Investigation of the Specific Energy Deposition from Radionuclide-Hydroxyapatite Macroaggregate in Brain Interstitial Implants

2003 ◽  
Vol 254-256 ◽  
pp. 83-86 ◽  
Author(s):  
B.M. Mendes ◽  
T.P.R. Campos
Atomic Energy ◽  
2004 ◽  
Vol 96 (4) ◽  
pp. 275-281 ◽  
Author(s):  
V. V. Vatulin ◽  
A. V. Kunin ◽  
A. A. Golubev ◽  
V. E. Luk'yashin ◽  
V. I. Turtikov ◽  
...  

2008 ◽  
Vol 396-398 ◽  
pp. 721-724 ◽  
Author(s):  
B.M. Mendes ◽  
T.P.R. Campos

Neutron brachytherapy show better results than conventional photon therapy for radioresistant tumors with hypoxic regions. Herein a comparative radiodosimetric analysis is presented considering 125I photon emitter seeds, often applied to brachytherapy, and a proposed Sol-Gel glass, synthesized with incorporated 252Cf neutron emitter, on a brain tumor implant. The proposition is to verify the viability of applying this bioceramic material. The methodology is based on the investigation of the specific energy deposition (dose) from 252Cf-Glass in deep brain interstitial implants through a stochastic computer code (MCNP5) and comparison with 125I seed’s energy deposition. 252Cf-Glass show dose per transition values higher than 125I seed’s set. RBE-isodose curves show a faster decrease of dose with the source distance increasing which can improve healthy tissue sparing.


2019 ◽  
Vol 59 (1) ◽  
pp. 29-62 ◽  
Author(s):  
Werner Hofmann ◽  
Wei Bo Li ◽  
Werner Friedland ◽  
Brian W. Miller ◽  
Balázs Madas ◽  
...  

AbstractAt the tissue level, energy deposition in cells is determined by the microdistribution of alpha-emitting radionuclides in relation to sensitive target cells. Furthermore, the highly localized energy deposition of alpha particle tracks and the limited range of alpha particles in tissue produce a highly inhomogeneous energy deposition in traversed cell nuclei. Thus, energy deposition in cell nuclei in a given tissue is characterized by the probability of alpha particle hits and, in the case of a hit, by the energy deposited there. In classical microdosimetry, the randomness of energy deposition in cellular sites is described by a stochastic quantity, the specific energy, which approximates the macroscopic dose for a sufficiently large number of energy deposition events. Typical examples of the alpha-emitting radionuclides in internal microdosimetry are radon progeny and plutonium in the lungs, plutonium and americium in bones, and radium in targeted radionuclide therapy. Several microdosimetric approaches have been proposed to relate specific energy distributions to radiobiological effects, such as hit-related concepts, LET and track length-based models, effect-specific interpretations of specific energy distributions, such as the dual radiation action theory or the hit-size effectiveness function, and finally track structure models. Since microdosimetry characterizes only the initial step of energy deposition, microdosimetric concepts are most successful in exposure situations where biological effects are dominated by energy deposition, but not by subsequently operating biological mechanisms. Indeed, the simulation of the combined action of physical and biological factors may eventually require the application of track structure models at the nanometer scale.


2020 ◽  
Vol 29 (12) ◽  
pp. 125006
Author(s):  
Yifei Zhu ◽  
Svetlana M Starikovskaia ◽  
Natalia Yu Babaeva ◽  
Mark J Kushner

2008 ◽  
Vol 26 (2) ◽  
pp. 273-286 ◽  
Author(s):  
N.A. Tahir ◽  
V.V. Kim ◽  
A.V. Matvechev ◽  
A.V. Ostrik ◽  
A.V. Shutov ◽  
...  

AbstractSurvival of the production target in successive experiments (with a repetition rate of 1 Hz) over an extended period of time is one of the key problems encountered in designing the Super-FRS (Superconducting Fragment Separator) at the future Facility forAntiprotons and Ion Research (FAIR). Because of the difficulties involved in construction of a liquid jet metal target, it is highly desirable to employ a solid production target at the Super-FRS. However, with the high beam intensities that will be available at the FAIR, the production target may be destroyed in a single experiment due to high specific energy deposition by the beam in the target material. The level of specific energy deposition can be reduced to an acceptable value by increasing the beam focal spot area. However, the spot size is limited by requirements of achieving good isotope resolution and sufficient transmission of the secondary beam through the system. The resolving power of the fragment separator is inversely proportional to the X-dimension of the focal spot whereas the transmission depends on Y-dimension only. It has been previously shown [Tahir et al., 2005c] that an elliptic focal spot with appropriate dimensions, will fulfill the above two conditions simultaneously and will also have a large enough area to reduce the specific energy deposition to an acceptable level for certain beam intensities of interest. In this paper we present numerical simulations of thermodynamic and hydrodynamic behavior of a solid graphite target that is irradiated by 1 GeV/u uranium beam in the intensity range of 1010 –1011 ions per bunch with a bunch length = 50 ns. These simulations have been carried out using a three-dimensional computer code, PIC3D, that includes elastic-plastic effects. This theoretical work has shown that up to a beam intensity of 1011 ions/bunch, one can employ a solid target while for higher intensities the target will be destroyed due to thermal stresses induced by the beam. It has also been found that a circular focal spot leads to minimum thermal stresses as it generates minimum pressure gradients compared to an elliptic focal spot, for the same specific energy deposition. Moreover, the stress level increases with an increase in the ellipticity of the focal spot. It is therefore recommended that one should use a circular focal spot for lower intensities provided that the criteria for isotope resolution and transmission are fulfilled.


2021 ◽  
Vol 2064 (1) ◽  
pp. 012093
Author(s):  
I E Filatov ◽  
D L Kuznetsov ◽  
V V Uvarin

Abstract The paper represents the results of the experimental study of steam methane reforming under the action of spark discharge on water surface. Values of conversion rate and output of reaction products at methane pressures of 1 to 5 atm were obtained, and specific energy consumption of reforming process was determined. Pulse generator with a voltage amplitude up to 200 kV and a pulse duration of 15 ns was used to power the discharge. Although an increase in pressure decreases both the methane conversion rate and the energy deposition into the gas mixture, the conversion efficiency and specific energy consumption remain the same. The obtained minimum value of specific energy consumption for steam methane reforming amounted to 10 eV/molecule.


Sign in / Sign up

Export Citation Format

Share Document