of several LPCs observed with both TRAPPIST telescopes (TS and TN) during the period of 2019-2020. These comets include: C/2017 T2 (PANSTARRS), C/2018 Y1 (Iwamoto), C/2018 W2 (Africano), and disintegrated comet C/2019 Y4 (ATLAS). We monitored the OH, NH, CN, C<sub>2</sub> and C<sub>3</sub> production rates evolution and their chemical mixing ratios with respect to their distances to the Sun as well as the dust production rate proxy (A(0)fp) during the journey of these comets into the inner Solar system.</p> <p><strong>C/2017 T2 (PANSTARRS)</strong> is a very bright comet which was discovered on October 2, 2017 when it was 9.20 au from the Sun. We started observing this comet with TS at the beginning of August 2019 when it was at 3.70 au. The comet made the closest approach to the Earth on December 28, 2019 at a distance of 1.52 au and it passed the perihelion on May 4, 2020 at 1.61 au. The water production rate of the comet reached a maximum of (4,27±0,12)10<sup>28 </sup>molecules/s and its dust production rate (A(0)fp(RC)) also reached the peak of 5110±25 cm on January 26, 2020, when the comet was at 2.08 au from the Sun (-100 days pre-perihelion). At the time of writing, we still monitoring the activity of the comet with TN at heliocentric distance of 1.70 au. Our observations show that C/2017 T2 is a normal LPC.</p> <p><strong>C/2018 Y1 (Iwamoto)</strong> is a nearly parabolic comet with a retrograde orbit discovered on December 18, 2018 by Japanese amateur astronomer Masayuki Iwamoto. We monitored the activity and composition of Iwamoto with both TN and TS telescopes from January to March 2019. The comet reached its maximum activity on January 29, 2019 when it was at 1.29 au from the Sun (-8 days pre-perihelion) with Q(H<sub>2</sub>O)=(1,68±0,05)10<sup>28 </sup>molecules/s and A(0)fp(RC)= 92±5 cm. These measurements show that it was a dust-poor comet compared to the typical LPCs.</p> <p><strong>C/2018 W2 (Africano) </strong>was discovered on November 27, 2018 at Mount Lemmon Survey with a visual magnitude of 20. The comet reached its perihelion on September 6, 2019 when it was at 1.45 au from the Sun. We monitored the comet from July 2019 (r<sub>h</sub>=1.71 au) to January 2020 (r<sub>h</sub>=2.18 au) with both TN and TS telescopes. The comet reached its maximum activity on September 21, 15 days post-perihelion (r<sub>h</sub>=1.47 au) with Q(H<sub>2</sub>O)=(0,40±0,03)10<sup>28 </sup>molecules/s.</p> <p><strong>C/2019 Y4 (ATLAS)</strong> is a comet with a nearly parabolic orbit discovered on December 18, 2019 by the ATLAS survey. We started to follow its activity and composition with broad- and narrow-band filters with the TN telescope on February 22, 2019 when it was at 1.32 au from the Sun until May 3, 2020 when the comet was at a heliocentric distance of 0.90 au inbound. The comet activity reached a maximum on March 22 (r<sub>h</sub>=1.65 au) 70 days before perihelion. At that time, the water-production rate reached (1,53±0,04)10<sup>28 </sup>molecules/s and the A(0)fp reached (1096±14) cm in the red filter. After that, the comet began to fade and disintegrated into several fragments.</p>


Sign in / Sign up

Export Citation Format

Share Document