The Research and Application of 3D Laser Scanning Measurement Technology in Forestry

2009 ◽  
Vol 419-420 ◽  
pp. 301-304
Author(s):  
Li Fu Zhang ◽  
Huai Min Lu
Keyword(s):  
Forest Inventory ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Measurement Technology ◽  
3D Laser Scanning ◽  
Scanner Data ◽  
Tree Diameter ◽  
Breast Height ◽  
Laser Data

In order to measure forest inventory, we propose an approach that enables automatic, fast and accurate tree trunks segmentation from three-dimensional (3-D) laser data. Results have been demonstrated in real-time on-board a round mobile robot. At the same time, we propose an approach to estimate tree diameter at breast height (dbh) that was tested off-line on a variety of ground laser scanner data, so it is very suitable for being popularized in forestry section.

3D Laser Scanner Techniques

2011 ◽  
pp. 500-527
Author(s):  
Mercedes Farjas ◽  
Jesús Martinez-Frias ◽  
Jose María Hierro
Keyword(s):  
Morphological Study ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Laser Scanner ◽  
3D Laser Scanning ◽  
The Subject ◽  
First Time ◽  
Non Destructive ◽  
Arbitrary Objects ◽  
Scanning Systems

The use of 3D scanning systems for acquiring and analyzing the external shape features of arbitrary objects has different applications in different cultural, scientific, and technological fields. In this work, 3D laser scanning techniques are used, for the first time, to our knowledge, as a novel and non-destructive application for the morphological study of meteorite impact rocks. The subject of the study was a rock displaying impact textures and associated with the Karikkoselkä impact crater (Finland) (Lehtinen et al. 1996). This methodology permitted: (1) a computerized three-dimensional modelling to be carried out on the bulk impact-related rock; (2) other more specific characterizations to be performed, such as detailed topographic studies of its surface impact features; (3) some physical properties of the rock to be determined (volume); (4) the shatter cone impact texture to be completed with a realistic estimation of its convergence angle; and (5) a broad demonstration of the significance and effectiveness of 3D laser scanning techniques as a complementary tool for the study of this type of meteoritic impact-related rocks.

scholarly journals Roadway Stability Evaluation on the Basis of Modern Monitoring of Displacement

2015 ◽  
Vol 37 (1) ◽  
pp. 45-52 ◽  
Author(s):  
Tadeusz Majcherczyk ◽  
Zbigniew Niedbalski ◽  
Artur Ulaszek
Keyword(s):  
Laser Scanning ◽  
Three Dimensional ◽  
Point Clouds ◽  
Measurement Technology ◽  
Stability Evaluation ◽  
3D Laser Scanning ◽  
Roadway Stability ◽  
Measurement Results ◽  
Comparison Of The Results ◽  
Cloud Of Points

Abstract The paper presents the application of a 3D laser measurement technology in a modern monitoring of roadways. The authors analyze the possibility of using a three-dimensional scanning measurement of longwall working dimensions. The measurement results are presented in the form of a cloud of points obtained from a 3D laser scanning. The paper also presents a comparison of the results obtained from the convergence of traditionally-made measurements with the measurements derived from the threedimensional scanning and discusses possible methods of comparing different point clouds.

Measurement of erosion state and refractory lining thickness of blast furnace hearth by using three-dimensional laser scanning method

2020 ◽  
Vol 118 (1) ◽  
pp. 106
Author(s):  
Lei Zhang ◽  
Jianliang Zhang ◽  
Kexin Jiao ◽  
Guoli Jia ◽  
Jian Gong ◽  
...  
Keyword(s):  
Blast Furnace ◽  
Laser Scanning ◽  
Refractory Lining ◽  
Three Dimensional ◽  
3D Laser Scanning ◽  
Scanning Method ◽  
Blast Furnace Production ◽  
Severe Erosion ◽  
Residual Thickness ◽  
Minimum Depth

The three-dimensional (3D) model of erosion state of blast furnace (BF) hearth was obtained by using 3D laser scanning method. The thickness of refractory lining can be measured anywhere and the erosion curves were extracted both in the circumferential and height directions to analyze the erosion characteristics. The results show that the most eroded positions located below 20# tuyere with an elevation of 7700 mm and below 24#–25# tuyere with an elevation of 8100 mm, the residual thickness here is only 295 mm. In the circumferential directions, the serious eroded areas located between every two tapholes while the taphole areas were protected well by the bonding material. In the height directions, the severe erosion areas located between the elevation of 7600 mm to 8200 mm. According to the calculation, the minimum depth to ensure the deadman floats in the hearth is 2581 mm, corresponding to the elevation of 7619 mm. It can be considered that during the blast furnace production process, the deadman has been sinking to the bottom of BF hearth and the erosion areas gradually formed at the root of deadman.

scholarly journals Using Airborne Light Detection and Ranging (LIDAR) to Characterize Forest Stand Condition on the Kenai Peninsula of Alaska

2009 ◽  
Vol 24 (2) ◽  
pp. 95-102 ◽  
Author(s):  
Hans-Erik Andersen
Keyword(s):  
Forest Inventory ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Grid Cell ◽  
Forest Stand ◽  
Light Detection And Ranging ◽  
Inventory Analysis ◽  
Light Detection ◽  
Individual Tree ◽  
Kenai Peninsula

Abstract Airborne laser scanning (also known as light detection and ranging or LIDAR) data were used to estimate three fundamental forest stand condition classes (forest stand size, land cover type, and canopy closure) at 32 Forest Inventory Analysis (FIA) plots distributed over the Kenai Peninsula of Alaska. Individual tree crown segment attributes (height, area, and species type) were derived from the three-dimensional LIDAR point cloud, LIDAR-based canopy height models, and LIDAR return intensity information. The LIDAR-based crown segment and canopy cover information was then used to estimate condition classes at each 10-m grid cell on a 300 × 300-m area surrounding each FIA plot. A quantitative comparison of the LIDAR- and field-based condition classifications at the subplot centers indicates that LIDAR has potential as a useful sampling tool in an operational forest inventory program.

scholarly journals 3D laser scanning and digital restoration of an archaeological find

2018 ◽  
Vol 178 ◽  
pp. 03013 ◽  
Author(s):  
Stergios Fragkos ◽  
Emanuel Tzimtzimis ◽  
Dimitrios Tzetzis ◽  
Oana Dodun ◽  
Panagiotis Kyratsis
Keyword(s):  
3D Printing ◽  
Laser Scanning ◽  
Three Dimensional ◽  
3D Laser Scanning ◽  
Analytical Methodology ◽  
3D Cad ◽  
Digital Restoration ◽  
Computer Based ◽  
Ancient Ceramic ◽  
Digital Archaeology

The current paper demonstrates the digital recreation and 3D printing of a missing fragment of an ancient ceramic pottery following digitization using a three dimensional laser scanning. The resulting pointcloud of the laser scans was treated with a series of advanced software for the creation of surfaces and ultimately for a digital model. An analytical methodology is presented revealing the step by step approach, which is an innovative way of recreating a missing fragment. Such approach aims to demonstrate the level of contribution that the ever evolving computer based technologies and 3D printing could bring to cultural heritage. The reverse engineering method presented for the reconstruction of a ceramic pottery, which is a part of the larger field of digital archaeology, is believed to benefit a variety of interested parties including 3D CAD users and designers, archaeologists and museum curators.

scholarly journals UAV and terrestrial laser scanner data processing for large scale topographic mapping

2020 ◽  
Vol 50 ◽  
pp. 63-73
Author(s):  
Ganbold Ulziisaikhan ◽  
Dash Oyuntsetseg
Keyword(s):  
Data Processing ◽  
Spatial Data ◽  
Large Scale ◽  
Laser Scanner ◽  
Measurement Technology ◽  
Topographic Mapping ◽  
Terrestrial Laser Scanner ◽  
Scanner Data ◽  
Processing Scheme ◽  
Digital Elevation

Integrating spatial data from different sources results in visualization, which is the last step in the process of digital basic topographic map creation. Digital elevation model and visualization will used for geomorphological mapping, geospatial database, urban planning and etc. Large scale topographic mapping in the world countries is really a prominent challenge in geospatial industries today. The purpose of this work is to integrate laser scanner data with the ones generated by aerial photogrammetry from UAV, to produce detailed maps that can used by geodetic engineers to optimize their analysis. In addition, terrestrial - based LiDAR scans and UAV photogrammetric data were collected in Sharga hill in the north zone of Mongolia. In this paper, different measurement technology and processing software systems combined for topographic mapping in the data processing scheme. UTM (Universal Transverse Mercator) projected coordinate system calculated in WGS84 reference ellipsoid. Feature compilation involving terrestrial laser scanner data and UAV data will integrated to offer Digital Elevation Models (DEM) as the main interest of the topographic mapping activity. Used UAV generate high-resolution orthomosaics and detailed 3D models of areas where no data, are available. That result issued to create topographic maps with a scale of 1:1000 of geodetic measurements. Preliminary results indicate that discontinuity data collection from UAV closely matches the data collected using laser scanner.

scholarly journals 3D MODELS OF OBJECTS IN PROCESS OF RECONSTRUCTION

2018 ◽  
Vol 13 (1) ◽  
Author(s):  
Jovana Radović
Keyword(s):  
Laser Scanning ◽  
Laser System ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Terrestrial Laser Scanning ◽  
3D Models ◽  
Terrestrial Laser Scanner ◽  
Accurate Data ◽  
Final Model ◽  
Airborne Laser

Within the last years terrestrial and airborne laser scanning has become a powerful technique for fast and efficient three-dimensional data acquisition of different kinds of objects. Airborne laser system (LiDAR) collects accurate georeferenced data of extremely large areas very quickly while the terrestrial laser scanner produces dense and geometrically accurate data. The combination of these two segments of laser scanning provides different areas of application. One of the applications is in the process of reconstruction of objects. Objects recorded with laser scanning technology and transferred into the final model represent the basis for building an object as it was original. In this paper, there will be shown two case studies based on usage of airborne and terrestrial laser scanning and processing of the data collected by them.

scholarly journals On the utilization of novel spectral laser scanning for three-dimensional classification of vegetation elements

2018 ◽  
Vol 8 (2) ◽  
pp. 20170039 ◽  
Author(s):  
Zhan Li ◽  
Michael Schaefer ◽  
Alan Strahler ◽  
Crystal Schaaf ◽  
David Jupp
Keyword(s):  
Laser Scanning ◽  
Spatial Information ◽  
Information Source ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Biochemical Properties ◽  
Dual Wavelength ◽  
Wavelength Scanning ◽  
Spatial Attributes

The Dual-Wavelength Echidna Lidar (DWEL), a full waveform terrestrial laser scanner (TLS), has been used to scan a variety of forested and agricultural environments. From these scanning campaigns, we summarize the benefits and challenges given by DWEL's novel coaxial dual-wavelength scanning technology, particularly for the three-dimensional (3D) classification of vegetation elements. Simultaneous scanning at both 1064 nm and 1548 nm by DWEL instruments provides a new spectral dimension to TLS data that joins the 3D spatial dimension of lidar as an information source. Our point cloud classification algorithm explores the utilization of both spectral and spatial attributes of individual points from DWEL scans and highlights the strengths and weaknesses of each attribute domain. The spectral and spatial attributes for vegetation element classification each perform better in different parts of vegetation (canopy interior, fine branches, coarse trunks, etc.) and under different vegetation conditions (dead or live, leaf-on or leaf-off, water content, etc.). These environmental characteristics of vegetation, convolved with the lidar instrument specifications and lidar data quality, result in the actual capabilities of spectral and spatial attributes to classify vegetation elements in 3D space. The spectral and spatial information domains thus complement each other in the classification process. The joint use of both not only enhances the classification accuracy but also reduces its variance across the multiple vegetation types we have examined, highlighting the value of the DWEL as a new source of 3D spectral information. Wider deployment of the DWEL instruments is in practice currently held back by challenges in instrument development and the demands of data processing required by coaxial dual- or multi-wavelength scanning. But the simultaneous 3D acquisition of both spectral and spatial features, offered by new multispectral scanning instruments such as the DWEL, opens doors to study biophysical and biochemical properties of forested and agricultural ecosystems at more detailed scales.

Design of Light-Small Mobile 3D Laser Measurement System

2013 ◽  
Vol 405-408 ◽  
pp. 3032-3036
Author(s):  
Yi Bo Sun ◽  
Xin Qi Zheng ◽  
Zong Ren Jia ◽  
Gang Ai
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Digital Camera ◽  
Scanning System ◽  
Point Cloud Data ◽  
3D Laser Scanning ◽  
Large Area ◽  
Cloud Data ◽  
Laser Scanning System

At present, most of the commercial 3D laser scanning measurement systems do work for a large area and a big scene, but few shows their advantage in the small area or small scene. In order to solve this shortage, we design a light-small mobile 3D laser scanning system, which integrates GPS, INS, laser scanner and digital camera and other sensors, to generate the Point Cloud data of the target through data filtering and fusion. This system can be mounted on airborne or terrestrial small mobile platform and enables to achieve the goal of getting Point Cloud data rapidly and reconstructing the real 3D model. Compared to the existing mobile 3D laser scanning system, the system we designed has high precision but lower cost, smaller hardware and more flexible.

scholarly journals Investigations on intra-annual elevation changes using multi-temporal airborne laser scanning data: case study Engabreen, Norway

2005 ◽  
Vol 42 ◽  
pp. 195-201 ◽  
Author(s):  
Thomas Geist ◽  
Hallgeir Elvehøy ◽  
Miriam Jackson ◽  
Johann Stötter
Keyword(s):  
Mass Balance ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Remote Sensing Data ◽  
Control Area ◽  
Airborne Laser Scanning ◽  
Time Interval ◽  
Scanner Data ◽  
Glacier Surface ◽  
Airborne Laser

AbstractKey issues of glacier monitoring are changes in glacier geometry and glacier mass. As accurate direct measurements are costly and time-consuming, the use of various remote-sensing data for glacier monitoring is explored. One technology used and described here is airborne laser scanning. The method enables the derivation of high-quality digital elevation models (DEMs) with a vertical and horizontal accuracy in the sub-metre range. Between September 2001 and August 2002, three laser scanner data acquisition flights were carried out, covering the whole area of Engabreen, Norway, and corresponding well to the measurement dates for the mass-balance year 2001/02. The data quality of the DEMs is assessed (e.g. by comparing the values with a control area which has been surveyed independently or GPS ground profiles measured during the flights). For the whole glacier, surface elevation change and consequently volume change is calculated, quantified and compared with traditional mass-balance data for the same time interval. For the winter term, emergence/submergence velocity is determined from laser scanner data and snow-depth data and is compared with velocity measurements at stakes. The investigations reveal the high potential of airborne laser scanning for measuring the extent and the topography of glaciers as well as changes in geometry (Δarea, Δvolume).

Sign in / Sign up

Export Citation Format

Share Document