Research on Some Properties of Fly Ash Concrete with Nano-CaCO3 Middle Slurry

2009 ◽  
Vol 405-406 ◽  
pp. 186-190 ◽  
Author(s):  
Kuang Liang Qian ◽  
Tao Meng ◽  
Xiao Qian Qian ◽  
Shu Lin Zhan
Keyword(s):  
Fly Ash ◽  
Chloride Ion ◽  
Test Results ◽  
Hydration Degree ◽  
Fly Ash Concrete

Some long-term properties such as anti-carbonation properties, shrinkage, penetrability of chloride ion of fly ash concrete with nano-CaCO3 middle slurry were studied. Test results showed that the properties of anti-carbonation and impenetrability for chloride of fly ash concrete increased by adding nano-CaCO3 middle slurry because the tiny hole was filled by nano-CaCO3 and the density of concrete increased. But at the same time, the shrinkage of fly ash concrete with and without nano-CaCO3 was the same. Results of SEM also implied the hydration degree of fly ash could be increased by nano-CaCO3.

Long term mechanical performance of nano-engineered high volume fly ash concrete

2021 ◽  
pp. 103168
Author(s):  
Charith Herath ◽  
Chamila Gunasekara ◽  
David W. Law ◽  
Sujeeva Setunge
Keyword(s):  
Fly Ash ◽  
Mechanical Performance ◽  
High Volume ◽  
Fly Ash Concrete ◽  
High Volume Fly Ash

scholarly journals Effect of Fly Ash as Cement Replacement on Chloride Diffusion, Chloride Binding Capacity, and Micro-Properties of Concrete in a Water Soaking Environment

2020 ◽  
Vol 10 (18) ◽  
pp. 6271 ◽  
Author(s):  
Jun Liu ◽  
Jiaying Liu ◽  
Zhenyu Huang ◽  
Jihua Zhu ◽  
Wei Liu ◽  
...  
Keyword(s):  
Diffusion Coefficient ◽  
Fly Ash ◽  
Binding Capacity ◽  
Chloride Ion ◽  
Chloride Content ◽  
Chloride Ions ◽  
Chloride Diffusion ◽  
Chloride Binding ◽  
Test Results ◽  
New Equation

This paper experimentally studies the effects of fly ash on the diffusion, bonding, and micro-properties of chloride penetration in concrete in a water soaking environment based on the natural diffusion law. Different fly ash replacement ratio of cement in normal concrete was investigated. The effect of fly ash on chloride transportation, diffusion, coefficient, free chloride content, and binding chloride content were quantified, and the concrete porosity and microstructure were also reported through mercury intrusion perimetry and scanning electron microscopy, respectively. It was concluded from the test results that fly ash particles and hydration products (filling and pozzolanic effects) led to the densification of microstructures in concrete. The addition of fly ash greatly reduced the deposition of chloride ions. The chloride ion diffusion coefficient considerably decreased with increasing fly ash replacement, and fly ash benefits the binding of chloride in concrete. Additionally, a new equation is proposed to predict chloride binding capacity based on the test results.

Prediction Model for Cementing Efficiency of Fly Ash Concrete by Statistical Analyses

2011 ◽  
Vol 250-253 ◽  
pp. 1293-1296 ◽  
Author(s):  
Hong Bum Cho ◽  
Nam Yong Jee
Keyword(s):  
Fly Ash ◽  
Prediction Model ◽  
Statistical Analyses ◽  
Test Results ◽  
Construction Sites ◽  
K Value ◽  
Fly Ash Concrete ◽  
Mix Proportion ◽  
Wide Range ◽  
Binder Ratio

This paper offers the model that can estimate the cementing efficiency of fly ash (k value) based on a mix proportion of concrete containing fly ash (FA). The prediction model was derived using various statistical analyses, based on a wide range of mix proportions and a number of strength test results of ready mixed concretes used in eight construction sites. The k value increases with increasing water-binder ratio. As the FA replacement ratios increase, the k value increases at FA replacement ratios of less than 15%, but decreases at ratios of 15% or more. The k values obtained from the cementing efficiency estimate model range from 0.1 to 2.1.

Study on the Strength of Sea Sand Concrete in Ningbo

2011 ◽  
Vol 250-253 ◽  
pp. 262-265
Author(s):  
Jun Zhe Liu ◽  
Guo Liang Zhang ◽  
Jian Bin Chen ◽  
Zhi Min He
Keyword(s):  
Fly Ash ◽  
Influence Factor ◽  
Concrete Strength ◽  
Chloride Ion ◽  
Strength Development ◽  
Term Strength ◽  
Two Phase ◽  
Sea Sand ◽  
Early Strength

This paper mainly explain and expounded folding compressive strength of the different types of sea sand mortar , fly ash to the sea sand concretes mortar intensity influence as well as the chloride ion content to the sea sand concretes mortar intensity influence. The pulverized fly ash has the postponement function to the sea sand concretes early strength, the chloride ion has the promoter action to the sea sand concretes early strength. 20% pulverized fly ash be good to the sea sand concretes long-term strength development influence, can achieve the goal which enhances the sea sand concretes the long-term strength . The chloride ion is greater to the concretes early strength influence, especially in previous 3 days. Along with the time development, the chloride ion influence weakens, but the pulverized fly ash enlarges to the concretes intensity's influence factor. A two-phase arrived, the final concrete strength values close to each other.

Experimental Study on Sustainable Concrete with the Mixture of Low Calcium Fly Ash and Lime as a Partial Replacement of Cement

2011 ◽  
Vol 250-253 ◽  
pp. 307-312 ◽  
Author(s):  
Muthuramalingam Jayakumar ◽  
M. Salman Abdullahi
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Water Absorption ◽  
Chloride Ion ◽  
Apparent Volume ◽  
Partial Replacement ◽  
Fly Ash Concrete ◽  
Low Calcium ◽  
Chloride Ion Penetration ◽  
Ion Penetration

Even though the use of fly ash in concrete is nowadays a common practice, its relatively slow pozzolanic reactivity hinders its greater utilization; hence efficient methods of activation are on demand. This study was carried out to evaluate the influence of lime as a chemical activator on the mechanical and durability properties of high strength fly ash concrete. Mixtures were made with 0, 30, 40, and 50% of cement replaced by low calcium fly ash. Corresponding mixtures were also made with the same amount of fly ash and addition of 10% of lime to each mixture. For each concrete mixture, slump, compressive strength, water absorption, sorptivity, apparent volume of permeable voids, and resistance to chloride-ion penetration were measured. The results obtained showed that addition of lime improved the compressive strength significantly at all ages. The strength of all the fly ash mixtures containing lime surpassed that of the corresponding Portland cement mix at 60 days. Addition of lime also improved the sorptivity and resistance to chloride-ion penetration of the fly ash concrete. It however increases the water absorption and the volume of permeable voids of the fly ash concrete.

scholarly journals Long-term Durability Characteristics of Fly ash Concrete Containing Lightly Burnt MgO Powder

2013 ◽  
Vol 33 (3) ◽  
pp. 909-916
Author(s):  
Bong-Seok Jang ◽  
Seul-Woo Choi ◽  
Kwang-Myong Lee
Keyword(s):  
Fly Ash ◽  
Fly Ash Concrete

Development of the HVFAC Modulus of Elasticity

2019 ◽  
Vol 296 ◽  
pp. 155-160
Author(s):  
Martin Ťažký ◽  
Lucia Osuská ◽  
Rudolf Hela
Keyword(s):  
Fly Ash ◽  
High Volume ◽  
Pozzolanic Reaction ◽  
Strength Parameters ◽  
Fly Ash Concrete ◽  
Static Modulus ◽  
High Volume Fly Ash ◽  
Active Admixture ◽  
Term Monitoring

Concretes with high fly ash content are within a unified world nomenclature often referred to as HVFAC, resp. high volume fly ash concrete. These concretes are characterized by the percentage of fly ash as an active admixture relative to a cement dose of at least in a ratio of 1:1. The use of these concretes falls into the field of construction with the necessary reduction in the development of hydration heat. In the experiment, long-term monitoring of the development of important mechanical parameters, namely the static modulus of compressive elasticity and compressive strength, was performed. Both monitored parameters play a very important role in the design of buildings, for which construction is HVFAC often used. These parameters were monitored within the carried out research until the time of 360 days. The results of the experiment give an overview of the pozzolanic reaction progress over the in the long-term time horizon and its impact on the concrete parameters monitored. The results clearly show that even after 360 days the development of the strength parameters of these concretes is not stopped.

Sign in / Sign up

Export Citation Format

Share Document