Life Cycle Assessment of Circular Bio-Based Construction

2022 ◽  
Author(s):  
Valeria Cascione ◽  
Matt Roberts ◽  
Stephen Allen ◽  
Barrie Dams ◽  
Daniel Maskell ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Service Life ◽  
Renewable Resources ◽  
Circular Economy ◽  
Construction Sector ◽  
Natural Materials ◽  
Use Of Resources ◽  
Sequestration Potential

The construction sector is a large consumer of non-renewable resources and it is responsible of 44% of global energy related CO2 emissions. Circular economy is an emerging strategy that has potential to make significant improvements in the construction industry, by taking efficient and sustainable actions against climate change. The principles of circular economy are to minimise the waste of resources, by maximizing materials' performances, whilst in use, and recycle and regenerate them at the end of their service life. Natural materials can potentially be suitable in this strategy, due to the use of renewable resources, carbon sequestration potential, and high suitability for reuse and recycling. The development of bio-based wall panel is a first step into the integration of a circular economy approach in the construction sector. In this study, vapour responsive bio-based panel prototypes with low thermal transmittance (U<0.20 W/m2K) are being designed, taking into consideration the burdens and benefits of natural materials over their entire life cycle. The challenge is to assess the environmental impact of the panels during their design and production, maximise performance and life span, when in use, and regenerate and recycle panel components at the end of the service life. In this paper, a life cycle assessment of a prototype bio-based panel designed with circular economy principles is investigated. The environmental impact of the panel is analysed to investigate limitation in assessing emissions and use of resources in a circular prospective. The objective of the research is to integrate environmental impact analysis during the early stage of panel design. This will put the basis for the development of a sustainable and circular building industry and for identifying area of improvements for the development of sustainable circular panels with expected hygrothermal benefits conferred using bio-based materials.

scholarly journals Methodology for the quantification of concrete sustainability

2018 ◽  
Vol 174 ◽  
pp. 01006 ◽  
Author(s):  
Břetislav Teplý ◽  
Tomáš Vymazal ◽  
Pavla Rovnaníková
Keyword(s):  
Decision Making ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Service Life ◽  
Circular Economy ◽  
Point Of View ◽  
Raw Material ◽  
Load Bearing Capacity ◽  
Sustainability Management

Efficient sustainability management requires the use of tools which allow material, technological and construction variants to be quantified, measured or compared. These tools can be used as a powerful marketing aid and as support for the transition to “circular economy”. Life Cycle Assessment (LCA) procedures are also used, aside from other approaches. LCA is a method that evaluates the life cycle of a structure from the point of view of its impact on the environment. Consideration is given also to energy and raw material costs, as well as to environmental impact throughout the life cycle - e.g. due to emissions. The paper focuses on the quantification of sustainability connected with the use of various types of concrete with regard to their resistance to degradation. Sustainability coefficients are determined using information regarding service life and "eco-costs". The aim is to propose a suitable methodology which can simplify decision-making in the design and choice of concrete mixes from a wider perspective, i.e. not only with regard to load-bearing capacity or durability.

scholarly journals Environmental Life Cycle Assessment of Rapeseed and Rapeseed Oil Produced in Northern Europe: A Latvian Case Study

2020 ◽  
Vol 12 (14) ◽  
pp. 5699 ◽  
Author(s):  
Anda Fridrihsone ◽  
Francesco Romagnoli ◽  
Ugis Cabulis
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Impact Assessment ◽  
Energy Demand ◽  
Rapeseed Oil ◽  
Mineral Fertilizers ◽  
Agricultural Practice ◽  
Cumulative Energy ◽  
Use Of Resources

There is a major international effort to improve the availability of data for life cycle assessment (LCA), as these assessments have become one of the main pillars driving European policy with respect to the sustainable use of resources. However, there is still a lack of data even for Europe. This study presents a cradle-to-farm gate assessment, or LCA, of winter and spring rapeseed produced in the northern European country of Latvia. The LCA model is based on an in-depth and up-to-date agricultural practice used in the region and covers the time span of 2008–2016. An LCA of rapeseed oil produced by cold pressing was carried out. The environmental impact assessment was calculated with the ReCiPe impact assessment method version 1.03, a hierarchical (H) perspective, along with the cumulative energy demand method v1.11. Cultivation of winter rapeseed has a lower environmental impact than cultivation of spring rapeseed due to higher agricultural inputs and higher yield. The greatest impact is on human health. Mineral fertilizers (production and application) and agricultural machinery are responsible for the greatest environmental impact. The results for the mill stage of rapeseed oil demonstrated that the choice of the allocation method has a significant impact on the environmental performance results.

scholarly journals A Life Cycle Assessment of reprocessing face masks during the Covid-19 pandemic

2021 ◽  
Author(s):  
Bart van Straten ◽  
Sharina Ligtelijn ◽  
Lieke Droog ◽  
Esther Putman ◽  
Jenny Dankelman ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Water Consumption ◽  
Circular Economy ◽  
Financial Burden ◽  
Monte Carlo Model ◽  
Rejection Rate ◽  
Medical Products ◽  
Circular Design

Abstract Introduction/background: The COVID-19 pandemic has led to threatening shortages in the healthcare of medical products such as face masks. Due to this major impact on our healthcare society, an initiative was conducted between March and July 2020 for reprocessing face masks from 19 different hospitals. This exceptional opportunity was used to study the cost impact and the effects of the CO2 footprint of reprocessed face masks relative to new disposable face masks.Aim: The aim of this study is to conduct a life cycle assessment (LCA) to assess and compare the environmental impact of disposed versus reprocessed face masks.Methods: In total, 18,166 high-quality medical FFP2 face masks were reprocessed through steam sterilization between March and July 2020. CO2 emissions equivalent (kg CO2 eq) and other impact categories, such as water consumption during production, transport, sterilisation and end-of-life processes, were assessed. A Monte Carlo model was used to predict the sensitivity of different factors in the whole process on the kg CO2 eq.Results: The average kg CO2 eq appears to be 42% lower for reprocessed face masks based on a rejection rate of 20% than new ones. The sensitivity analysis indicated that the loading capacity of the autoclave and rejection rate of face masks have a large influence on kg CO2 eq. The estimated cost price of a reprocessed mask was €1,40 against €1.55.Discussion: The life cycle assessment (LCA) demonstrates that reprocessed FFP2 face masks from a circular economy perspective have a lower environmental impact on kg CO2 eq and water usage than new face masks. For policymakers, it is important to realize that the CO2 footprint of medical products such as face masks may be reduced by means of circular economy strategies.Conclusion: This study demonstrated a lower environmental impact and financial burden for reprocessed medical face masks than for new face masks without compromising qualifications. Therefore, this study may serve as an inspiration for investigating the reprocessing of other medical products that may become scarce. Finally, this study advocates that circular design engineering principles should be taken into account when designing medical devices. This may lead to more sustainable products that require less CO2, have less water consumption and lower costs.

Application of Life Cycle Assessment in Agricultural Circular Economy

2012 ◽  
Vol 260-261 ◽  
pp. 1086-1091
Author(s):  
Xiao Xian Zhang ◽  
Fang Ma ◽  
Li Wang
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Circular Economy ◽  
Environmental Risks ◽  
Agriculture Policy ◽  
Policy Makers ◽  
Analysis Techniques ◽  
Agricultural Circular Economy ◽  
Technical Framework

Life cycle assessment is a technique to assess potential environmental impacts associated with all the stages of a product, process or service. This paper introduces life cycle assessment into the full process of agricultural circular economy. There are increasing environmental risks associated with agricultural circular economy; however, no appropriate assessment and analysis techniques on environmental impact are available. Due to the lack of special life cycle assessment database and available methodology in agricultural circular economy, we proposed a life cycle assessment technical framework with emphasis on problems associated with traditional agricultural circular economy life cycle assessment. This paper is aimed to produce reliable information on the environmental impact assessment for agriculture policy-makers, producers and consumers to help them choose sustainable development agricultural products and processes.

scholarly journals Environmental Impacts of the Beef Production Chain in the Northeast of Portugal Using Life Cycle Assessment

Agriculture ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 165 ◽  
Author(s):  
Pedro Henrique Presumido ◽  
Fernando Sousa ◽  
Artur Gonçalves ◽  
Tatiane Cristina Dal Bosco ◽  
Manuel Feliciano
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Waste Treatment ◽  
Organic System ◽  
Production Chain ◽  
Iso 14040 ◽  
Use Of Resources ◽  
Solid Waste Treatment ◽  
Negative Impacts

The beef supply chain has multiple negative impacts on the environment. A method widely used to measure impacts from both the use of resources and the emissions generated by this sector is the life cycle assessment (LCA) (ISO 14040). This study aimed to evaluate a semi-intensive system (SIS) and an extensive organic system (EOS), combined with two different slaughterhouses located in the northeast of Portugal. The studied slaughterhouses are similar in size but differ in number of slaughters and in sources of thermal energy: natural gas (Mng) vs. biomass pellets (Mp). Four categories of environmental impact were evaluated: global warming potential (GWP), acidification potential (AP), eutrophication potential (EP), and photochemical ozone creation potential (POCP). As expected, higher impacts were found for SIS for all studied impact categories. Slaughterhouse activities, fertilizer production, and solid waste treatment stages showed little contribution when compared to animal production. Concerning the slaughterhouses activities, the main sources of environmental impact were the use of energy (electric and thermal) and by-products transportation.

scholarly journals Environmental impact analysis of five family houses in Eastern Slovakia through a life cycle assessment

2019 ◽  
Vol 14 (1) ◽  
pp. 81-92
Author(s):  
Andrea Moňoková ◽  
Silvia Vilčeková
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Thermal Insulation ◽  
Reduction Rate ◽  
Mineral Wool ◽  
Product Phase ◽  
Natural Materials ◽  
Concrete Blocks ◽  
Aerated Concrete

Abstract This study performs a life cycle assessment (LCA) of five new family houses in Eastern Slovakia to compare them in terms of the materials and technologies used. The main goal of the analysis is to investigate and highlight the expectable reduction rate of environmental impact resulting from using green materials and technologies. Their environmental impact is determined by using eToolLCD software. The life cycle impact assessment (LCIA) categories of global warming, ozone depletion, acidification, eutrophication and photochemical ozone creation potential are determined within the cradle-to-grave boundary. The examined family houses are built of conventional materials such as aerated concrete blocks, expanded polystyrene (EPS) for thermal insulation and roofing mineral wool, as well as natural materials such as clay, straw, wood, cellulose and vegetation for the roofs. Family houses built of natural materials are characterized by negative emissions of CO2eq in the product phase. Results show that especially the product phase contributes greatly to all environmental impact categories for houses built of conventional materials, such as aerated concrete blocks, mineral wool for thermal insulation, reinforcement concrete and ceramic or concrete tiles.

scholarly journals Environmental Challenges in the Residential Sector: Life Cycle Assessment of Mexican Social Housing

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2837 ◽  
Author(s):  
Gámez-García ◽  
Saldaña-Márquez ◽  
Gómez-Soberón ◽  
Arredondo-Rea ◽  
Gómez-Soberón ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Renewable Resources ◽  
Social Housing ◽  
Construction Sector ◽  
Construction Process ◽  
Residential Sector ◽  
Concrete Blocks ◽  
Interior Walls ◽  
Emission Of Greenhouse Gases

Social Housing (SH) in Mexico has a potentially important role in reducing both the emission of greenhouse gases and the use of non-renewable resources, two of the main challenges facing not only Mexico but the planet as a whole. This work assesses the environmental impact generated by the embodied stages of a typical SH throughout its life cycle (cradle to grave), by means of a Life Cycle Assessment (LCA). Two types of envelope and interior walls and three types of windows are compared. It was found that SH emits 309 kg CO2 eq/m2 and consumes 3911 MJ eq/m2 in the product stages (A1 to A3) and construction process (A4 to A5); the most important stages are those referring to the products, namely, A1 to A3, B4 (replacement) and B2 (maintenance). Additionally, benefits were found in the use of lightweight and thermal materials, such as concrete blocks lightened with pumice or windows made of PVC or wood. Although the use of LCA is incipient in the housing and construction sector in Mexico, this work shows how its application is not only feasible but recommended as it may become a basic tool in the search for sustainability.

scholarly journals The Improvement of Production Process Impact in Furniture Industry Toward Circular Economy

2020 ◽  
Vol 202 ◽  
pp. 07052
Author(s):  
Purnawan Adi Wicaksono ◽  
Choirunisa Ahmad Kadafi
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Production Process ◽  
Circular Economy ◽  
Social Impact ◽  
Consumer Demand ◽  
Social Life Cycle Assessment ◽  
Furniture Industry ◽  
Water Based

Furniture industry is the industry that processes raw or semifinished material from wood, rattan, or other natural material, into products with higher value added and benefit. Because of a rise in consumer demand each year, the furniture industries should have much attention. High consumer demand may cause production process-related problems that damage the environment. Such environmental damage may be caused by waste, raw materials, or production process. High consumer demand in furniture industry brings negative impacts not only to the environment but also to the society. Social impact assessment is needed to evaluate how a product or a process influences workers, consumers, citizen, and value chain. This study uses life cycle assessment method with the help of SimaPro software to determine the environmental impact, and social-life cycle assessment to determine the social impact. The largest contributor to environmental impact is the use of acrylic varnish. Substitution acrylic varnish with woodstain-water based aims to lead to a circular economy by reducing adverse impacts on the environment. The replacement of acrylic varnish with woodstain water based reduces the environmental impact score by 24.8%. Social impacts score on the workers and local community stakeholder are categorized as poor.

scholarly journals Evaluation of the Environmental Benefits Associated with the Addition of Olive Pomace in the Manufacture of Lightweight Aggregates

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2351
Author(s):  
Manuel Uceda-Rodríguez ◽  
Ana B. López-García ◽  
José Manuel Moreno-Maroto ◽  
Carlos Javier Cobo-Ceacero ◽  
María Teresa Cotes-Palomino ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Circular Economy ◽  
Environmental Benefits ◽  
Lightweight Aggregates ◽  
Technological Properties ◽  
Olive Pomace ◽  
Reduction Of Emissions

A Life Cycle Assessment (LCA) using SimaPro software has been carried out concerning the manufacture of artificial lightweight aggregates (LWAs). The study aims to evaluate the changes in the environmental impact when an additive of residual origin, specifically olive pomace (OP), is added following the principles of the Circular Economy. This residue (commonly known as alperujo) was used as a substitute for clay in 1.25, 2.5 and 5 wt%. The environmental impact related to the use of olive pomace in the mixture was estimated using the CML 2000 methodology, yielding improvements of 3.8%, 7.7% and 15.3% for 1.25, 2.5 and 5 wt% OP added, respectively. Optimum addition results are in the range of 1.25 and 2.5 wt% OP. In this way, the reduction of emissions associated with LWA manufacture would be favored without negatively affecting the technological properties of the resulting material.

scholarly journals An Evaluation of Recycled Polymeric Materials Usage in Denim with Lifecycle Assesment Methodology

2021 ◽  
Author(s):  
Sedef Uncu Aki ◽  
Cevza Candan ◽  
Banu Nergis ◽  
Neslihan Sebla Önder
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Circular Economy ◽  
World Economy ◽  
Polymeric Materials ◽  
Raw Material ◽  
Virgin Material ◽  
Material Input

Today, World economy is only 8.6% circular, which creates a huge potential in materials reuse. To close the Emission Gap by 2032, this percentage needs to be doubled. The circular economy ensures that with less virgin material input and fewer emissions. With the help of effective recycling technologies, virgin material use can be decreased and especially petroleum based materials impact can fall within planetary boundaries. This book chapter analyzes different chemical and biological recycling technologies, their advantages and challenges in denim production. Moreover, Life Cycle Assessment (LCA) analysis will be used to evaluate the environmental impact of recycled polymeric materials usage in denim fabrics. Finally, it concludes by challenges and the future of chemically recycled materials in denim production and opportunities to evaluate waste as a raw material to design circular systems.

Sign in / Sign up

Export Citation Format

Share Document